I have a matrix as below
B = matrix(
c(2, 4, 3, 1, 5, 7),
nrow=3,
ncol=2)
B # B has 3 rows and 2 columns
# [,1] [,2]
#[1,] 2 1
#[2,] 4 5
#[3,] 3 7
I would like to create a data.frame with 3 columns: row number, column number and actual value from above matrix. I am thinking of writing 2 for loops. Is there a more efficient way to do this?
The output that i want (i am showing only first 2 rows below)
rownum columnnum value
1 1 2
1 2 1
Try
cbind(c(row(B)), c(col(B)), c(B))
Or
library(reshape2)
melt(B)
As per #nicola's comments, the output needed may be in the row-major order. In that case, take the transpose of the matrix and do the same
TB <- t(B)
cbind(rownum = c(col(TB)), colnum = c(row(TB)), value = c(TB))
data.frame(which(B==B, arr.ind=TRUE), value=as.vector(B))
Related
I need to select elements of a dataframe using the row indices, as stored in a vector. In other words, I have a vector or length equal to the number of columns in a data frame, and that vector contains the row numbers of the elements I need to extract (one element per column, in order).
How would I go about doing this?
Example:
vec <- c(1,2,1)
df <- data.frame(matrix(1:6, ncol = 3, nrow = 2))
That would look like this:
X1 X2 X3
1 1 3 5
2 2 4 6
And I would need to get elements (1,4,5) using the indices from vec = 1,2,1
We can use :
df[cbind(vec, 1:ncol(df))]
#[1] 1 4 5
Using cbind, we create a row and column index to subset values from df.
cbind(vec, 1:ncol(df))
vec
#[1,] 1 1
#[2,] 2 2
#[3,] 1 3
Using this matrix, we subset values from (row 1, column1), (row2, column2) and row(1, column3).
I understand what rowsum() does, but I'm trying to get it to work for myself. I've used the example provided in R which is structured as such:
x <- matrix(runif(100), ncol = 5)
group <- sample(1:8, 20, TRUE)
xsum <- rowsum(x, group)
What is the matrix of values that is produced by xsum and how are the values obtained. What I thought was happening was that the values obtained from group were going to be used to state how many entries from the matrix to use in a rowsum. For example, say that group = (2,4,3,1,5). What I thought this would mean is that the first two entries going by row would be selected as the first entry to xsum. It appears as though this is not what is happening.
rowsum adds all rows that have the same group value. Let us take a simpler example.
m <- cbind(1:4, 5:8)
m
## [,1] [,2]
## [1,] 1 5
## [2,] 2 6
## [3,] 3 7
## [4,] 4 8
group <- c(1, 1, 2, 2)
rowsum(m, group)
## [,1] [,2]
## 1 3 11
## 2 7 15
Since the first two rows correspond to group 1 and the last 2 rows to group 2 it sums the first two rows giving the first row of the output and it sums the last 2 rows giving the second row of the output.
rbind(`1` = m[1, ] + m[2, ], `2` = m[3, ] + m[4, ])
## [,1] [,2]
## 1 3 11
## 2 7 15
That is the 3 is formed by adding the 1 from row 1 of m and the 2 of row 2 of m. The 11 is formed by adding 5 from row 1 of m and 6 from row 2 of m.
7 and 15 are formed similarly.
I would like to do calculations across columns in my data, by row. The calculations are "moving" in that I would like to know the difference between two numbers in column 1 and 2, then columns 3 and 4, and so on. I have looked at "loops" and "rollapply" functions, but could not figure this out. Below are three options of what was attempted. Only the third option gives me the result I am after, but it is very lengthy code and also does not allow for automation (the input data will be a much larger matrix, so typing out the calculation for each row won't work).
Please advice how to make this code shorter and/or any other packages/functions to check out which will do the job. THANK YOU!
