I'm Working with SSRS Report in CRM Then I have problem about DateTime Parameter before run report below.
First, I choose date from Datetime Picker below
Then TextBox show
In fact It's should show Only date But why it's show Date & Time
And after i Choose anything in parameter section Parameter always refresh and I surely I set automatic determine in .rdl file (from my experience its should not refresh)
Second, When I choose first date of month
TextBox show
Its show.
8-Jan-15
So My Question is.
Why Text Box show Invalid value.
Why its always refresh when i choose paremeter.
And How to fix it.
Thank you.
(I think I not happen for .rdl file)
I don't know CRM but in SSRS I would say
This seems to be a bug in CRM with using other date formats: https://community.dynamics.com/crm/f/117/t/138318
Parameters refresh in case other parameters are dependent on the previous parameter.
You can't fix the refresh, you can try changing your system date format but that's not a good fix. You can try this:
http://geekswithblogs.net/naijacoder/archive/2008/06/26/123422.aspx
Related
I am trying to build a PowerApp to log setup times of our machines by our fitters.
This is what my app looks like:
There are buttons named "Uhrzeit". Pressing these will write the current date and time into the Date/Time fields. I am using the following code:
UpdateContext({Total8:(Text( Now(); "[$-de-DE]dd/mm/yyyy hh:mm:ss" ))})
The Date/Time field is named Total8.
The code is working well but after saving the form and opening a new record the old data is still available in the fields. By clicking on the button "Zeiten zurücksetzen" I can "delete" the old data.
UpdateContext({Total8:""})
Problem: When I open one of the older records the old data is not available in the form. There is only the value of the last record. In the Common Data Service where my records are saved the values are correct.
As an example, I am saving this record:
When I open a new record, the values of the record 1 are still available. This should not be the case if my app worked properly.
For your Information:
If I enter the date/time without tapping the button, saving the record and opening a new record I don't have the problem. I think the "UpdateContext" code is not the code I should use here.
Can anyone help me solve the problem?
I don't think there's a problem with using the contexts in this way -- but remember that a context is just a variable. It isn't automatically linked to a datasource in any special way - so if you set it equal to Now(), it's going to keep that value until you do something different.
When you view an old record, you need to get the data from CDS and update your contexts to match the CDS data. Does this make sense?
Yeah thats my problem.
I want the variable to be linked to a datasource. Or is it possible to write the date/time into the fields without using a context variable?
How i can open a MS Access report without giving any parameter value? I do not want dialagoue box enter the parameter value, when i click on report button. I did not put any parameter value in any query and any form regarding to this report.
Thank you
Generally this means that your report has a field where its Control Source does not exist in the Report Record Source. Check the the parameter value being requested. It's quite possible that you just mis-keyed something in one of those two places..
I'm working with Crystal Reports for Visual Studio 2010. The data is in a SQL Server 2005 database. The field is a datetime field, within the database/table. It has both date and time in it. But my report refuses to see that field as anything other than a date field. Huh??? According to this article on C# Corner, there should be a Date, a Time and a Date And Time tab when customizing the display. No there isn't; the only data type tab I see, when I try to customize it, is Date.
So, how do I get the date and time to show up from a datetime field returned by the stored procedure, when CR for VS 2010 only wants to treat it as a Date field???
We finally found the solution. The report I'm working with is really old. It was started by someone over 10 years ago, using who knows what version of Crystal Reports was around then. My colleague decided to start a whole new report and drag the field first from the table, and then from the stored procedure that's used for the report, onto the new report. Well, the data type was now DateTime! The best we can figure is the original .rpt file must not have had a DateTime data type (that field in the table has been a DateTime for 15+ years). We even discovered that creating a new report based upon this existing report, doesn't resolve the issue; it still sees the field as a Date data type only. So we've got to create a new report and start over from stratch. Frankly, pretty awful to do, just for 1 field in the report, but oh well.
This shows you how to set CR to set how it interprets DateTime as either Date or DateTime:
SAP Community Network Issue
This might be a simple question. But I am trying to use a rule in an InfoPath field where if a user enters a certain value in a text box, a date box will populate with a certain date.
Example: User enters "Orange" in the Textbox1 field. Datefield1 should populate with 11/30/2010.
The problem is I have no idea how to setup/format the date in the rule box. See picture for details.
InfoPath marks the format as invalid. I've tried 2011-Nov-30, 30-Nov-2011, and a few more. Any ideas?
It has to be the date format yyyy-mm-dd ("2010-01-01"). Alternatively you can use the date function today() if it is always going to be the current date.
I have made a static html page (called start.jsp) containing a form where the user select 2 date ranges and this form has date pickers for those text boxes. When the user submits
the form, it should take them to the BIRT report that I have designed. It SHOULD
pass the 2 parameters that my report needs (start date and end date).
Here is the querystring that gets appended to the URL
birt-viewer/run__report=Business_Activity_Monitoring.rptdesign &FilterStartDate=2000-01-01&FilterEndDate=2009-01-01
I get an invalid date error:
org.eclipse.birt.report.exception.ViewerValidationException: The parameter "FilterStartDate" is invalid. The value "06-08-2010" is invalid with the type "dateTime".
How is it that if I remove the querystring completely, then BIRT will prompt me to enter the
start date and end date (screenshot attached).
I enter the exact same data that the form tries to send and it works!?
This proves that my date string is correctly formatted but yet it will not accept them if they
are sent to the BIRT report via the querystring? Seems like it has a problem with the
fact that its a string in the first place.
I have correctly set up these report parameters in my BIRT report. I have also tried changing them
by specifying the "Format as" value to be a "custom" YYYY-MM-dd but this didnt work.
Is it even possible to send date parameters to a birt report via querystring?
Im guessing the solution will involve converting these strings to dates within the birt report's "script" tab.
but I dont know how to access querystring variables from here or how to set report
parameter variables.
Thanks
-Tommy
Your report parameter probably has a data type of "DateTime". As such your passing of just the date is not sufficient. When you use the OOTB parameter request pages this is accounted for under the covers. Either change your parameter data type to "Date" or append a time signature to your parameter being supplied to the report via your page (i.e. 2009-01-01 00:00:00). Either approach should do the trick.
Good Luck!
The following is the format BIRT appears to use for validation of parameters:
DEFAULT_DATETIME_FORMAT = "yyyy-MM-dd HH:mm:ss.SSS"
So if you pass in date/time as it should work
&mydate=2009-11-22 00:00:00.0
If the start date parameter you are passing is 2000-01-01, why is it giving you an error message saying 06-08-2010 is invalid? It looks as though the date parameter is being set elsewhere within the report, either as a default value or possibly within an event script.
Check your date format; remember that MM is used for month and mm for minutes.
Also check this solution, found at the Eclipse Community Forums:
Try this in the URL:
&mydate=22/11/2009&__islocale=mydate
Replace mydate with your parameter
name. The __isLocale parameter
specifies that the parameter has been
localized.