I would like to create a trigger on SQLite to update one table with values from more than one table. I have tried the code below but navicat for Sqlite wont save my trigger. Could someone help?
BEGIN
INSERT INTO hdClassSet (setNo, class, type, regdate, acYear)
VALUES (((SELECT max(setNo) FROM hdClassSet)+1),
old.clID,
0,
(date('now','localtime')),
(SELECT acID FROM tblAcad WHERE actv1=1));
END
I managed to save and test the trigger without the last value and it works. How can I reference another table that does not start or affected by the trigger? I will be grateful!
Related
I have a source and a target table. I need to make update and insert together in final table with following conditions:
1) When SourceTable.ProductName = TargetTable.ProductName and SourceTable.Amount = TargetTable.Amount Then
Update TargetTable set TargetTable.ValidFrom = sysdate
Also i need to insert like this,
Insert Into TargetTable(ProductName,Amount,ValidFrom,Version) Values(TargetTable.ProductName,TargetTable.Amount, sysdate, TargetTable.Version + 1)
This is to maintain version.
2) When there is no match then i need to insert directly like this,
Insert Into TargetTable(ProductName,Amount,ValidFrom,Version) Values(SourceTable.ProductName,SourceTable.Amount, sysdate,1)
As of now i am thinking of capturing these matching records in a Cursor and perform Update and Insert together in cursor loop. But i am willing to avoid loops a i have approx 10 millions of matching records.
We also have Merge statement, but I believe Merge do not support Update and Insert together in single "WHEN MATCHED" Clause. Please correct me if i am wrong?
Kindly suggest the best way to achieve this behavior.
I refactored a table that stored both metadata and data into two tables, one for metadata and one for data. This allows metadata to be queried efficiently.
I also created an updatable view with the original table's columns, using sqlite's insert, update and delete triggers. This allows calling code that needs both data and metadata to remain unchanged.
The insert and update triggers write each incoming row as two rows - one in the metadata table and one in the data table, like this:
// View
CREATE VIEW IF NOT EXISTS Item as select n.Id, n.Title, n.Author, c.Content
FROM ItemMetadata n, ItemData c where n.id = c.Id
// Trigger
CREATE TRIGGER IF NOT EXISTS item_update
INSTEAD OF UPDATE OF id, Title, Author, Content ON Item
BEGIN
UPDATE ItemMetadata
SET Title=NEW.Title, Author=NEW.Author
WHERE Id=old.Id;
UPDATE ItemData SET Content=NEW.Content
WHERE Id=old.Id;
END;
Questions:
Are the updates to the ItemMetadata and ItemData tables atomic? Is there a chance that a reader can see the result of the first update before the second update has completed?
Originally I had the WHERE clauses be WHERE rowid=old.rowid but that seemed to cause random problems so I changed them to WHERE Id=old.Id. The original version was based on tutorial code I found. But after thinking about it I wonder how sqlite even comes up with an old rowid - after all, this is a view across multiple tables. What rowid does sqlite pass to an update trigger, and is the WHERE clause the way I first coded it problematic?
The documentation says:
No changes can be made to the database except within a transaction. Any command that changes the database (basically, any SQL command other than SELECT) will automatically start a transaction if one is not already in effect.
Commands in a trigger are considered part of the command that triggered the trigger.
So all commands in a trigger are part of a transaction, and atomic.
Views do not have a (usable) rowid.
I use a database in my project and when i insert values into a table i need to check if the field already has a value that does not produce an insert.
for exemple:
INSERT INTO myTable (column1) values ('some_value1')
if some_value1 alredy exists in column1 do not insert the value.
Put a unique constraint on myTable.column1. Then, whenever you try to insert a duplicate value, it won't let you as it violates the constraint. You can either catch and handle this error, or just let the DB engine do it's thing automatically.
EDIT: Note that SQLite doesn't allow you to do many alterations to your table, once it's created; so you may have to recreate your table with the constraint in place.
