I'm not sure I'm using right terminology here.
Basically I want to update entire "id" column using count(*) [485] as a delimiter, in an ascending order, so the resulting row value will correspond with rownumber (not the rowid).
If I understand you correctly, this should work for you:
UPDATE tbl_name SET id=rowid
EDIT
If that's is the case -> then it's a lit bit more tricky, since SQlite doesn't support variables declaration.
So what I suggest is,
To create temporary table from select of your original table which makes it's rowids to be as row numbers 1,2,3 etc...
Set it's rowNum (the needed row number column) as each rowid
Then replace the original table with it.
Like this: (assume original table called orig_name)
CREATE TABLE tmp_tbl AS SELECT rowNum FROM orig_name;
UPDATE tmp_tbl SET rowNum=rowid;
DROP TABLE orig_name;
CREATE TABLE orig_name AS SELECT rowNum FROM tmp_tbl;
DROP TABLE tmp_tbl;
Try this: http://www.sqlite.org/lang_createtable.html#rowid
You can use some inner database variables such as rowid, oid etc to get what you need.
[edit]
Think I just understood what you meant, you want for each insert action, add a value that is the total count of rows currently in the table?
If so, try something like this:
UPDATE tbl_name
SET id = (select count(*) from tbl_name)
WHERE yada_yada_yada
Related
When I am copying rows from one table to another, there is a convenient syntax:
INSERT INTO table1 SELECT * FROM table2 WHERE <table 2 rows have some property>
But what if I want to overwrite entire existing rows in table1 with entire rows from table2? So I want something like:
UPDATE table1 SET * FROM table2 WHERE <table 1 and 2 rows match on some key field>
But from what I can tell, the only way to do this is to enumerate the columns being set one by one (set table1.columnA = table2.columnA, table1.columnB = table2.columnB, and so on). Is there some way to say "do it for all the columns" when using UPDATE like there is when using INSERT? If not, why not?
(I guess I could delete all rows from table1 with the given property, and then use the INSERT INTO table1 SELECT * syntax to bring in the replacement rows from table2. But that seems like it leaves a bunch of unwanted deleted rows in the database needing to be vacuumed at some point, as opposed to a clean UPDATE where there are no deleted records? Or maybe I'm not understanding the efficiency of a bunch of deletes followed by a bunch of inserts?)
There is no such syntax for exactly what you have in mind, and I think you will need to SET each column separately. Also, SQLite does not support a direct update join syntax, but we may use correlated subqueries:
UPDATE table1
SET table1.columnA = (SELECT columnA FROM table2 WHERE table1.col = table2.col),
SET table1.columnB = (SELECT columnB FROM table2 WHERE table1.col = table2.col),
SET table1.columnC = (SELECT columnC FROM table2 WHERE table1.col = table2.col);
I want to copy the rows of a table OLD into another table NEW.
INSERT INTO NEW
SELECT date, kind, id, product, version, quantity FROM OLD;
The table OLD has a column kind which is VARCHAR and contains words like insert, extract, delete. In the NEW table this column is an INTEGER. Is there a way to say that if you find delete insert 1, if you find extract insert 2 etc.. ?
This should work for you,
INSERT INTO Destination SELECT * FROM Source;
See SQL As Understood By SQLite: INSERT for a formal definition.
You can use a CASE statement to replace the string labels with integers:
INSERT INTO NEW
SELECT date,
CASE WHEN kind = 'delete' THEN 1
WHEN kind = 'extract' THEN 2
ELSE ...
END,
product,
version,
quantity
FROM OLD;
This assumes that the columns line up correctly, and all the other column types match.
Hope you are doing good. I am new to SQL coding. I want to write a query which finds the difference between two tables and writes updates or new data into third table. My two tables have identical column names. Third table which captures changes have extra column called comment. I would like to insert the comment whether it is a new row or updated row based on the row modification.
