Related
I am running a simulation study in R. Occassionally, my simulation study produces an error message. As I implemented my simulation study in a function, the simulation stops when this error message occurs. I know that it is bad practice to suppress errors, but at this moment to me there is no other option than to suppress the error and then go on with the next simulation until the total number of simulations I like to run. To do this, I have to suppress the error message R produces.
To do this, I tried different things:
library(base64)
suppressWarnings
suppressMessages
options(error = expression(NULL))
In the first two options, only warnings and message are suprressed, so that's no help. If I understand it correctly, in the last case, all error messages should be avoided. However, that does not help, the function still stops with an error message.
Has someone any idea why this does not work the way I expect it to work? I searched the internet for solutions, but could only find the above mentioned ways.
In the function I am running my simulation, a part of the code is analysed by the external program JAGS (Gibbs sampler) and the error message is produced by this analysis. Might this be where it goes wrong?
Note that I do not have to supress a certain/specific error message, as there are no other error messages produced, it is 'good enough' to have an option that supresses just all error messages.
Thanks for your time and help!
As suggested by the previous solution, you can use try or tryCatch functions, which will encapsulate the error (more info in Advanced R). However, they will not suppress the error reporting message to stderr by default.
This can be achieved by setting their parameters. For try, set silent=TRUE. For tryCatch set error=function(e){}.
Examples:
o <- try(1 + "a")
> Error in 1 + "a" : non-numeric argument to binary operator
o <- try(1 + "a", silent=TRUE) # no error printed
o <- tryCatch(1 + "a")
> Error in 1 + "a" : non-numeric argument to binary operator
o <- tryCatch(1 + "a", error=function(e){})
There is a big difference between suppressing a message and suppressing the response to an error. If a function cannot complete its task, it will of necessity return an error (although some functions have a command-line argument to take some other action in case of error). What you need, as Zoonekynd suggested, is to use try or trycatch to "encapsulate" the error so that your main program flow can continue even when the function fails.
In a nutshell I am trying to parallelise my whole script over dates using Snow and adply but continually get the below error.
Error in unserialize(socklist[[n]]) : error reading from connection
In addition: Warning messages:
1: <anonymous>: ... may be used in an incorrect context: ‘.fun(piece, ...)’
2: <anonymous>: ... may be used in an incorrect context: ‘.fun(piece, ...)’
I have set up the parallelisation process in the following way:
Cores = detectCores(all.tests = FALSE, logical = TRUE)
cl = makeCluster(Cores, type="SOCK")
registerDoSNOW(cl)
clusterExport(cl, c("Var1","Var2","Var3","Var4"), envir = environment())
exposureDaily <- adply(.data = dateSeries,.margins = 1,.fun = MainCalcFunction,
.expand = TRUE, Var1, Var2, Var3,
Var4,.parallel = TRUE)
stopCluster(cl)
Where dateSeries might look something like
> dateSeries
marketDate
1 2016-04-22
2 2016-04-26
MainCalcFunction is a very long script with multiple of my own functions contained within it. As the script is so long reproducing it wouldn't be practical, and a hypothetical small function would defeat the purpose as I have already got this methodology to work with other smaller functions. I can say that within MainCalcFunction I call all my libraries, necessary functions, and a file containing all other variables aside from those exported above so that I don't have to export a long list libraries and other objects.
MainCalcFunction can run successfully in its entirety over 2 dates using adply but not parallelisation, which tells me that it is not a bug in the code that is causing the parallelisation to fail.
Initially I thought (from experience) that the parallelisation over dates was failing because there was another function within the code that utilised parallelisation, however I have subsequently rebuilt the whole code to make sure that there was no such function.
I have poured over the script with a fine tooth comb to see if there was any place where I accidently didn't export something that I needed and I can't find anything.
Some ideas as to what could be causing the code to fail are:
The use of various option valuation functions in fOptions and rquantlib
The use of type sock
I am aware of this question already asked and also this question, and while the first question has helped me, it hasn't yet help solve the problem. (Note: that may be because I haven't used it correctly, having mainly used loginfo("text") to track where the code is. Potentially, there is a way to change that such that I log warning and/or error messages instead?)
Please let me know if there is any other information I can provide to help in solving this. I would be so appreciative if someone could provide some guidance, as the code takes close to 40 minutes to run for a day and I need to run it for close to a year, therefore parallelisation is essential!
