I downloaded Instant Oracle Client Version 11.2.0.4.0(basic, sqlplus, devel .rpm file) by Oracle website in Ubuntu.
After converting .rpm into .deb using alien, I installed it, basic first and sqlplus and last devel.
And then I tried to run sqlplus.
But It is saying sqlplus64: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory
Even though my PATH contains the PATH.
The below shows my PATH and the location of libsqlplus.so.
A#ubuntu:~$ sudo find / -name libsqlplus.so
/usr/lib/oracle/11.2/client64/lib/libsqlplus.so
A#ubuntu:~$ echo $PATH
/usr/lib/lightdm/lightdm:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/home/sangmin/eclipse:/usr/lib/oracle/11.2/client64/lib:/usr/lib/oracle/11.2/client64
Test your Oracle client. User either sqlplus either sqlplus64 depending on your platform. In my case, I used:
$ sqlplus64 username/password#//dbhost:1521/SID
If you get the next message, then you need to instruct sqlplus to use the proper libray:
sqlplus64: error while loading shared libraries: libsqlplus.so: cannot open shared object file: No such file or directory.
To do so, first find the location of Oracle libraries. The path should be something like /usr/lib/oracle/<version>/client(64)/lib/. In my case (Ubuntu 14.04 LTS, Intel on 64-bit), it was /usr/lib/oracle/11.2/client64/lib/.
Now, add this path to the system library list. Create and edit a new file:
$ sudo nano /etc/ld.so.conf.d/oracle.conf
Add inside the path:
/usr/lib/oracle/11.2/client64/lib/
Run now the dynamic linker run-time bindings utility:
$ sudo ldconfig
If sqlplus yields of a missing libaio.so.1 file, run:
$ sudo apt-get install libaio1
For other errors when trying to run sqlplus, please consult the Ubuntu help page.
Might worth checking the permissions issue:
sqlplus: error while loading shared libraries
PERMISSIONS:
I want to stress the importance of permissions for "sqlplus".
For any "Other" UNIX user other than the Owner/Group to be able to run sqlplus and access an ORACLE database , read/execute permissions are required (rx) for these 4 directories :
$ORACLE_HOME/bin , $ORACLE_HOME/lib, $ORACLE_HOME/oracore, $ORACLE_HOME/sqlplus
Environment. Set those properly:
A. ORACLE_HOME
(example: ORACLE_HOME=/u01/app/oranpgm/product/12.1.0/PRMNRDEV/)
B. LD_LIBRARY_PATH
(example: ORACLE_HOME=/u01/app/oranpgm/product/12.1.0/PRMNRDEV/lib)
C. ORACLE_SID
D. PATH
export PATH="$ORACLE_HOME/bin:$PATH"
Related
I am working in Ubuntu 16.04. I need to install gradle and the gradle is installed when i checked with sudo apt list --installed command but when i use gradle -version command it shows the following error,
JAVA_HOME is set to an invalid directory: /usr/lib/jvm/java-8-oracle/jre/bin/java
In sudo vim /etc/environment file,
PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games"
JAVA_HOME="/usr/lib/jvm/java-8-openjdk-amd64/"
http_proxy="http://username:password#IP:port no/"
https_proxy="https://IP:port no/"
ftp_proxy="ftp://IP:port no/"
I don't know where i made mistakes. Please help me.
Thanks.
On a 64bit openSuse 64 42.1 box;
readlink -f $(which java)
provided;
/usr/lib64/jvm/java-1.8.0-openjdk-1.8.0/jre/bin/java
But;
export JAVA_HOME=/usr/lib64/jvm/jre-1.8.0-openjdk
is the path that worked and allowed java emulator to run.
So i think we have to manually browse our file system and see what path to choose.
Today I faced this problem. I am using the default java that comes with your linux distro (so in my case, linux mint).
$ whereis java
This command gave me
java: /usr/bin/java /usr/share/java
So, I opened /user/bin. There was a link to Java. I right clicked it and selected follow original link. This lead me to /usr/lib/jvm/java-11-openjdk-amd64/bin/java.
So now that I know where this java is, I opened my .bashrc file, and edited the JAVA_HOME.
So for my case,
## My Custom variables
export JAVA_HOME=/usr/lib/jvm/java-11-openjdk-amd64
export PATH=$JAVA_HOME/bin:$PATH
This solved the problem.