MY TEST SCRIPT IN R + errors/results
Sample data set
a<- c(1,2,3, 4, 5)
b<- c(1,2,3, 4, 5)
c<- c(1,2,3, 4, 5)
test.data <- data.frame(cbind(a,b*2,c*10))
names(test.data) <- c("a", "b", "c")
Sample of calculations attempted:
OPTION 1
require(zoo)
rollapply(test.data, 2, diff, fill = NA, align = "right", by.column=FALSE)
RESULT 1 (not what we're after. What we need is at the bottom of Option 3)
# a b c
#[1,] NA NA NA
#[2,] 1 2 10
#[3,] 1 2 10
#[4,] 1 2 10
#[5,] 1 2 10
OPTION 2:
results <- for (i in 1:length(nrow(test.data))) {
diff(as.numeric(test.data[i,]), lag=1)
print(results)}
RESULT 2: (again not what we're after)
# NULL
OPTION 3: works, but long way, so would like to simplify code and make generic for any length of observations in my dataframe and any number of columns (i.e. more than 3). I would like to "automate" the steps below, if know number of observations (i.e. rows).
row1=diff(as.numeric(test[1,], lag=1))
row2=diff(as.numeric(test[2,], lag=1))
row3=diff(as.numeric(test[3,], lag=1))
row4=diff(as.numeric(test[4,], lag=1))
row5=diff(as.numeric(test[5,], lag=1))
results.OK=cbind.data.frame(row1, row2, row3, row4, row5)
transpose.results.OK=data.frame(t(as.matrix(results.OK)))
names(transpose.results.OK)=c("diff.ab", "diff.bc")
Final.data = transpose.results.OK
print(Final.data)
RESULT 3: (THIS IS WHAT I WOULD LIKE TO GET, "row1" can be "obs1" etc)
# diff.ab diff.bc
#row1 1 8
#row2 2 16
#row3 3 24
#row4 4 32
#row5 5 40
THE END
Here are the 3 options redone plus a 4th option:
# 1
library(zoo)
d <- t(rollapplyr(t(test.data), 2, diff, by.column = FALSE))
# 2
d <- test.data[-1]
for (i in 1:nrow(test.data)) d[i, ] <- diff(unlist(test.data[i, ]))
# 3
d <- t(diff(t(test.data)))
# 4 - also this works
nc <- ncol(test.data)
d <- test.data[-1] - test.data[-nc]
For any of them to set the names:
colnames(d) <- paste0("diff.", head(names(test.data), -1), colnames(d))
(2) and (4) give this data.frame and (1) and (3) give the corresponding matrix:
> d
diff.ab diff.bc
1 1 8
2 2 16
3 3 24
4 4 32
5 5 40
Use as.matrix or as.data.frame if you want the other.
An apply based solution using diff on row-wise can be achieved as:
# Result
res <- t(apply(test.data, 1, diff)) #One can change it to data.frame
# Name of the columns
colnames(res) <- paste0("diff.", head(names(test.data), -1),
tail(names(test.data), -1))
res
# diff.ab diff.bc
# [1,] 1 8
# [2,] 2 16
# [3,] 3 24
# [4,] 4 32
# [5,] 5 40
We want to construct an adjacency matrix (value of 1 if A_Number called B_Number, 0 if otherwise).
Weight= number of times the two numbers called.
Input:
B = matrix(c(1,4,1, 2,4,1, 3,2,1, 4,5,1, 5,2,1),
nrow = 5,
ncol = 3,
byrow = TRUE)
colnames(B) <- c("A_NUMBER", "B_NUMBER", "Weight")
# A_NUMBER B_NUMBER Weight
# [1,] 1 4 1
# [2,] 2 4 1
# [3,] 3 2 1
# [4,] 4 5 1
# [5,] 5 2 1
Wanted output:
We tried following code:
p<-as.matrix(dcast(SNA_data, A_NUMBER~B_NUMBER, value.var="W", fill=0))
But this did not gave as an adjacency matrix as the names of the rows were not the same as the names of the columns.