I believe this can be handled using the conflict resolution IGNORE method on SQLite. The code below should do the trick. The column1 here should be set to unique for this.
INSERT OR IGNORE INTO myTable (column1) values ('some_value1')
I'm using the following links for reference;
http://www.sqlite.org/lang_insert.html
http://www.sqlite.org/lang_conflict.html
There is the table OLD and a similar one, NEW. I want to insert in the existing process that fills the table OLD a trigger event that for each new inserted row, this event will insert the newly inserted row to table NEW, as well. Inside the body of trigger, i need to include the query BELOW which aggregates values of OLD before inserted in NEW:
insert into NEW
select (select a.id,a.name,a.address,b.jitter,a.packet,a.compo,b.rtd,a.dur from OLD a,
select address,packet,compo, avg(jitter) as jitter, avg(rtd) as rtd from OLD
group by address,packet,compo ) b
where a.address=b.address and a.packet=b.packet and a.compo=b.compo;
can you correct any possible mistakes or suggest other trigger syntax on the statement below?
CREATE OR REPLACE TRIGGER insertion
after update on OLD
for each row
begin
MY select query above
end;
In a for each row trigger you cannot query the table itself. You will get a mutating table error message if you do.
I recommend only to use triggers for the most basic functionality such as handing out ID numbers and very basic checks.
If you do use triggers for more complex tasks you may very easily end up with a system that's very hard to debug and maintain because of all kinds of actions that appear out of knowhere.
Look at this question for another approach: getting rid of Insert trigger
Oracle Streams might also be a good solution. In the apply handler, you can include your own custom PL/SQL code. This procedure will be called after the COMMIT, so you can avoid mutating table errors.
However, Streams requires a large amount of setup to make it work. It might be overkill for what you are doing.
I'm unable to retrieve the latest inserted id from my SQL Server 2000 db using a typed dataset in asp.NET
I have created a tableadapter and I ticked the "Refresh datatable" and "Generate Insert, Update and Delete statements". This auto-generates the Fill and GetData methods, and the Insert, Update, Select and Delete statements.
I have tried every possible solution in this thread
http://forums.asp.net/t/990365.aspx
but I'm still unsuccesfull, it always returns 1(=number of affected rows).
I do not want to create a seperate insert method as the auto-generated insertCommand perfectly suits my needs.
As suggested in the thread above, I have tried to update the InsertCommand SQL syntax to add SELECT SCOPY_IDENTITY() or something similar, I have tried to add a parameter of type ReturnValue, but all I get is the number of affected rows.
Does anyone has a different take on this?
Thanks in advance!
Stijn
I decided to give up, I can't afford to waste any more time on this.
I use the Insert statement after which I do a select MAX(id) query to hget the insert ID
If anyone should have a solution, I'll be glad to read it here
Thanks
Stijn
I successfully found a way to get the incremental id after insert using my table adapter.
My approach is a little different, I'm using a Store procedure to make the insert, so my insert command has all the values but the ID, I made the sp return the ID just calling:
SET #ID=SCOPE_IDENTITY()
and then
COMMIT TRAN
and last line will be
RETURN #ID
Then I searched my table adapter parameters for InsertCommand and set the #RETURNVALUE to the column of the incremental ID of the table, so when it's executed automatically put the return value on the id field.
Hope this help
You need to tell your table's table-adapter to refresh the
data-table after update/insert operation.
This is how you can do that.
Open the properties of TableAdapter -> Default Select Query -> Advnaced options. and Check the option of Refresh the data table. Save the adapter now. Now when you call update on table-adapter, the data-table will be updated [refreshed] after the update/insert operation and will reflect the latest values from database table. if the primary-key or any coloumn is set to auto-increment, the data-table will have those latest value post recent update.
Now you can Call the update as TableAdapterObj.Update(ds.dataTable);
Read latest values from the DataTable(ds.dataTable) coloumns and assign respective values into the child table before update/insert. This will work exactly the way you want.
alt text http://ruchitsurati.net/files/tds1.png