Now if you are using some other java (say you downloaded from oracle and extracted the zip file ...), then you have to add that location. So for example, if your java is in /home/user/.sdkman/candidates/java/current, then
export JAVA_HOME=/home/user/.sdkman/candidates/java/current
export PATH=$JAVA_HOME/bin:$PATH
I see a mismatch. In your enviornment file the JAVA_HOME is set to "/usr/lib/jvm/java-8-openjdk-amd64/" and your mentioned that the error that you got relates to the JAVA_HOME as "/usr/lib/jvm/java-8-oracle/jre/bin/java"
If you JAVA is really installed in /usr/lib/jvm/java-8-oracle directory, then you need to ensure that the JAVA_HOME is set to that directory. And also your PATH reflects $JAVA_HOME/bin in it.
I typically install Oracle JDK/JRE separately in a separate directory such as /usr/local/jdk1.8.0 etc.
check the jvm installtion folder from Files
eg : /usr/lib/jvm/java-12-oracle
then in terminal run sudo nano /etc/environment and add the line
JAVA_HOME="/usr/lib/jvm/java-12-oracle"
Then open terminal and run
export JAVA_HOME="/usr/lib/jvm/java-12-oracle"
Setup
I'm following the installation directions in the mirthSync readme, which is to clone the repo. The next indication of usage that I can see is in the Examples section, which via CLI is to "pull Mirth Connect code from a Mirth Connect instance":
java -jar mirthsync.jar -s https://localhost:8443/api -u admin -p admin pull -t /home/user/
I'm assuming that after cloning the repo, one should cd into that directory and then run the java -jar... command with all the appropriate flag values (server, username, password, etc).
Error
After running the CLI command, I get this error:
Error: Unable to access jarfile mirthsync.jar
Question
Where is this mirthsync.jar file supposed to come from? Is there something I need to do in order to generate the mirthsync.jar file?
Generate it via lein uberjar (which creates target/uberjar/*-standalone.jar) or download it from a release.
I followed the Software Collections Quick Start and I now have Python 3.5 installed. How can I make it always enabled in my ~/.bashrc, so that I do not have to enable it manually with scl enable rh-python35 bash?
Use the scl_source feature.
Create a new file in /etc/profile.d/ to enable your collection automatically on start up:
$ cat /etc/profile.d/enablepython35.sh
#!/bin/bash
source scl_source enable python35
See How can I make a Red Hat Software Collection persist after a reboot/logout? for background and details.
This answer would be helpful to those who have limited auth access on the server.
I had a similar problem for python3.5 in HostGator's shared hosting. Python3.5 had to be enabled every single damn time after login. Here are my 10 steps for the resolution:
Enable the python through scl script python_enable_3.5 or scl enable rh-python35 bash.
Verify that it's enabled by executing python3.5 --version. This should give you your python version.
Execute which python3.5 to get its path. In my case, it was /opt/rh/rh-python35/root/usr/bin/python3.5. You can use this path to get the version again (just to verify that this path is working for you.)
Awesome, now please exit out of the current shell of scl.
Now, lets get the version again through this complete python3.5 path /opt/rh/rh-python35/root/usr/bin/python3.5 --version.
It won't give you the version but an error. In my case, it was
/opt/rh/rh-python35/root/usr/bin/python3.5: error while loading shared libraries: libpython3.5m.so.rh-python35-1.0: cannot open shared object file: No such file or directory
As mentioned in Tamas' answer, we gotta find that so file. locate doesn't work in shared hosting and you can't install that too.
Use the following command to find where that file is located:
find /opt/rh/rh-python35 -name "libpython3.5m.so.rh-python35-1.0"
Above command would print the complete path (second line) of the file once located. In my case, output was
find: `/opt/rh/rh-python35/root/root': Permission denied
/opt/rh/rh-python35/root/usr/lib64/libpython3.5m.so.rh-python35-1.0
Here is the complete command for the python3.5 to work in such shared hosting which would give the version,
LD_LIBRARY_PATH=/opt/rh/rh-python35/root/usr/lib64 /opt/rh/rh-python35/root/usr/bin/python3.5 --version
Finally, for shorthand, append the following alias in your ~/.bashrc
alias python351='LD_LIBRARY_PATH=/opt/rh/rh-python35/root/usr/lib64 /opt/rh/rh-python35/root/usr/bin/python3.5'
For verification, reload the .bashrc by source ~/.bashrc and execute python351 --version.
Well, there you go, now whenever you login again, you have got python351 to welcome you.
This is not just limited to python3.5, but can be helpful in case of other scl installed softwares.
When I create a new project and select to create a new Git repository, or when I try to change the version control system in project options I receive a RStudio error stating "Incorrect function" with a big X and no extra information.
