I'm trying to make some triangles but it ain't working like I want to, look at this:
<th>Rent <div class="triangle-up"></div></th>
With this CSS:
.triangle-down {
width: 0;
height: 0;
border-style: solid;
border-width: 5px 6px 0 6px;
border-color: #FFF transparent transparent transparent;
display: inline-flex;
}
.triangle-up {
width: 0;
height: 0;
border-style: solid;
border-width: 0 6px 5px 6px;
border-color: transparent transparent #FFF transparent;
display: inline-flex;
}
th {
text-align: left;
text-shadow: -1px -1px #000000;
background-image: -webkit-linear-gradient(top, #222222, #161717);
height: 20px;
padding: 7px;
}
This is the result:
As you can see, when using triangle-up it is not aligned with the text, which I want it to.
What can I do?
How about adding vertical-align: middle; to both the triangle-up and triangle-down selectors?
Ok the tags you are using in incorrect. Since you are using display:inline-flex I am assuming you dont care about earlier ie versions.
The best way to vertically align something is
position:absolute; top:50%; transform:translateY(-50%);
Check out this fiddle
Related
My code is very simple, but I'd like to move the css3 triangle to the middle of the text "click". could someone please help me?
**HTML**
<li>click</li>
**CSS**
li{list-style:none; }
.arrow{
width: 0px;
height: 20px;
border-style: solid;
display:block;
border-width: 0 5px 8px 5px;
border-color: #000 transparent;
}
ONLINE CODE: http://jsfiddle.net/8rRyf/
I'm not sure if there is a way to position borders, but something like this should do the trick.
li{list-style:none; }
a {
display: block;
width: 40px;
}
.arrow{
position: relative;
width: 0px;
height: 0px;
margin: 0 auto;
border-style: solid;
display:block;
border-width: 0px 5px 8px 5px;
border-color: #000 transparent;
}
<li>click<span class="arrow"> </span></li>
http://jsfiddle.net/8rRyf/19/
I dont want to add any extra element, so far this is the only way could figure it out.
Added text-indent in li did the trick!
li{list-style:none; margin-left:20px; text-indent: -8px;}
.arrow{
width: 0px;
height: 20px;
border-style: solid;
display:block;
border-width: 0 5px 8px 5px;
border-color: #000 transparent;
}
http://jsfiddle.net/8rRyf/24/
Attempting to use a custom hex color for my css triangle (border). However since it uses border properties I am unsure how to go about doing this. I would like to steer clear of javascript and css3 simply because of compatibility. I am trying to have the triangle have a white background with a 1px border (around the angled sides of the triangle) with color #CAD5E0. Is this possible? Here's what I have so far:
.container {
margin-left: 15px;
width: 200px;
background: #FFFFFF;
border: 1px solid #CAD5E0;
padding: 4px;
position: relative;
min-height: 200px;
}
.container:after {
content: '';
display: block;
position: absolute;
top: 10px;
left: 100%;
width: 0;
height: 0;
border-color: transparent transparent transparent #CAD5E0;
border-style: solid;
border-width: 10px;
}
My fiddle: http://jsfiddle.net/4ZeCz/
You actually have to fake it with two triangles....
.container {
margin: 15px 30px;
width: 200px;
background: #fff;
border: 1px solid #a00;
position: relative;
min-height: 200px;
padding: 20px;
text-align: center;
color: #fff;
font: bold 1.5em/180px Helvetica, sans-serif;
text-shadow: 0 0 1px #000;
}
.container:after,
.container:before {
content: '';
display: block;
position: absolute;
left: 100%;
width: 0;
height: 0;
border-style: solid;
}
.container:after {
top: 10px;
border-color: transparent transparent transparent #fdd;
border-width: 10px;
}
.container:before {
top: 9px;
border-color: transparent transparent transparent #a00;
border-width: 11px;
}
Updated Fiddle here
I know you accept that but check this one also with less css:
.container {
margin-left: 15px;
width: 200px;
background: #FFFFFF;
border: 1px solid #CAD5E0;
padding: 4px;
position: relative;
min-height: 200px;
}
.container:after {
content: '';
display: block;
position: absolute;
top: 10px;
right:-7px;
width: 10px;
height: 10px;
background: #FFFFFF;
border-right:1px solid #CAD5E0;
border-bottom:1px solid #CAD5E0;
-moz-transform:rotate(-45deg);
-webkit-transform:rotate(-45deg);
}
http://jsfiddle.net/4ZeCz/3/
I think this is a simpler one using clip-path:
.container {
width: 150px;
min-height: 150px;
background: #ccc;
padding: 8px;
padding-right: 6%;
display: inline-block;
clip-path: polygon(0% 0%,0% 100%,90% 100%,90% 5%,100% 10%,90% 15%,90% 0%);
}
<div class="container">
test content
</div>
Another way to accomplish this, especially for somebody who needs this to work with equilateral or even scalene triangles like I did, is to use filter: drop-shadow(...) with multiple values and no blur radius. This has the added benefit of not needing multiple elements, or access to both :before and :after (I was trying to accomplish this with :after content that was inline, so wanted to avoid absolute positioning too).