**TABLE1 (BACKUP)**
KEY,FIRST_NAME,LAST_NAME,CITY
1,RAM,KUMAR,INDIA
2,TOM,MOODY,ENGLAND
3,MOHAMMAD,HAFEEZ,PAKISTAN
4,MONIKA,SAM,USA
5,MIKE,PALEDINO,USA
**TABLE2 (CURRENT)**
KEY,FIRST_NAME,LAST_NAME,CITY
1,RAM,KUMAR,USA
2,TOM,MOODY,ENGLAND
3,MOHAMMAD,HAFEEZ,PAKISTAN
4,MONIKA,SAM,INDIA
5,MIKE,PALEDINO,USA
6,MAHELA,JAYA,SL
**TABLE3 (DIFFERENCE FROM TABLE2 TO TABLE1)**
KEY,FIRST_NAME,LAST_NAME,CITY,COMMENT
1,RAM,KUMAR,USA,UPDATE
4,MONIKA,SAM,INDIA,UPDATE
6,MAHELA,JAYA,SL,INSERT
Anyone else? I want to update my comments columns whether it is a new insert or update to existing row
#danny117 is correct in the general sense though I think using MINUS is better
SELECT * FROM TABLE2
MINUS
SELECT * FROM TABLE1
You may also like to look at this documentation which explains more about minus, intersect
INSERT INTO TABLE3
SELECT KEY,FIRST_NAME,LAST_NAME,CITY,NULL AS COMMENTS FROM TABLE2
MINUS
SELECT KEY,FIRST_NAME,LAST_NAME,CITY,NULL AS COMMENTS FROM TABLE1;
UPDATE TABLE3
SET COMMENTS =
CASE
WHEN 1=(SELECT 1 FROM TABLE1 WHERE TABLE1.KEY=TABLE3.KEY) THEN 'UPDATED'
ELSE 'INSERTED'
END
Ok I have a sqlite db, that has roughly 100 rows. It is kind of a strange thing that I'm trying to do, but I need to insert a new row between each of the existing rows.
I have been trying to use the Insert statement as follows, but haven't had any luck:
insert into t1(column1) values("hello") where id%2 == 0
So I'm basically trying to use the %-operator to tell me if the id is even or odd. For every even id number, I'd like to insert a new row.
What am I missing? What can I do differently? How can I insert a new row into every other row and have the index updated as well?
Thanks
Your question assumes that the rows have some kind of built-in order to them, and that you can insert rows between other rows. That's not true.
It is true that rows have an order on disk, and that the id column is usually assigned in order, but that's an implementation detail. When you perform a query, the database is free to return the rows in any order it chooses, unless you specify what you want with an ORDER BY clause.
Now, I'm assuming what you really want is to insert rows between the existing rows in id order. One way to get what you want would look like this:
UPDATE t1 SET id = id * 2
INSERT INTO t1 (id, column) SELECT id+1, "hello" FROM t1
The UPDATE would double the ids of all the existing rows (so 1,2,3 becomes 2,4,6); then the INSERT would perform a query on t1 and use the result to insert a new set of rows with id values one more than the existing rows (so 2,4,6 becomes 3,5,7).
I haven't tested the above statements, so I don't know if they would work or if they require some extra trickery (like a temporary table) since we are querying and updating the same table in one statement. Also I may have made a syntax error.
Don't consider the rows as pre-ordered in the database. A database will store them as they come in, or according to an index. It's your task to order them on retrieval (i.e. when you query for data) according to your needs.
Maybe i should do this in C# but i have more then one row with linkId X. I would like to remove it but i am unsure how. In code i could just use a foreach from 0 to n and remove any found rows with a greater (or !=) id but thats in code. Is there a less difficult way of doing it using sqlite?
Assuming the table's name is tableName and there is a primary key field named id, the following sql would do it. I think the following SQL query is general enough and should be able to be executed under any database engine.
delete from tableName
where id not in (
select min(id) from tableName
group by linkId
)