EDIT
I have tried to implement the suggestion in the first question included above by utilising the outfile option. Given I am using Windows, I have done this by including the following lines before the exporting of the key objects and running MainCalcFunction :
reportLogName <- paste("logout_parallel.txt", sep="")
addHandler(writeToFile,
file = paste(Save_directory,reportLogName, sep="" ),
level='DEBUG')
with(getLogger(), names(handlers))
loginfo(paste("Starting log file", getwd()))
mc<-detectCores()
cl<-makeCluster(mc, outfile="")
registerDoParallel(cl)
Similarly, at the beginning of MainCalcFunction, after having sourced my libraries and functions I have included the following to print to file:
reportLogName <- paste(testDate,"_logout.txt", sep="")
addHandler(writeToFile,
file = paste(Save_directory,reportLogName, sep="" ),
level='DEBUG')
with(getLogger(), names(handlers))
loginfo(paste("Starting test function ",getwd(), sep = ""))
In the MainCalcFunction function I have then put loginfo("text") statements at key junctures to inform me of where the code is at.
This has resulted in some text files being available after the code fails due to the aforementioned error. However, these text files provide no more information on the cause of the error aside from at what point. This is despite having a tryCatch statement embedded in MainCalcFunction where at the end, on any instance of error I have added the line logerror(e)
I am posting this answer in case it helps anyone else with a similar problem in the future.
Essentially, the error unserialize(socklist[[n]]) doesn't tell you a lot, so to solve it it's a matter of narrowing down the issue.
Firstly, be absolutely sure the code runs over several dates in non-parallel with no errors
Ensure the parallelisation is set up correctly. There are some obvious initial errors that many other questions respond to, e.g., hidden parallelisation inside the code which means parallelisation is occurring twice.
Once you are sure that there is no problem with the code and the parallelisation is set up correctly start narrowing down. The issue is likely (unless something has been missed above) something in the code which isn't a problem when it is run in serial, but becomes a problem when run in parallel. The easiest way to narrow down is by setting outfile = "Log.txt" in which make cluster function you use, e.g., cl<-makeCluster(cores-1, outfile="Log.txt"). Then add as many print("Point in code") comments in your function to narrow down on where the issue is occurring.
In my case, the problem was the line jj = closeAllConnections(). This line works fine in non-parallel but breaks the code when in parallel. I suspect it has something to do with the function closing all connections including socket connections that are required for the parallelisation.
Try running using plain R instead of running in RStudio.
I get an error when using an R function that I wrote:
Warning messages:
1: glm.fit: algorithm did not converge
2: glm.fit: algorithm did not converge
What I have done:
Step through the function
Adding print to find out at what line the error occurs suggests two functions that should not use glm.fit. They are window() and save().
My general approaches include adding print and stop commands, and stepping through a function line by line until I can locate the exception.
However, it is not clear to me using those techniques where this error comes from in the code. I am not even certain which functions within the code depend on glm.fit. How do I go about diagnosing this problem?
I'd say that debugging is an art form, so there's no clear silver bullet. There are good strategies for debugging in any language, and they apply here too (e.g. read this nice article). For instance, the first thing is to reproduce the problem...if you can't do that, then you need to get more information (e.g. with logging). Once you can reproduce it, you need to reduce it down to the source.
Rather than a "trick", I would say that I have a favorite debugging routine:
When an error occurs, the first thing that I usually do is look at the stack trace by calling traceback(): that shows you where the error occurred, which is especially useful if you have several nested functions.
Next I will set options(error=recover); this immediately switches into browser mode where the error occurs, so you can browse the workspace from there.
If I still don't have enough information, I usually use the debug() function and step through the script line by line.
The best new trick in R 2.10 (when working with script files) is to use the findLineNum() and setBreakpoint() functions.
As a final comment: depending upon the error, it is also very helpful to set try() or tryCatch() statements around external function calls (especially when dealing with S4 classes). That will sometimes provide even more information, and it also gives you more control over how errors are handled at run time.
These related questions have a lot of suggestions:
Debugging tools for the R language
Debugging lapply/sapply calls
Getting the state of variables after an error occurs in R
R script line numbers at error?
The best walkthrough I've seen so far is:
http://www.biostat.jhsph.edu/%7Erpeng/docs/R-debug-tools.pdf
Anybody agree/disagree?
As was pointed out to me in another question, Rprof() and summaryRprof() are nice tools to find slow parts of your program that might benefit from speeding up or moving to a C/C++ implementation. This probably applies more if you're doing simulation work or other compute- or data-intensive activities. The profr package can help visualizing the results.
