Related
Scatter plots are useless when number of plots is large.
So, e.g., using normal approximation, we can get the contour plot.
My question: Is there any package to implement the contour plot from scatter plot.
Thank you #G5W !! I can do it !!
You don't offer any data, so I will respond with some artificial data,
constructed at the bottom of the post. You also don't say how much data
you have although you say it is a large number of points. I am illustrating
with 20000 points.
You used the group number as the plotting character to indicate the group.
I find that hard to read. But just plotting the points doesn't show the
groups well. Coloring each group a different color is a start, but does
not look very good.
plot(x,y, pch=20, col=rainbow(3)[group])
Two tricks that can make a lot of points more understandable are:
1. Make the points transparent. The dense places will appear darker. AND
2. Reduce the point size.
plot(x,y, pch=20, col=rainbow(3, alpha=0.1)[group], cex=0.8)
That looks somewhat better, but did not address your actual request.
Your sample picture seems to show confidence ellipses. You can get
those using the function dataEllipse from the car package.
library(car)
plot(x,y, pch=20, col=rainbow(3, alpha=0.1)[group], cex=0.8)
dataEllipse(x,y,factor(group), levels=c(0.70,0.85,0.95),
plot.points=FALSE, col=rainbow(3), group.labels=NA, center.pch=FALSE)
But if there are really a lot of points, the points can still overlap
so much that they are just confusing. You can also use dataEllipse
to create what is basically a 2D density plot without showing the points
at all. Just plot several ellipses of different sizes over each other filling
them with transparent colors. The center of the distribution will appear darker.
This can give an idea of the distribution for a very large number of points.
plot(x,y,pch=NA)
dataEllipse(x,y,factor(group), levels=c(seq(0.15,0.95,0.2), 0.995),
plot.points=FALSE, col=rainbow(3), group.labels=NA,
center.pch=FALSE, fill=TRUE, fill.alpha=0.15, lty=1, lwd=1)
You can get a more continuous look by plotting more ellipses and leaving out the border lines.
plot(x,y,pch=NA)
dataEllipse(x,y,factor(group), levels=seq(0.11,0.99,0.02),
plot.points=FALSE, col=rainbow(3), group.labels=NA,
center.pch=FALSE, fill=TRUE, fill.alpha=0.05, lty=0)
Please try different combinations of these to get a nice picture of your data.
Additional response to comment: Adding labels
Perhaps the most natural place to add group labels is the centers of the
ellipses. You can get that by simply computing the centroids of the points in each group. So for example,
plot(x,y,pch=NA)
dataEllipse(x,y,factor(group), levels=c(seq(0.15,0.95,0.2), 0.995),
plot.points=FALSE, col=rainbow(3), group.labels=NA,
center.pch=FALSE, fill=TRUE, fill.alpha=0.15, lty=1, lwd=1)
## Now add labels
for(i in unique(group)) {
text(mean(x[group==i]), mean(y[group==i]), labels=i)
}
Note that I just used the number as the group label, but if you have a more elaborate name, you can change labels=i to something like
labels=GroupNames[i].
Data
x = c(rnorm(2000,0,1), rnorm(7000,1,1), rnorm(11000,5,1))
twist = c(rep(0,2000),rep(-0.5,7000), rep(0.4,11000))
y = c(rnorm(2000,0,1), rnorm(7000,5,1), rnorm(11000,6,1)) + twist*x
group = c(rep(1,2000), rep(2,7000), rep(3,11000))
You can use hexbin::hexbin() to show very large datasets.