Does somebody know how to make a proper adjacency matrix?
xtabs(Weight ~ A_NUMBER + B_NUMBER,B) will do it. If you want the zero rows/columns as well, just add some dummy rows (Weight=0) to your matrix, covering the full range of values that A_NUMBER and B_NUMBER might take.
I know there are similar questions but I couldn't find an answer to my question. I'm trying to rank elements in a matrix and then extract data of 5 highest elements.
Here is my attempt.
set.seed(20)
d<-matrix(rnorm(100),nrow=10,ncol=10)
start<-d[1,1]
for (i in 1:10) {
for (j in 1:10) {
if (start < d[i,j])
{high<-d[i,j]
rowind<-i
colind<-j
}
}
}
Although this gives me the data of the highest element, including row and column numbers, I can't think of a way to do the same for elements ranked from 2 to 5. I also tried
rank(d, ties.method="max")
But it wasn't helpful because it just spits out the rank in vector format.
What I ultimately want is a data frame (or any sort of table) that contains
rank, column name, row name, and the data(number) of highest 5 elements in matrix.
Edit
set.seed(20)
d<-matrix(rnorm(100),nrow=10,ncol=10)
d[1,2]<-5
d[2,1]<-5
d[1,3]<-4
d[3,1]<-4
Thanks for the answers. Those perfectly worked for my purpose, but as I'm running this code for correlation chart -where there will be duplicate numbers for every pair- I want to count only one of the two numbers for ranking purpose. Is there any way to do this? Thanks.
Here's a very crude way:
DF = data.frame(row = c(row(d)), col = c(col(d)), v = c(d))
DF[order(DF$v, decreasing=TRUE), ][1:5, ]
row col v
91 1 10 2.208443
82 2 9 1.921899
3 3 1 1.785465
32 2 4 1.590146
33 3 4 1.556143
It would be nice to only have to partially sort, but in ?order, it looks like this option is only available for sort, not for order.
If the matrix has row and col names, it might be convenient to see them instead of numbers. Here's what I might do:
dimnames(d) <- list(letters[1:10], letters[1:10])
DF = data.frame(as.table(d))
DF[order(DF$Freq, decreasing=TRUE), ][1:5, ]
Var1 Var2 Freq
91 a j 2.208443
82 b i 1.921899
3 c a 1.785465
32 b d 1.590146
33 c d 1.556143
The column names don't make much sense here, unfortunately, but you can change them with names(DF) <- as usual.
Here is one option with Matrix
library(Matrix)
m1 <- summary(Matrix(d, sparse=TRUE))
head(m1[order(-m1[,3]),],5)
# i j x
#93 3 10 2.359634
#31 1 4 2.234804
#23 3 3 1.980956
#55 5 6 1.801341
#16 6 2 1.678989
Or use melt
library(reshape2)
m2 <- melt(d)
head(m2[order(-m2[,3]), ], 5)
Here is something quite simple in base R.
# set.seed(20)
# d <- matrix(rnorm(100), nrow = 10, ncol = 10)
d.rank <- matrix(rank(-d), nrow = 10, ncol = 10)
which(d.rank <= 5, arr.ind=TRUE)
row col
[1,] 3 1
[2,] 2 4
[3,] 3 4
[4,] 2 9
[5,] 1 10
d[d.rank <= 5]
[1] 1.785465 1.590146 1.556143 1.921899 2.208443
Results can (easily) be made clearer (see comment from Frank):
cbind(which(d.rank <= 5, arr.ind=TRUE), v = d[d.rank <= 5], rank = rank(-d[d.rank <= 5]))
row col v rank
[1,] 3 1 1.785465 3
[2,] 2 4 1.590146 4
[3,] 3 4 1.556143 5
[4,] 2 9 1.921899 2
[5,] 1 10 2.208443 1