I am trying to deploy my app to a remote host - it was working fine and suddenly I get a lot of errors.
-----------------------------------STDERR-----------------------------------
./deps/libexpat/lib/xmltok.c:186:21: note: ‘isName2’ declared here
int (PTRFASTCALL *isName2)(const ENCODING *, const char *);
^
-----------------------------------STDERR-----------------------------------
./deps/libexpat/lib/xmltok.c:186:21: note: ‘isName2’ declared here
int (PTRFASTCALL *isName2)(const ENCODING *, const char *);
^
../deps/libexpat/lib/xmltok.c:890:1: warning: missing initializer for field ‘isName2’ of ‘const struct normal_encoding’ [-Wmissing-field-initializers]
};
^
../deps/libexpat/lib/xmltok.c:186:21: note: ‘isName2’ declared here
int (PTRFASTCALL *isName2)(const ENCODING *, const char *);
^
npm WARN package.json meteor-dev-bundle#0.0.0 No description
npm WARN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0
curl: (6) Could not resolve host: localhost
Latest deployment failed! Reverted back to the previous version.
-----------------------------------STDOUT-----------------------------------
est#2.51.0, gtoken#1.2.0)
../deps/libexpat/lib/xmltok.c:890:1: warning: missing initializer for field ‘isName2’ of ‘const struct normal_encoding’ [-Wmissing-field-initializers]
};
^
../deps/libexpat/lib/xmltok.c:186:21: note: ‘isName2’ declared here
int (PTRFASTCALL *isName2)(const ENCODING *, const char *);
^
npm WARN package.json meteor-dev-bundle#0.0.0 No description
npm WARN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (6) Could not resolve host: localhost
Latest deployment failed! Reverted back to the previous version.
-----------------------------------STDOUT-----------------------------------
est#2.51.0, gtoken#1.2.0)
I think this might be the related thing I would try first.
https://github.com/arunoda/meteor-up#updating
...if you need to update your Node version, you'll have to run "mup setup" again before deploying.
You may have easily forgotten that.
Related
I am using meteor 1.2.1 version.
I want to used node js package in meteor, So i add npm-container meteor package .
But after adding this package in meteor project, this give the below error on deployment time(mup deploy).
[101.100.1.200] - Invoking deployment process
[101.100.1.200] x Invoking deployment process: FAILED
-----------------------------------STDERR-------------------------------
RN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
../src/coroutine.cc: In function `void* find_thread_id_key(void*)':
../src/coroutine.cc:64:53: warning: comparison of unsigned expression >=
0 is always true [-Wtype-limits]
for (pthread_key_t ii = coro_thread_key - 1; ii >= 0; --ii) {
^
../src/coroutine.cc:90:3: warning: `thread_id' may be used uninitialized
in this function [-Wmaybe-uninitialized]
if (tls == thread_id) {
^
js-bson: Failed to load c++ bson extension, using pure JS version
% Total % Received % Xferd Average Speed Time Time Time
Current
Dload Upload Total Spent Left
Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0cu
rl: (7) Failed to connect to localhost port 8456: Connection refused
Latest deployment failed! Reverted back to the previous version.
-----------------------------------STDOUT-------------------------------
lk#0.5.1 node_modules/chalk
escape-string-regexp#1.0.3 node_modules/escape-string-regexp
supports-color#0.2.0 node_modules/supports-color
has-ansi#0.1.0 node_modules/has-ansi
strip-ansi#0.3.0 node_modules/strip-ansi
eachline#2.3.3 node_modules/eachline
type-of#2.0.1 node_modules/type-of
amdefine#1.0.0 node_modules/amdefine
asap#2.0.3 node_modules/asap
underscore#1.5.2 node_modules/underscore
meteor-promise#0.5.0 node_modules/meteor-promise
promise#7.0.4 node_modules/promise
source-map-support#0.3.2 node_modules/source-map-support
semver#4.1.0 node_modules/semver
source-map#0.1.32 node_modules/source-map
fibers#1.0.5 node_modules/fibers
Waiting for MongoDB to initialize. (5 minutes)
{ [Error: Cannot find module '../build/Release/bson'] code: 'MODULE_NOT_
FOUND' }
connected
Project-Name stop/waiting
Project-Name start/running, process 23426
Waiting for 100 seconds while app is booting up
Checking is app booted or not?
Project-Name stop/waiting
Project-Name start/running, process 25162
I want to deploy a meteor app (v1.2) to digital ocean. I am using MUP with this tutorial.
When I run mup deploy verbose I get this error (see below). I tried this as well being how i am on linux. meteor build myAppHere --architecture os.linux.x86_64 . But I still get the error.
Any ideas?