I'm on a bit of a learn-about-debugging kick, so another suggestion from another thread:
Set options(warn=2) to treat warnings like errors
You can also use options to drop you right into the heat of the action when an error or warning occurs, using your favorite debugging function of choice. For instance:
Set options(error=recover) to run recover() when an error occurs, as Shane noted (and as is documented in the R debugging guide. Or any other handy function you would find useful to have run.
And another two methods from one of #Shane's links:
Wrap an inner function call with try() to return more information on it.
For *apply functions, use .inform=TRUE (from the plyr package) as an option to the apply command
#JoshuaUlrich also pointed out a neat way of using the conditional abilities of the classic browser() command to turn on/off debugging:
Put inside the function you might want to debug browser(expr=isTRUE(getOption("myDebug")))
And set the global option by options(myDebug=TRUE)
You could even wrap the browser call: myBrowse <- browser(expr=isTRUE(getOption("myDebug"))) and then call with myBrowse() since it uses globals.
Then there are the new functions available in R 2.10:
findLineNum() takes a source file name and line number and returns the function and environment. This seems to be helpful when you source() a .R file and it returns an error at line #n, but you need to know what function is located at line #n.
setBreakpoint() takes a source file name and line number and sets a breakpoint there
The codetools package, and particularly its checkUsage function can be particularly helpful in quickly picking up syntax and stylistic errors that a compiler would typically report (unused locals, undefined global functions and variables, partial argument matching, and so forth).
setBreakpoint() is a more user-friendly front-end to trace(). Details on the internals of how this works are available in a recent R Journal article.
If you are trying to debug someone else's package, once you have located the problem you can over-write their functions with fixInNamespace and assignInNamespace, but do not use this in production code.
None of this should preclude the tried-and-true standard R debugging tools, some of which are above and others of which are not. In particular, the post-mortem debugging tools are handy when you have a time-consuming bunch of code that you'd rather not re-run.
Finally, for tricky problems which don't seem to throw an error message, you can use options(error=dump.frames) as detailed in this question:
Error without an error being thrown
At some point, glm.fit is being called. That means one of the functions you call or one of the functions called by those functions is using either glm, glm.fit.
Also, as I mention in my comment above, that is a warning not an error, which makes a big difference. You can't trigger any of R's debugging tools from a warning (with default options before someone tells me I am wrong ;-).
If we change the options to turn warnings into errors then we can start to use R's debugging tools. From ?options we have:
‘warn’: sets the handling of warning messages. If ‘warn’ is
negative all warnings are ignored. If ‘warn’ is zero (the
default) warnings are stored until the top-level function
returns. If fewer than 10 warnings were signalled they will
be printed otherwise a message saying how many (max 50) were
signalled. An object called ‘last.warning’ is created and
can be printed through the function ‘warnings’. If ‘warn’ is
one, warnings are printed as they occur. If ‘warn’ is two or
larger all warnings are turned into errors.
So if you run
options(warn = 2)
then run your code, R will throw an error. At which point, you could run
traceback()
to see the call stack. Here is an example.
> options(warn = 2)
> foo <- function(x) bar(x + 2)
> bar <- function(y) warning("don't want to use 'y'!")
> foo(1)
Error in bar(x + 2) : (converted from warning) don't want to use 'y'!
> traceback()
7: doWithOneRestart(return(expr), restart)
6: withOneRestart(expr, restarts[[1L]])
5: withRestarts({
.Internal(.signalCondition(simpleWarning(msg, call), msg,
call))
.Internal(.dfltWarn(msg, call))
}, muffleWarning = function() NULL)
4: .signalSimpleWarning("don't want to use 'y'!", quote(bar(x +
2)))
3: warning("don't want to use 'y'!")
2: bar(x + 2)
1: foo(1)
Here you can ignore the frames marked 4: and higher. We see that foo called bar and that bar generated the warning. That should show you which functions were calling glm.fit.
If you now want to debug this, we can turn to another option to tell R to enter the debugger when it encounters an error, and as we have made warnings errors we will get a debugger when the original warning is triggered. For that you should run:
options(error = recover)
Here is an example:
> options(error = recover)
> foo(1)
Error in bar(x + 2) : (converted from warning) don't want to use 'y'!
Enter a frame number, or 0 to exit
1: foo(1)
2: bar(x + 2)
3: warning("don't want to use 'y'!")
