I have data spread over a period of two months. When I graph data points for each day, dates (dd/mm/yyyy) are overlapping and it is not possible to make sense of which date a certain point refers to. I tried to remove years from the date as they are not useful for the info I have and the dd/mm should leave enough space.
df$date<-as.Date(df$date, format="%d/%m")
However, it transforms the 01/09/2014 to 2015-09-01. I read that when the year is missing as.Date assumes current year and inputs it. Can I avoid this automatic insertion somehow?
something like this?
date <- as.Date("01/09/2014", format = %d/%m/%Y)
format(date, "%d/%m")
"01/09"
Related
Apologies for a question on something which is probably very straightforward. I am very new to R.
I have a dataframe which contains dates in a year,month,day format e.g. "2020-05-28". I wanted to stratify the data at month level, so I used the "floor_date" function. However, now the dates read as "2020-05-01" etc. This is absolutely fine for the data set itself, but I am creating epidemiological curves and want to change the dates to "2020-05" etc. on the legend. Could anyone provide some guidance on how to do this? I can't simply replace the pattern "01" with a blank as I need to keep 01 on month level (January) visible.
My data contains several measurements in one day. It is stored in CSV-file and looks like this:
enter image description here
The V1 column is factor type, so I'm adding a extra column which is date-time -type: vd$Vdate <- as_datetime(vd$V1) :
enter image description here
Then I'm trying to convert the vd-data into time series: vd.ts<- ts(vd, frequency = 365)
But then the dates are gone:
enter image description here
I just cannot get it what I am doing wrong! Could someone help me, please.
Your dates are gone because you need to build the ts dataframe from your variables (V1, ... V7) disregarding the date field and your ts command will order R to structure the dates.
Also, I noticed that you have what is seems like hourly data, so you need to provide the frequency that is appropriate to your time not 365. Considering what you posted your frequency seems to be a bit odd. I recommend finding a way to establish the frequency correctly. For example, if I have hourly data for 365 days of the year then I have a frequency of 365.25*24 (0.25 for the leap years).
So the following is just as an example, it still won't work properly with what I see (it is limited view of your dataset so I am not sure 100%)
# Build ts data (univariate)
vs.ts <- ts(vd$V1, frequency = 365, start = c(2019, 4)
# check to see if it is structured correctly
print(vd.ts, calendar = T)
Finally my time series is working properly. I used
ts <- zoo(measurements, date_times)
and I found out that the date_times was supposed to be converted with as_datetime() as otherwise they were character type. The measurements are converted into data.frame type.
I've been trying to do a time series on my dataframe, and I need to strip times from my csv. This is what I've got:
campbell <-read.csv("campbell.csv")
campbell$date = strptime(campbell$date, "%m/%d")
campbell.ts <- xts(campbell[,-1],order.by=campbell[,1])
First, what I'm trying to do is just get xts to strip the dates as "xx/xx" meaning just the month and day. I have no year for my data. When I try that second line of code and call upon the date column, it converts it to "2013-xx-xx." These months and days have no year associated with them, and I can't figure out how to get rid of the 2013. (The csv file I'm calling on has the dates in the format "9/30,10/1...etc.)
Secondly, once I try and make a time series (the third line), I am unsure what the "order.by" command is calling on. What am I indexing?
Any help??
Thanks!
For strptime, you need to provide the full date, i.e. day, month and year. In case, any of these is not provided, current ones are assumed from the system's time and appended to the incomplete date. So, if you want to retain your date format as you have read it, first make a copy of that and store in a temporary variable and then use strptime over campbell$date to convert into R readable date format. Since, year is not a concern to you, you need not bother about it even though it is automatically appended by strptime.
campbell <-read.csv("campbell.csv")
date <- campbell$date
campbell$date <- strptime(campbell$date, "%m/%d")
Secondly, what you are doing by 'the third line' (xts(campbell[,-1],order.by=campbell[,1])) command is that, your are telling to order all the data of campbell except the first column (campbell[,-1]) according to the index provided by the time data in the first column of campbell (campbell[,1]). So, it would only work given the date is in the first column.
After ordering the data according to time-series, you can replace back the campbell$date column with date to get back the date format you wanted (although here, first you have to order date also like shown below)
date <- xts(date, order.by=campbell[,1]) # assuming campbell$date is campbell[,1]
campbell.ts <- xts(campbell[,-1], order.by=campbell[,1])
campbell.ts <- cbind(date, campbell.ts)
format(as.Date(campbell$dat, "%m/%d/%Y"), "%m/%d")
I want to create a single column with a sequence of date/time increasing every hour for one year or one month (for example). I was using a code like this to generate this sequence:
start.date<-"2012-01-15"
start.time<-"00:00:00"
interval<-60 # 60 minutes
increment.mins<-interval*60
x<-paste(start.date,start.time)
for(i in 1:365){
print(strptime(x, "%Y-%m-%d %H:%M:%S")+i*increment.mins)
}
However, I am not sure how to specify the range of the sequence of dates and hours. Also, I have been having problems dealing with the first hour "00:00:00"? Not sure what is the best way to specify the length of the date/time sequence for a month, year, etc? Any suggestion will be appreciated.
I would strongly recommend you to use the POSIXct datatype. This way you can use seq without any problems and use those data however you want.
start <- as.POSIXct("2012-01-15")
interval <- 60
end <- start + as.difftime(1, units="days")
seq(from=start, by=interval*60, to=end)
Now you can do whatever you want with your vector of timestamps.
Try this. mondate is very clever about advancing by a month. For example, it will advance the last day of Jan to last day of Feb whereas other date/time classes tend to overshoot into Mar. chron does not use time zones so you can't get the time zone bugs that code as you can using POSIXct. Here x is from the question.
library(chron)
library(mondate)
start.time.num <- as.numeric(as.chron(x))
# +1 means one month. Use +12 if you want one year.
end.time.num <- as.numeric(as.chron(paste(mondate(x)+1, start.time)))
# 1/24 means one hour. Change as needed.
hours <- as.chron(seq(start.time.num, end.time.num, 1/24))
I have a time series dataset for several meteorological variables. The time data is logged in three separate columns:
Year (e.g. 2012)
Day of year (e.g. 261 representing 17-September in a Leap Year)
Hrs:Mins (e.g. 1610)
Is there a way I can merge the three columns to create a single timestamp in R? I'm not very familiar with how R deals with the Day of Year variable.
Thanks for any help with this!
It looks like the timeDate package can handle gregorian time frames. I haven't used it personally but it looks straightforward. There is a shift argument in some methods that allow you to set the offset from your data.
http://cran.r-project.org/web/packages/timeDate/timeDate.pdf
Because you mentioned it, I thought I'd show the actual code to merge together separate columns. When you have the values you need in separate columns you can use paste to bring them together and lubridate::mdy to parse them.
library(lubridate)
col.month <- "Jan"
col.year <- "2012"
col.day <- "23"
date <- mdy(paste(col.month, col.day, col.year, sep = "-"))
Lubridate is a great package, here's the official page: https://github.com/hadley/lubridate
And here is a nice set of examples: http://www.r-statistics.com/2012/03/do-more-with-dates-and-times-in-r-with-lubridate-1-1-0/
You should get quite far using ISOdatetime. This function takes vectors of year, day, hour, and minute as input and outputs an POSIXct object which represents time. You just have to split the third column into two separate hour minute columns and you can use the function.