Started TaskList: Deploy app 'myAppHere' (linux)
[162.243.58.84] - Uploading bundle
[162.243.58.84] - Uploading bundle: SUCCESS
[162.243.58.84] - Setting up Environment Variables
[162.243.58.84] - Setting up Environment Variables: SUCCESS
[162.243.58.84] - Invoking deployment process
[162.243.58.84] x Invoking deployment process: FAILED
-----------------------------------STDERR-----------------------------------
ile=node.lib',
gyp info spawn args '-Dmodule_root_dir=/opt/myAppHere/tmp/bundle/programs/server/npm/npm-bcrypt/node_modules/bcrypt',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.' ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
gyp info ok
npm WARN package.json meteor-dev-bundle#0.0.0 No description
npm WARN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
stop: Unknown instance:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed to connect to localhost port 81: Connection refused
Latest deployment failed! Reverted back to the previous version.
What is your node version? Most probably installed nodejs version is old. You can try with "nodeVersion": "0.10.40" in your mup.json
Trying to deploy my meteorJS app to digital ocean droplet under Ubuntu 14.04 with the help of Meteor Up
mup init is sucessful but when I deploy I have:
-----------------------------------STDERR-----------------------------------
npm WARN package.json meteor-dev-bundle#0.0.0 No description
npm WARN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
js-bson: Failed to load c++ bson extension, using pure JS version
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed to connect to localhost port 80: Connection refused
Latest deployment failed! Reverted back to the previous version.
-----------------------------------STDOUT-----------------------------------
/ansi-styles
chalk#0.5.1 node_modules/chalk
escape-string-regexp#1.0.3 node_modules/escape-string-regexp
strip-ansi#0.3.0 node_modules/strip-ansi
has-ansi#0.1.0 node_modules/has-ansi
supports-color#0.2.0 node_modules/supports-color
eachline#2.3.3 node_modules/eachline
type-of#2.0.1 node_modules/type-of
amdefine#1.0.0 node_modules/amdefine
asap#2.0.3 node_modules/asap
underscore#1.5.2 node_modules/underscore
meteor-promise#0.5.0 node_modules/meteor-promise
promise#7.0.4 node_modules/promise
source-map-support#0.3.2 node_modules/source-map-support
semver#4.1.0 node_modules/semver
source-map#0.1.32 node_modules/source-map
fibers#1.0.5 node_modules/fibers
Waiting for MongoDB to initialize. (5 minutes)
{ [Error: Cannot find module '../build/Release/bson'] code: 'MODULE_NOT_FOUND' }
connected
admin stop/waiting
admin start/running, process 14399
Waiting for 30 seconds while app is booting up
Checking is app booted or not?
admin stop/waiting
admin start/running, process 14542
----------------------------------------------------------------------------
Config :
node -v
v0.10.40
npm list bson
└── bson#0.4.20
I've seen a lot of issue resolved by changing
bson = require('../build/Release/bson');
to
bson = require('../browser_build/bson');
But where do I find my node_module ? I have one directory at the root of my app but in this directory I don't even have /build only browser_build so I can"t try this fix ...
using command line too mup deploy, my meteor application no longer deploys to digital ocean. the error is here:
x Invoking deployment process: FAILED
-----------------------------------STDERR-----------------------------------
npm WARN package.json meteor-dev-bundle#0.0.0 No description
npm WARN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed to connect to localhost port 80: Connection refused
Latest deployment failed! Reverted back to the previous version.
-----------------------------------STDOUT-----------------------------------
.1.0 node_modules/ansi-styles
chalk#0.5.1 node_modules/chalk
escape-string-regexp#1.0.3 node_modules/escape-string-regexp
supports-color#0.2.0 node_modules/supports-color
has-ansi#0.1.0 node_modules/has-ansi
strip-ansi#0.3.0 node_modules/strip-ansi
eachline#2.3.3 node_modules/eachline
type-of#2.0.1 node_modules/type-of
amdefine#1.0.0 node_modules/amdefine
asap#2.0.3 node_modules/asap
underscore#1.5.2 node_modules/underscore
meteor-promise#0.5.0 node_modules/meteor-promise
promise#7.0.4 node_modules/promise
source-map-support#0.3.2 node_modules/source-map-support
semver#4.1.0 node_modules/semver
source-map#0.1.32 node_modules/source-map
fibers#1.0.5 node_modules/fibers
If anyone could help, that would be amazing. +100 for you.
I upgraded a project to Meteor 1.2 and suddenly I was receiving same error as you when I tried to deploy. After failing to find a solution, I seen a comment on a similar issue that suggest trying mupx. I installed mupx and followed the migration guide https://github.com/arunoda/meteor-up/tree/mupx#migrating-from-meteor-up-0x and I can deploy again.
I am experiencing failure every time I try to deploy to either an AWS/EC2 instance or a Digital Ocean droplet. With the EC2 instance I am using a pem file and with the droplet I am using password access. There were a lot of hoops to jump through to get through the mup setup, but that is finally successful on both instances. It's the mup deploy that fails on the Invoking deployment process: step.