4: .signalSimpleWarning("don't want to use 'y'!", quote(bar(x + 2)))
5: withRestarts({
6: withOneRestart(expr, restarts[[1]])
7: doWithOneRestart(return(expr), restart)
Selection:
You can then step into any of those frames to see what was happening when the warning was thrown.
To reset the above options to their default, enter
options(error = NULL, warn = 0)
As for the specific warning you quote, it is highly likely that you need to allow more iterations in the code. Once you've found out what is calling glm.fit, work out how to pass it the control argument using glm.control - see ?glm.control.
So browser(), traceback() and debug() walk into a bar, but trace() waits outside and keeps the motor running.
By inserting browser somewhere in your function, the execution will halt and wait for your input. You can move forward using n (or Enter), run the entire chunk (iteration) with c, finish the current loop/function with f, or quit with Q; see ?browser.
With debug, you get the same effect as with browser, but this stops the execution of a function at its beginning. Same shortcuts apply. This function will be in a "debug" mode until you turn it off using undebug (that is, after debug(foo), running the function foo will enter "debug" mode every time until you run undebug(foo)).
A more transient alternative is debugonce, which will remove the "debug" mode from the function after the next time it's evaluated.
traceback will give you the flow of execution of functions all the way up to where something went wrong (an actual error).
You can insert code bits (i.e. custom functions) in functions using trace, for example browser. This is useful for functions from packages and you're too lazy to get the nicely folded source code.
My general strategy looks like:
Run traceback() to see look for obvious issues
Set options(warn=2) to treat warnings like errors
Set options(error=recover) to step into the call stack on error
After going through all the steps suggested here I just learned that setting .verbose = TRUE in foreach() also gives me tons of useful information. In particular foreach(.verbose=TRUE) shows exactly where an error occurs inside the foreach loop, while traceback() does not look inside the foreach loop.
Mark Bravington's debugger which is available as the package debug on CRAN is very good and pretty straight forward.
library(debug);
mtrace(myfunction);
myfunction(a,b);
#... debugging, can query objects, step, skip, run, breakpoints etc..
qqq(); # quit the debugger only
mtrace.off(); # turn off debugging
The code pops up in a highlighted Tk window so you can see what's going on and, of course you can call another mtrace() while in a different function.
HTH
I like Gavin's answer: I did not know about options(error = recover). I also like to use the 'debug' package that gives a visual way to step through your code.
require(debug)
mtrace(foo)
foo(1)
At this point it opens up a separate debug window showing your function, with a yellow line showing where you are in the code. In the main window the code enters debug mode, and you can keep hitting enter to step through the code (and there are other commands as well), and examine variable values, etc. The yellow line in the debug window keeps moving to show where you are in the code. When done with debugging, you can turn off tracing with:
mtrace.off()
Based on the answer I received here, you should definitely check out the options(error=recover) setting. When this is set, upon encountering an error, you'll see text on the console similar to the following (traceback output):
> source(<my filename>)
Error in plot.window(...) : need finite 'xlim' values
In addition: Warning messages:
1: In xy.coords(x, y, xlabel, ylabel, log) : NAs introduced by coercion
2: In min(x) : no non-missing arguments to min; returning Inf
3: In max(x) : no non-missing arguments to max; returning -Inf
Enter a frame number, or 0 to exit
1: source(<my filename>)
2: eval.with.vis(ei, envir)
3: eval.with.vis(expr, envir, enclos)
4: LinearParamSearch(data = dataset, y = data.frame(LGD = dataset$LGD10), data.names = data
5: LinearParamSearch.R#66: plot(x = x, y = y.data, xlab = names(y), ylab = data.names[i])
6: LinearParamSearch.R#66: plot.default(x = x, y = y.data, xlab = names(y), ylab = data.nam
7: LinearParamSearch.R#66: localWindow(xlim, ylim, log, asp, ...)
8: LinearParamSearch.R#66: plot.window(...)
Selection:
At which point you can choose which "frame" to enter. When you make a selection, you'll be placed into browser() mode:
Selection: 4
Called from: stop(gettextf("replacement has %d rows, data has %d", N, n),
domain = NA)
Browse[1]>
And you can examine the environment as it was at the time of the error. When you're done, type c to bring you back to the frame selection menu. When you're done, as it tells you, type 0 to exit.
I gave this answer to a more recent question, but am adding it here for completeness.