For the above case, the :after's CSS could look like this (fiddle):
.container {
margin-left: 15px;
width: 200px;
background: #FFFFFF;
border: 1px solid #CAD5E0;
padding: 4px;
position: relative;
min-height: 200px;
}
.container:after {
content: '';
display: block;
position: absolute;
top: 10px;
left: 100%;
width: 0;
height: 0;
border-style: solid;
border-width: 20px 0 40px 15px; /* skewed to show support for non-right-angle triangles */
border-color: transparent transparent transparent #fff;
filter: drop-shadow(1px 0 0 #CAD5E0) drop-shadow(0 .5px 0 #CAD5E0);
}
<div class="container">
Test Container
</div>
I think there are some limitations or weirdness, though:
No support in IE11 (though seems fine in FF, Chrome, and Edge)
I'm not quite sure why .5px for the <offset-y> value in the second drop-shadow() above appears more like 1px than 1px would have, though I imagine it's related to trigonometry (though at least on my monitor I see no difference between the actual trig-based values or .5px or even .1px for that matter).
Borders greater than 1px (well, their appearance that way) don't seem to work well. Or at least I haven't found the solution, though see below for a less-than-optimal way to go a little bigger. (I would think the documented-but-unsupported 4th parameter (<spread-radius>) of drop-shadow() might be what I'm really looking for instead of multiple filter values, but adding it in just broke things entirely.) Here you can see what starts to happen when going beyond 1px (fiddle):
.container {
background-color: #eee;
padding: 1em;
}
.container:after {
content: "";
width: 0;
height: 0;
border-style: solid;
border-width: 20.4px 10px 0 10px;
border-color: yellow transparent transparent transparent;
margin-left: .25em;
display: inline-block;
filter: drop-shadow(-6px -4px 0 green) drop-shadow(6px -4px 0 red) drop-shadow(0 6px 0 blue);
}
<div class="container">
Test Container
</div>
Notice the funniness that the first one (green) gets applied once, but the second one (red) is getting applied both to the yellow triangle created via border as well as the green drop-shadow(), and the last one (blue) gets applied to all of the above. (Perhaps that's also related to the .5px appearance thing).
But I guess you can take advantage of these drop-shadows building on each other if you need something wider-looking than 1px, by changing them to something like the following (fiddle):
filter: drop-shadow(0 0 2.5px red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red) drop-shadow(0 0 0 red);
where the very first one has a blur-radius set (2.5px in this case, though the result appears multiplied), and all the rest have blur at 0. But this will only work for the same color on all sides, and it results in some rounded-looking corners as well as quite rough edges the bigger you go.
.triangle{
position: absolute;
width:0px;
height:0px;
border-left: 45px solid transparent;
border-right: 45px solid transparent;
border-bottom: 72px solid #DB5248;
}
.triangle:after{
position: relative;
content:"!";
top:8px;
left:-8px;
color:#DB5248;
font-size:40px;
}
.triangle:before{
content:".";
color: #DB5248;
position: relative;
top:-14px;
left:-43px;
border-left: 41px solid transparent;
border-right: 41px solid transparent;
border-bottom: 67px solid white;
}
Over the last year, I noticed that lots of sites have moved their share/popularity stats to a left sidebar that remains visible on the screen even if you scroll the window down. Here is the URL for a page that has this kind of functionality: http://news.cnet.com/8301-31921_3-57371426-281/anti-sopa-forces-have-isp-snooping-bill-in-their-crosshairs
What's the best way to create that kind of sidebar?
an easy way is to use CSS to absolutely position it and set the Z index so that it appears above everything else
try this on your HTML page
<style>
.side-sharebar {
display: block;
left: 482px;
position: fixed;
top: 20px;
-moz-border-bottom-colors: none;
-moz-border-image: none;
-moz-border-left-colors: none;
-moz-border-right-colors: none;
-moz-border-top-colors: none;
background-color: #EEEEEE;
border-color: #CCCCCC transparent #CCCCCC #CCCCCC;
border-radius: 3px 0 0 3px;
border-style: solid;
border-width: 1px;
box-shadow: -6px 0 6px -6px rgba(0, 0, 0, 0.25) inset, 0 1px 0 #FFFFFF inset;
left: auto !important;
margin-left: -98px;
margin-top: 2px;
position: absolute;
top: 0;
width: 76px;
}
.side-sharebar ul li {
border-bottom: 1px solid #CCCCCC;
box-shadow: 0 1px 0 #FFFFFF;
padding: 10px 2px 10px 0;
position: relative;
text-align: center;
}
.side-sharebar ul {
list-style: none outside none;
}
</style>
....
