I have installed the WooCommerce Product Search in my site and all works fine, but there is a small issue with the result page shown.
The result page used is the same than the one used as the main shop page, so the issue is that one slider and info should not be shown in the result page. This content has been put into the description textarea within the Edit Page using short codes.
I have the archive-product.php file open and do not know to avoid this.
I think I should use the is_search() function to check if page should renders on one way or another, but do not know what part of the code treat the info from the page description.
Related
This may seem novice, but I assure its not.
So, I have a site, which displays blog posts by date from new backwards.
Standard stuff. However, what I'm trying to do is create a temporary homepage, lets call it 'yogo'. It displays some ad, or image, with a button link.
What I'd like is a direct link to the actual blog feed which displays in a given theme site's frontpage. Is it just a block?
When Im in Appearance->Reading, I can change homepage to 'yogo' fine. But, say a visitor is on 'yogo', and I want a button they click on to link to what would be the original theme frontpage with blog content, it should technically be 'Home' but is that coded somewhere through the wordpress software like the Reading mentioned above.
Maybe Im missing something, should I shut off permalinks, and dig for it in actual page extension?
Im trying to avoid using Guten. or Elem. to build out a blog page.
Any advice, thanks in advance.
Once add your code in front-page.php or home.php you can use get_the_permalink() function to get the blog page URL and will pass in "a" HTML tag like this -
Your Blog Name
Might be it can help you.
Just a quick update. actually solved this.. In simple terms, it is possible to do this really quickly through the Wpress UI. From your backend, these are the steps in the following order:
(firstly. shout out 2 user 'mirchev' because if u didn't point out templates I would of been way off. actually after about an hour of research after that) So it all takes place in Setting->Reading. From what I've read, Wpress started off as a blog based system anyways, so it was solved a long time back. Basically to start, 1. Create 2 pages, no need to add any content as long as they are 'new' and you make note of the names.
2. Also important -in the template area to the right panel when the new page editor loads up (you don't need to add any texts, images or whatever, including the area on the right just make sure "default template" is selected. 3. Afterwards, these 2 pages are 2 be used in the Setting->reading section.
What you want to do is when you enter this setting of your Wpress site, instead of having your "homepage" radio button be "latest posts" set it to 'static page,' and 4. important - select 1 of the 2 new pages you created as the static page. 5. Now, also important, for the posts page, select the 2nd of the 2 new pages you created. 6. Once this is done, what happens is your website loads the static page, which you may customize however, and then you can go into your Appearance->menus and add the appropriate link to the 2nd of the 2 new pages you created to load the blog, or link to it whichever way you choose. More often than not a menu item should appear if that is the setting you customized.
..And that is all. if fact I was very surprised just how smooth it was.
good luck ! ..--'''~~**
Separation!
I want to use my Posts page with Elementor modules.
I have done my Homepage like that
but cannot do the same with Posts page.
I have created an empty page,
added some modules.
And selected this page as Posts page in Reading page.
But when I click a page on my website,
my Elementor Posts page is not seen,
the default Wordpress page is seen.
Update :
I'm using Neve theme on Wordpress v5.8
My website address is Tubefavorites.com
My homepage with Elementor and posts page with default Wordpress has different fonts
and my homepage and posts page's components are in different order.
(In homepage its Tags, Categories, ...
In my posts page its Tags, Last Posts, ...
I'm working online in browser (its not local).
There is no error on Chrome Console.
Update end.
Currently I'm trying this in Turkish pages.
I will make the English Elementor page after I fix this.
How can I fix this?
Thanks
Do you have Elementor enabled for post?
Thus, if I understood correctly, you have created a page post and want to add it as homepage. You should go to settings - reading and select via dropdown the page you have created! Then, you will see your page as homepage and not the default one
There is also an explanation in support forum, that someone has the same problem. Please read below:
"Looks like you’re trying to edit your Posts page that has been assigned in your WordPress Reading settings (Settings > Reading). If this is the case, you may not be able to edit the assigned Posts page directly with Elementor (Basic version).
You can try deselecting the page (in the “Posts Page” box within your Reading settings) then try editing this page with Elementor"
link to the source: https://wordpress.org/support/topic/cannot-load-posts-page-with-elementor/
Thus, disable your page through Settings - Reading, edit/modify (whatever you want) your Post page. After that, you could add your page blog posts URL to the meny item (or use this URL to wherever is nessecary)
EDITED
What plugin are you using for the translations?
I saw your homepage playing correct, right? Thus, you have selected your custom page correctly, through the Settings - Reading.
Now, if you want to see the same results in Turkish, you need to translate your home page too! So, add the translation in turkish language too, or duplicate the english version for turkish one and it will play!
UPDATED
I think there is an issue with the blog page (and single post template, as I am reading in WP forum for this theme). Try to check inside Appearence -> Customize, if there is any options there, thus could change the blog template. Somehow the theme overwrites your options. Furthermore, take a look at the blog theme's doc here:
https://docs.themeisle.com/article/1306-neve-blog-archive-options
I have learned that, I have to use Templates page, in Elementor Pro.
I didn't have been selected it.
Thanks to Hakkı Uçar for this
and for installing and for helping.
I'm working on a woocommerce storefront for a client that has a custom-built theme (by someone else) and for the life of me cannot find where I need to go to remove the subtext over the product preview on the main Shop page (the "at vero...")
See below:
Inspect element shows:
When I went into the wc-template-functions.php file I found the product_loop but there is nothing in here that I see generating the paragraph below the product title. Before I write some css to locate the <p> child element under parent woocommerce-LoopProduct-link woocommerce-loop-product__link - is there someone within WC functions I can locate this? The product has no categories or tags as I thought this could be where it was coming from. My Google searches have resulted in nothing specific to what I'm looking to change on the shop page, just changes to the product page which I do not need.
you can simply hide using CSS instead of change in core files
In my sites I use static page as a front page, and I did some other static pages to show some special static content (and embedded object) but this page sin particular I want to have the comment area shows.
My question is: how to enable comments -preferred hard code- in particular pages? at least having the same category?
I am using wordpress 4.1 and Avada Theme.
Well you can disable the comments on over all website by going to settings discussion and then uncheck the box that says, allow people to comment on new articles. This will remove all the comments on new pages and posts (starting from now). Now when you create a new page/post click on the button on the top that says "screen options". Check the box that says "discussion". Now you will have a new field in your post from where you can enable/disable the posts individually.
If you want to do it through the code, one way would be to create separate files for each page e.g page-contact.php, So when someone goes to the contact page, this file will be served, it can be a clone of page.php and just needs the comment part removed. Another way would be to goto page.php and wrap the comments code with a condition like
if(is_page('contact') || is_page('about')){
// code to show comments. Comments will be shown on contact and about page
}
I wrote a shortcode for wordpress to display wordpress posts and pages. Displaying posts is fine but when I try to display pages, it goes on infinitely. I guess one of the pages contains the shortcode and hence it displays recursively. Can anyone suggest me the solution for this. As to how I can prevent short code from being executed while displaying ?
not totally sure if I understand correctly. Maybe you just need to have the shortcode run not from a page but in a template php file.
http://codex.wordpress.org/Function_Reference/do_shortcode
otherwise you will need to exclude that page from being displayed in your shortcode manually, is it a plugin you are working with?