Personally I tend not to use functions to debug. I often find that this causes as much trouble as it solves. Also, coming from a Matlab background I like being able to do this in an integrated development environment (IDE) rather than doing this in the code. Using an IDE keeps your code clean and simple.
For R, I use an IDE called "RStudio" (http://www.rstudio.com), which is available for windows, mac, and linux and is pretty easy to use.
Versions of Rstudio since about October 2013 (0.98ish?) have the capability to add breakpoints in scripts and functions: to do this, just click on the left margin of the file to add a breakpoint. You can set a breakpoint and then step through from that point on. You also have access to all of the data in that environment, so you can try out commands.
See http://www.rstudio.com/ide/docs/debugging/overview for details. If you already have Rstudio installed, you may need to upgrade - this is a relatively new (late 2013) feature.
You may also find other IDEs that have similar functionality.
Admittedly, if it's a built-in function you may have to resort to some of the suggestions made by other people in this discussion. But, if it's your own code that needs fixing, an IDE-based solution might be just what you need.
To debug Reference Class methods without instance reference
ClassName$trace(methodName, browser)
I am beginning to think that not printing error line number - a most basic requirement - BY DEFAILT- is some kind of a joke in R/Rstudio. The only reliable method I have found to find where an error occurred is to make the additional effort of calloing traceback() and see the top line.
I get an error when using an R function that I wrote:
Warning messages:
1: glm.fit: algorithm did not converge
2: glm.fit: algorithm did not converge
What I have done:
Step through the function
Adding print to find out at what line the error occurs suggests two functions that should not use glm.fit. They are window() and save().
My general approaches include adding print and stop commands, and stepping through a function line by line until I can locate the exception.
However, it is not clear to me using those techniques where this error comes from in the code. I am not even certain which functions within the code depend on glm.fit. How do I go about diagnosing this problem?
I'd say that debugging is an art form, so there's no clear silver bullet. There are good strategies for debugging in any language, and they apply here too (e.g. read this nice article). For instance, the first thing is to reproduce the problem...if you can't do that, then you need to get more information (e.g. with logging). Once you can reproduce it, you need to reduce it down to the source.
Rather than a "trick", I would say that I have a favorite debugging routine:
When an error occurs, the first thing that I usually do is look at the stack trace by calling traceback(): that shows you where the error occurred, which is especially useful if you have several nested functions.
Next I will set options(error=recover); this immediately switches into browser mode where the error occurs, so you can browse the workspace from there.
If I still don't have enough information, I usually use the debug() function and step through the script line by line.
The best new trick in R 2.10 (when working with script files) is to use the findLineNum() and setBreakpoint() functions.
As a final comment: depending upon the error, it is also very helpful to set try() or tryCatch() statements around external function calls (especially when dealing with S4 classes). That will sometimes provide even more information, and it also gives you more control over how errors are handled at run time.
These related questions have a lot of suggestions:
Debugging tools for the R language
Debugging lapply/sapply calls
Getting the state of variables after an error occurs in R
R script line numbers at error?
The best walkthrough I've seen so far is:
http://www.biostat.jhsph.edu/%7Erpeng/docs/R-debug-tools.pdf
Anybody agree/disagree?
As was pointed out to me in another question, Rprof() and summaryRprof() are nice tools to find slow parts of your program that might benefit from speeding up or moving to a C/C++ implementation. This probably applies more if you're doing simulation work or other compute- or data-intensive activities. The profr package can help visualizing the results.
I'm on a bit of a learn-about-debugging kick, so another suggestion from another thread:
Set options(warn=2) to treat warnings like errors
You can also use options to drop you right into the heat of the action when an error or warning occurs, using your favorite debugging function of choice. For instance:
Set options(error=recover) to run recover() when an error occurs, as Shane noted (and as is documented in the R debugging guide. Or any other handy function you would find useful to have run.
And another two methods from one of #Shane's links:
Wrap an inner function call with try() to return more information on it.
For *apply functions, use .inform=TRUE (from the plyr package) as an option to the apply command
#JoshuaUlrich also pointed out a neat way of using the conditional abilities of the classic browser() command to turn on/off debugging:
Put inside the function you might want to debug browser(expr=isTRUE(getOption("myDebug")))
And set the global option by options(myDebug=TRUE)
You could even wrap the browser call: myBrowse <- browser(expr=isTRUE(getOption("myDebug"))) and then call with myBrowse() since it uses globals.