Here's my mup.json for the droplet:
{
// Server authentication info
"servers": [
{
"host": "xx.xx.xx.xx",
"username": "root",
"password": "notmypassword"
// or pem file (ssh based authentication)
//"pem": "~/.ssh/id_rsa"
//"pem": "/users/alex/dropbox/awspems/projectmanager.pem"
}
],
// Install MongoDB in the server, does not destroy local MongoDB on future setup
"setupMongo": true,
// WARNING: Node.js is required! Only skip if you already have Node.js installed on server.
"setupNode": true,
// WARNING: If nodeVersion omitted will setup 0.10.33 by default. Do not use v, only version number.
"nodeVersion": "0.10.35",
// Install PhantomJS in the server
"setupPhantom": true,
// Application name (No spaces)
"appName": "projectmanager",
// Location of app (local directory)
"app": "/users/alex/dropbox/projectmanager",
// Configure environment
"env": {
"ROOT_URL": "http://xx.xx.xx.xx"
},
// Meteor Up checks if the app comes online just after the deployment
// before mup checks that, it will wait for no. of seconds configured below
"deployCheckWaitTime": 30
}
The following messages appear whether in the EC2 instance or the droplet instance:
Claire-MacAir-7:projectmanager alex$ mup deploy
Meteor Up: Production Quality Meteor Deployments
------------------------------------------------
“ Checkout Kadira!
It's the best way to monitor performance of your app.
Visit: https://kadira.io/mup ”
Building Started: /users/notmyusername/dropbox/projectmanager
Started TaskList: Deploy app 'projectmanager' (linux)
[xx.xx.xx.xx] - Uploading bundle
[xx.xx.xx.xx] ✔ Uploading bundle: SUCCESS
[xx.xx.xx.xx] - Setting up Environment Variables
[xx.xx.xx.xx] ✔ Setting up Environment Variables: SUCCESS
[xx.xx.xx.xx] - Invoking deployment process
[xx.xx.xx.xx] ✘ Invoking deployment process: FAILED
-----------------------------------STDERR-----------------------------------
ir=/root/.node-gyp/0.10.35',
gyp info spawn args '-Dmodule_root_dir=/opt/projectmanager/tmp/bundle/programs/server/npm/npm-bcrypt/node_modules/bcrypt',
gyp info spawn args '--depth=.',
gyp info spawn args '--no-parallel',
gyp info spawn args '--generator-output',
gyp info spawn args 'build',
gyp info spawn args '-Goutput_dir=.' ]
gyp info spawn make
gyp info spawn args [ 'BUILDTYPE=Release', '-C', 'build' ]
gyp info ok
npm WARN package.json meteor-dev-bundle#0.0.0 No description
npm WARN package.json meteor-dev-bundle#0.0.0 No repository field.
npm WARN package.json meteor-dev-bundle#0.0.0 No README data
stop: Unknown instance:
% Total % Received % Xferd Average Speed Time Time Time Current
Dload Upload Total Spent Left Speed
0 0 0 0 0 0 0 0 --:--:-- --:--:-- --:--:-- 0curl: (7) Failed to connect to localhost port 80: Connection refused
App did not pick up! Please check app logs.
-----------------------------------STDOUT-----------------------------------
LE(target) Release/obj.target/bcrypt_lib.node: Finished
COPY Release/bcrypt_lib.node
make: Leaving directory `/opt/projectmanager/tmp/bundle/programs/server/npm/npm-bcrypt/node_modules/bcrypt/build'
> fibers#1.0.1 install /opt/projectmanager/tmp/bundle/programs/server/node_modules/fibers
> node ./build.js
`linux-x64-v8-3.14` exists; testing
Binary is fine; exiting
underscore#1.5.2 node_modules/underscore
semver#4.1.0 node_modules/semver
chalk#0.5.1 node_modules/chalk
├── escape-string-regexp#1.0.2
├── ansi-styles#1.1.0
├── supports-color#0.2.0
├── strip-ansi#0.3.0 (ansi-regex#0.2.1)
└── has-ansi#0.1.0 (ansi-regex#0.2.1)
eachline#2.3.3 node_modules/eachline
└── type-of#2.0.1
source-map-support#0.2.8 node_modules/source-map-support
└── source-map#0.1.32 (amdefine#0.1.0)
fibers#1.0.1 node_modules/fibers
Waiting for MongoDB to initialize. (5 minutes)
connected
projectmanager start/running, process 11786
Waiting for 30 seconds while app is booting up
Checking is app booted or not?
----------------------------------------------------------------------------
Completed TaskList: Deploy app 'projectmanager' (linux)
The project works perfectly with no errors on my localhost.
Any ideas?
Thanks in advance, Alex Adams
And the solution is:
The mup logs showed that it didn't like a path designated for a folder to hold uploaded files. I changed the app to use GridFS, thus storing the files in the database. The app deploys correctly now.