The below link has a similar issue, but their solution of changing the path for git.exe has not helped (i have tried all three paths)
https://support.rstudio.com/hc/en-us/community/posts/200632528-Git-Error-Incorrect-Function
Some extra notes:
RStudio allows me to clone repository to set new working directory
Also git works in bash, so i feel this is an RStudio issue.
I encountered the same error. For me it also had to do with using a network path not a local directory for the project location (as for lewis1211).
Workaround: Map the network drive. E.g. Map your //server/share to some drive, say Z: (using map network drive, if you are using windows). If you set your project up under Z: then, it works.
If you have already chosen "git.exe" in RStudio --> Tools --> Global Options --> Git/SVN, then try to open Rstudio shell and type git init. In my case it showed "Permission denied", and after running as administrator the problem has gone.
This is only a partial answer if it fixes your problem: I reproduced this when trying to use a network path for a project location. When using a local directory no error occurs. Could indeed be an RStudio issue.
Run you R studio as Project administration.
This solves my issue.
SOLVED.
I had the same problem. The Git-RStudio-Connection fails but git is working perfectly in the CMD. When running the git init command in CMD it works and creates a .git folder. But running the git init command in the RStudio terminal fails with a message Warning: unable to access 'C:/Users/%username%/.gitconfig': Permission denied ... fatal: unknown error occured while reading the configuration files.
The Version Control Sytem (VCS) or git-Panel does not appear in RStudio and selecting it in the projects options leads to the same message Error: Unzulässige Function (eng. Error: Incorrect function).
A closer look into the .gitconfig file should give you a new solution approach hopefully without having administration rights. Comparing the installation on the integration worksation with a productive workstation shows, that on the Test-Machine an incomplete .gitconfig file is on C:/Users/%username%/.gitconfig and on the Productive-Machine a complete gitconfig file is on Z:/.gitconfig. By the way, Z is a mapped drive which is linking to the company's user-profile settings (see CMD > echo %HOMEDRIVE%).
According to this analysis there should be multiple possible solution approaches:
(1) delete the corrupt .gitconfig and hope the the system is correctly looking into your profiles directory
(2) complete the .gitconfig file that all necessary information are there. The message fatal: unknown error occured while reading the configuration files could actually be a hint, that the first message access... permission denied is false and the problem lies in the incomplete file.
(3) Be aware that there can be a confusion between ".gitconfig" as FILE and ".gitconfig" as FOLDER. Check this with changing directory with cd to folder and cat to show the file content. It will tell you that you cannot display a folder as file-content.
(4) Change the location of the config file with git config --file FullnameToGitconfig. e.g. git config --file %USERPROFILE%/.gitconfig or git config --file %USERPROFILE%/.gitconfig/gitconfig or git config --file %HOMEDRIVE%/.gitconfig etc.
[user]
name = DOE John
email = john.doe#acme.com
[merge]
tool = kdiff3
[mergetool "kdiff3"]
path = C:/Program Files/KDiff3/kdiff3.exe
[diff]
guitool = kdiff3
[difftool "kdiff3"]
path = C:/Program Files/KDiff3/kdiff3.exe
[core]
editor = \"C:/Program Files (x86)/GitExtensions/GitExtensions.exe\" fileeditor
I installed Hadoop and Created a user named hduser and changes owner of hadoop folder to hduser.
After installing Hadoop i try to execute the hadoop command to check whether it is installed or not but it is giving "hadoop" command not found.
Then i had given execute privilege to hduser on all the files inside hadoop folder include bin folder
But still output is same.
When i am trying the same hadoop command with root as a user its working fine.
I think it is related to unix commands. Please help me out to give my user the privilege to execute hadoop command.
One more thing if i switch to root then hadoop commands works fine.
It is not a problem of privileges. You can still execute hadoop, if you type /usr/local/hadoop/bin/hadoop, right?
The problem is that $PATH is user-specific.
You have to add your $HADOOP_HOME/bin to the $PATH, as hduser, not as root. Login as hduser first (or just type su hduser) and then export PATH=$PATH:/$HADOOP_HOME/bin, as #iamkristian suggests, where $HADOOP_HOME is the directory in which you have placed hadoop (usually /usr/local/hadoop).
I sounds like hadoop isn't in your path. You can test that with
which hadoop
If that gives you command not found the you probably just need to add it to your path. Depending on where you installed hadoop, you need to add this to your ~/.bashrc
export PATH=$PATH:/usr/local/hadoop/bin/
And then reopen your terminal