Then there are the new functions available in R 2.10:
findLineNum() takes a source file name and line number and returns the function and environment. This seems to be helpful when you source() a .R file and it returns an error at line #n, but you need to know what function is located at line #n.
setBreakpoint() takes a source file name and line number and sets a breakpoint there
The codetools package, and particularly its checkUsage function can be particularly helpful in quickly picking up syntax and stylistic errors that a compiler would typically report (unused locals, undefined global functions and variables, partial argument matching, and so forth).
setBreakpoint() is a more user-friendly front-end to trace(). Details on the internals of how this works are available in a recent R Journal article.
If you are trying to debug someone else's package, once you have located the problem you can over-write their functions with fixInNamespace and assignInNamespace, but do not use this in production code.
None of this should preclude the tried-and-true standard R debugging tools, some of which are above and others of which are not. In particular, the post-mortem debugging tools are handy when you have a time-consuming bunch of code that you'd rather not re-run.
Finally, for tricky problems which don't seem to throw an error message, you can use options(error=dump.frames) as detailed in this question:
Error without an error being thrown
At some point, glm.fit is being called. That means one of the functions you call or one of the functions called by those functions is using either glm, glm.fit.
Also, as I mention in my comment above, that is a warning not an error, which makes a big difference. You can't trigger any of R's debugging tools from a warning (with default options before someone tells me I am wrong ;-).
If we change the options to turn warnings into errors then we can start to use R's debugging tools. From ?options we have:
‘warn’: sets the handling of warning messages. If ‘warn’ is
negative all warnings are ignored. If ‘warn’ is zero (the
default) warnings are stored until the top-level function
returns. If fewer than 10 warnings were signalled they will
be printed otherwise a message saying how many (max 50) were
signalled. An object called ‘last.warning’ is created and
can be printed through the function ‘warnings’. If ‘warn’ is
one, warnings are printed as they occur. If ‘warn’ is two or
larger all warnings are turned into errors.
So if you run
options(warn = 2)
then run your code, R will throw an error. At which point, you could run
traceback()
to see the call stack. Here is an example.
> options(warn = 2)
> foo <- function(x) bar(x + 2)
> bar <- function(y) warning("don't want to use 'y'!")
> foo(1)
Error in bar(x + 2) : (converted from warning) don't want to use 'y'!
> traceback()
7: doWithOneRestart(return(expr), restart)
6: withOneRestart(expr, restarts[[1L]])
5: withRestarts({
.Internal(.signalCondition(simpleWarning(msg, call), msg,
call))
.Internal(.dfltWarn(msg, call))
}, muffleWarning = function() NULL)
4: .signalSimpleWarning("don't want to use 'y'!", quote(bar(x +
2)))
3: warning("don't want to use 'y'!")
2: bar(x + 2)
1: foo(1)
Here you can ignore the frames marked 4: and higher. We see that foo called bar and that bar generated the warning. That should show you which functions were calling glm.fit.
If you now want to debug this, we can turn to another option to tell R to enter the debugger when it encounters an error, and as we have made warnings errors we will get a debugger when the original warning is triggered. For that you should run:
options(error = recover)
Here is an example:
> options(error = recover)
> foo(1)
Error in bar(x + 2) : (converted from warning) don't want to use 'y'!
Enter a frame number, or 0 to exit
1: foo(1)
2: bar(x + 2)
3: warning("don't want to use 'y'!")
4: .signalSimpleWarning("don't want to use 'y'!", quote(bar(x + 2)))
5: withRestarts({
6: withOneRestart(expr, restarts[[1]])
7: doWithOneRestart(return(expr), restart)
Selection:
You can then step into any of those frames to see what was happening when the warning was thrown.
To reset the above options to their default, enter
options(error = NULL, warn = 0)
As for the specific warning you quote, it is highly likely that you need to allow more iterations in the code. Once you've found out what is calling glm.fit, work out how to pass it the control argument using glm.control - see ?glm.control.
So browser(), traceback() and debug() walk into a bar, but trace() waits outside and keeps the motor running.
By inserting browser somewhere in your function, the execution will halt and wait for your input. You can move forward using n (or Enter), run the entire chunk (iteration) with c, finish the current loop/function with f, or quit with Q; see ?browser.
With debug, you get the same effect as with browser, but this stops the execution of a function at its beginning. Same shortcuts apply. This function will be in a "debug" mode until you turn it off using undebug (that is, after debug(foo), running the function foo will enter "debug" mode every time until you run undebug(foo)).