<div class="side-sharebar"><ul><li>one</li><li>two</li></ul></div>
I want to make a CSS only speech bubble. So far, I have this...
Example
CSS
div {
position: relative;
background: #fff;
padding: 10px;
font-size: 12px;
text-align: center;
-webkit-border-radius: 20px;
-moz-border-radius: 20px;
border-radius: 20px;
}
div:after {
content: "";
display: block;
width: 0;
height: 0;
position: absolute;
left: 50%;
bottom: -60px;
margin-left: -15px;
border-width: 30px 20px 30px 20px;
border-style: solid;
border-color: #fff transparent transparent transparent;
}
jsFiddle.
...which is almost exactly what I want. However, I want a light border around the whole thing.
Obviously, on the main portion, that is simple as adding border: 1px solid #333 to the div.
However, as the tail of the bubble is a border hack, I can't user a border with it.
I tried setting a box shadow of 0 0 1px #333 but browsers apply the border to the rectangular shape of the element (which I guess is what they should do).
jsFiddle.
My next thoughts were finding a Unicode character that looks like a bubble tail and absolutely positioning it there, with text-shadow for the border and using z-index of the main bubble to hide the top shadow of the text.
What Unicode character would be suitable for this? Should I do something different? Do I need to resort to an image?
I only have to support Mobile Safari. :)
<div>Hello Stack Overflow!<span></span></div>
div span:after {
content: "";
display: block;
width: 0;
height: 0;
position: absolute;
left: 50%;
bottom: -51px;
margin-left: -15px;
border-width: 20px 20px 30px 20px;
border-style: solid;
border-color: #000 transparent transparent transparent;
}
http://jsfiddle.net/QYH5a/
For the Unicode character approach you suggested, the most appropriate would be ▼ U+25BC BLACK DOWN-POINTING TRIANGLE. I don't know whether iOS has glyphs for it.
Here is a similar solution:
http://jsfiddle.net/JyPBD/2/
<div>Hello Stack Overflow!<span></span></div>
body {
background: #ccc;
}
div {
position: relative;
background: #fff;
padding: 10px;
font-size: 12px;
text-align: center;
-webkit-border-radius: 20px;
-moz-border-radius: 20px;
border-radius: 20px;
border: 1px solid #333;
}
div:after {
content: "";
display: block;
width: 0;
height: 0;
position: absolute;
left: 50%;
bottom: -60px;
margin-left: -16px;
border-width: 30px 20px 30px 20px;
border-style: solid;
border-color: green transparent transparent transparent;
}
div span
{
border-color: #FF0000 transparent transparent;
border-style: solid;
border-width: 25px 15px;
bottom: -51px;
margin-left: -65px;
position: absolute;
z-index: 10;
}
You could use the filter property with box-shadow() to do it...
-webkit-filter: drop-shadow(1px 1px 1px #111) drop-shadow(-1px -1px 1px #111);
jsFiddle.
I'm trying to make a "priority marker" in css. I have a couple of issues. First: the text is not centered reasonably at all. Second: I'd prefer the width (at least) to change dynamically with the length of the text. Is either doable?
result:
My understanding of how to pick a font that fits with in this context is beyond my current css skills. If this has been done I don't really care to reinvent this...
.box {
border-color: orange;
border-style: solid;
text-align: center;
border-width: 1px 0px 1px 1px;
margin: 0px 8px 0px 0px;
background-color: yellow;
padding-right: 8px;
position: relative;
height:14px;
width:20px;
}
.arrow {
border-color: transparent transparent transparent orange;
border-style: solid;
border-width: 8px;
position: absolute;
right: -15px;
bottom: -1px;
height:0;
width:0;
}
.arrow2 {
border-color: transparent transparent transparent yellow;
border-style: solid;
border-width: 7px;
position: absolute;
right: -12px;
bottom: 0px;
height:0;
width:0;
}
<div class="{style.box}">42
<div class="{style.arrow}"></div>
<div class="{style.arrow2}"></div>
</div>
Add this to .box:
font-size:12px;
font-family:serif;
display:inline-block;
padding-left:5px;
And remove its width rule.