A more transient alternative is debugonce, which will remove the "debug" mode from the function after the next time it's evaluated.
traceback will give you the flow of execution of functions all the way up to where something went wrong (an actual error).
You can insert code bits (i.e. custom functions) in functions using trace, for example browser. This is useful for functions from packages and you're too lazy to get the nicely folded source code.
My general strategy looks like:
Run traceback() to see look for obvious issues
Set options(warn=2) to treat warnings like errors
Set options(error=recover) to step into the call stack on error
After going through all the steps suggested here I just learned that setting .verbose = TRUE in foreach() also gives me tons of useful information. In particular foreach(.verbose=TRUE) shows exactly where an error occurs inside the foreach loop, while traceback() does not look inside the foreach loop.
Mark Bravington's debugger which is available as the package debug on CRAN is very good and pretty straight forward.
library(debug);
mtrace(myfunction);
myfunction(a,b);
#... debugging, can query objects, step, skip, run, breakpoints etc..
qqq(); # quit the debugger only
mtrace.off(); # turn off debugging
The code pops up in a highlighted Tk window so you can see what's going on and, of course you can call another mtrace() while in a different function.
HTH
I like Gavin's answer: I did not know about options(error = recover). I also like to use the 'debug' package that gives a visual way to step through your code.
require(debug)
mtrace(foo)
foo(1)
At this point it opens up a separate debug window showing your function, with a yellow line showing where you are in the code. In the main window the code enters debug mode, and you can keep hitting enter to step through the code (and there are other commands as well), and examine variable values, etc. The yellow line in the debug window keeps moving to show where you are in the code. When done with debugging, you can turn off tracing with:
mtrace.off()
Based on the answer I received here, you should definitely check out the options(error=recover) setting. When this is set, upon encountering an error, you'll see text on the console similar to the following (traceback output):
> source(<my filename>)
Error in plot.window(...) : need finite 'xlim' values
In addition: Warning messages:
1: In xy.coords(x, y, xlabel, ylabel, log) : NAs introduced by coercion
2: In min(x) : no non-missing arguments to min; returning Inf
3: In max(x) : no non-missing arguments to max; returning -Inf
Enter a frame number, or 0 to exit
1: source(<my filename>)
2: eval.with.vis(ei, envir)
3: eval.with.vis(expr, envir, enclos)
4: LinearParamSearch(data = dataset, y = data.frame(LGD = dataset$LGD10), data.names = data
5: LinearParamSearch.R#66: plot(x = x, y = y.data, xlab = names(y), ylab = data.names[i])
6: LinearParamSearch.R#66: plot.default(x = x, y = y.data, xlab = names(y), ylab = data.nam
7: LinearParamSearch.R#66: localWindow(xlim, ylim, log, asp, ...)
8: LinearParamSearch.R#66: plot.window(...)
Selection:
At which point you can choose which "frame" to enter. When you make a selection, you'll be placed into browser() mode:
Selection: 4
Called from: stop(gettextf("replacement has %d rows, data has %d", N, n),
domain = NA)
Browse[1]>
And you can examine the environment as it was at the time of the error. When you're done, type c to bring you back to the frame selection menu. When you're done, as it tells you, type 0 to exit.
I gave this answer to a more recent question, but am adding it here for completeness.
Personally I tend not to use functions to debug. I often find that this causes as much trouble as it solves. Also, coming from a Matlab background I like being able to do this in an integrated development environment (IDE) rather than doing this in the code. Using an IDE keeps your code clean and simple.
For R, I use an IDE called "RStudio" (http://www.rstudio.com), which is available for windows, mac, and linux and is pretty easy to use.
Versions of Rstudio since about October 2013 (0.98ish?) have the capability to add breakpoints in scripts and functions: to do this, just click on the left margin of the file to add a breakpoint. You can set a breakpoint and then step through from that point on. You also have access to all of the data in that environment, so you can try out commands.
See http://www.rstudio.com/ide/docs/debugging/overview for details. If you already have Rstudio installed, you may need to upgrade - this is a relatively new (late 2013) feature.
You may also find other IDEs that have similar functionality.
Admittedly, if it's a built-in function you may have to resort to some of the suggestions made by other people in this discussion. But, if it's your own code that needs fixing, an IDE-based solution might be just what you need.
To debug Reference Class methods without instance reference
ClassName$trace(methodName, browser)
I am beginning to think that not printing error line number - a most basic requirement - BY DEFAILT- is some kind of a joke in R/Rstudio. The only reliable method I have found to find where an error occurred is to make the additional effort of calloing traceback() and see the top line.
I'm facing a strange issue in R.
Consider the following code (a really simplified version of the real code but still having the problem) :
library(timeSeries)
tryCatch(
{
specificWeekDay <- 2
currTs <- timeSeries(c(1,2),c('2012-01-01','2012-01-02'),
format='%Y-%m-%d',units='A')
# just 2 dates out of range
start <- time(currTs)[2]+100*24*3600
end <- time(currTs)[2]+110*24*3600
# this line returns an empty timeSeries
currTs <- window(currTs,start=start,end=end)
message("Up to now, everything is OK")
# this is the line with the uncatchable error
currTs[!(as.POSIXlt(time(currTs))$wday %in% specificWeekDay),] <- NA
message("I'm after the bugged line !")
},error=function(e){message(e)})
message("End")
When I run that code in RGui, I correctly get the following output:
Up to now, everything is OK
error in evaluating the argument 'i' in
selecting a method for function '[<-': Error in
as.POSIXlt.numeric(time(currTs)) : 'origin' must be supplied
End
Instead, when I run it through RScript (in windows) using the following line:
RScript.exe --vanilla "myscript.R"
I get this output:
Up to now, everything is OK
Execution interrupted
It seems like RScript crashes...
Any idea about the reason?
Is this a timeSeries package bug, or I'm doing something wrong ?
If the latter, what's the right way to be sure to catch all the errors ?
Thanks in advance.
EDIT :
Here's a smaller example reproducing the issue that doesn't use timeSeries package. To test it, just run it as described above:
library(methods)
# define a generic function
setGeneric("foo",
function(x, ...){standardGeneric("foo")})
# set a method for the generic function
setMethod("foo", signature("character"),
function(x) {x})
tryCatch(
{
foo("abc")
foo(notExisting)
},error=function(e)print(e))
It seems something related to generic method dispatching; when an argument of a method causes an error, the dispatcher cannot find the signature of the method and conseguently raises an exception that tryCatch function seems unable to handle when run through RScript.
Strangely, it doesn't happen for example with print(notExisting); in that case the exception is correctly handled.
Any idea about the reason and how to catch this kind of errors ?
Note:
I'm using R-2.14.2 on Windows 7
The issue is in the way the internal C code implementing S4 method dispatch tries to catch and handle some errors and how the non-interactive case is treated in this approach. A work-around should be in place in R-devel and R-patched soon.
Work-around now committed to R-devel and R-patched.
Information about tryCatch() [that the OP already knew and used but I didn't notice]
I think you are missing that your tryCatch() is not doing anything special with the error, hence you are raising an error in the normal fashion. In interactive use the error is thrown and handled in the usual fashion, but an error inside a script run in a non-interactive session (a la Rscript) will abort the running script.
tryCatch() is a complex function that allows the potential to trap and handle all sorts of events in R, not just errors. However by default it is set up to mimic the standard R error handling procedure; basically allow the error to be thrown and reported by R. If you want R to do anything other than the basic behaviour then you need to add a specific handler for the error:
> e <- simpleError("test error")
> tryCatch(foo, error = function(e) e,
+ finally = writeLines("There was a problem!"))
There was a problem!
<simpleError in doTryCatch(return(expr), name, parentenv, handler): object 'foo'
not found>
I suggest you read ?tryCatch in more detail to understand better what it does.
An alternative is to use try(). To modify your script I would just do:
# this is the line with the uncatchable error
tried <- try(currTs[!(as.POSIXlt(time(currTs))$wday %in% specificWeekDay),] <- NA,
silent = TRUE)
if(inherits(tried, "try-error")) {
writeLines("There was an error!")
} else {
writeLines("Everything worked fine!")
}
The key bit is to save the object returned from try() so you can test the class, and to have try() operate silently. Consider the difference:
> bar <- try(foo)
Error in try(foo) : object 'foo' not found
> bar <- try(foo, silent = TRUE)
> class(bar)
[1] "try-error"
Note that in the first call above, the error is caught and reported as a message. In the second, it is not reported. In both cases an object of class "try-error" is returned.
Internally, try() is written as a single call to tryCatch() which sets up a custom function for the error handler which reports the error as a message and sets up the returned object. You might wish to study the R code for try() as another example of using tryCatch().