#G5W gave a nice dataset:
x = c(rnorm(2000,0,1), rnorm(7000,1,1), rnorm(11000,5,1))
twist = c(rep(0,2000),rep(-0.5,7000), rep(0.4,11000))
y = c(rnorm(2000,0,1), rnorm(7000,5,1), rnorm(11000,6,1)) + twist*x
group = c(rep(1,2000), rep(2,7000), rep(3,11000))
If you don't know the group information, then the ellipses are inappropriate; this is what I'd suggest:
library(hexbin)
plot(hexbin(x,y))
which produces
If you really want contours, you'll need a density estimate to plot. The MASS::kde2d() function can produce one; see the examples in its help page for plotting a contour based on the result. This is what it gives for this dataset:
library(MASS)
contour(kde2d(x,y))
For educational purpose I'm trying to plot a singel horizontal "numberline" with some datapoints with labels in R. I came this far;
library(plotrix)
source("spread.labels.R")
plot(0:100,axes=FALSE,type="n",xlab="",ylab="")
axis(1,pos=0)
spread.labels(c(5,5,50,60,70,90),rep(0,6),ony=FALSE,
labels=c("5","5","50","60","70","90"),
offsets=rep(20,6))
This gave me a numberline with smaller lines pointing up to (and a little bit "in") the labels from where the datapoints should lie on the numberline - but without the points itself. Can anyone give me additional or alternative R-codes for solving thess problems:
- datapoints itself still missing are not plotted,
- and labels maybe not evenly divided over the whole numberline,
- and lines come into the labels and not merely point to the labels
Thank a lot,
Benjamin Telkamp
I usually like to create plots using primitive base R graphics functions, such as points(), segments(), lines(), abline(), rect(), polygon(), text(), and mtext(). You can easily create curves (e.g. for circles) and more complex shapes using segments() and lines() across granular coordinate vectors that you define yourself. For example, see Plot angle between vectors. This provides much more control over the plot elements you create, however, it often takes more work and careful coding than more "pre-packaged" solutions, so it's a tradeoff.
For your case, it sounds to me like you're happy with what spread.labels() is trying to do, you just want the following changes:
add point symbols at the labelled points.
prevent overlap between labels and lines.
Here's how this can be done:
## define plot data
xlim <- c(0,100);
ylim <- c(0,100);
px <- c(5,5,50,60,70,90);
py <- c(0,0,0,0,0,0);
lx.buf <- 5;
lx <- seq(xlim[1]+lx.buf,xlim[2]-lx.buf,len=length(px));
ly <- 20;
## create basic plot outline
par(xaxs='i',yaxs='i',mar=c(5,1,1,1));
plot(NA,xlim=xlim,ylim=ylim,axes=F,ann=F);
axis(1);
## plot elements
segments(px,py,lx,ly);
points(px,py,pch=16,xpd=NA);
text(lx,ly,px,pos=3);
I've run a 2d simulation in some modelling software from which i've got an export of x,y point locations with a set of 6 attributes. I wish to recreate a figure that combines the data, like this:
The ellipses and the background are shaded according to attribute 1 (and the borders of these are of course representing the model geometry, but I don't think I can replicate that), the isolines are contours of attribute 2, and the arrow glyphs are from attributes 3 (x magnitude) and 4 (y magnitude).
The x,y points are centres of the triangulated mesh I think, and look like this:
I want to know how I can recreate a plot like this with R. To start with I have irregularly-spaced data due to it being exported from an irregular mesh. That's immediately where I get stuck with R, having only ever used it for producing box-and-whisper plots and the like.
Here's the data:
https://dl.dropbox.com/u/22417033/Ellipses_noheader.txt
Edit: fields: x, y, heat flux (x), heat flux (y), thermal conductivity, Temperature, gradT (x), gradT (y).
names(Ellipses) <- c('x','y','dfluxx','dfluxy','kxx','Temps','gradTx','gradTy')
It's quite easy to make the lower plot (making the assumption that there is a dataframe named 'edat' read in with:
edat <- read.table(file=file.choose())
with(edat, plot(V1,V2), cex=0.2)
Things get a bit more beautiful with:
with(edat, plot(V1,V2, cex=0.2, col=V5))
So I do not think your original is being faithfully represented by the data. The contour lines are NOT straight across the "conductors". I call them "conductors" because this looks somewhat like iso-potential lines in electrostatics. I'm adding some text here to serve as a search handle for others who might be searching for plotting problems in real world physics: vector-field (the arrows) , heat equations, gradient, potential lines.
You can then overlay the vector field with:
with(edat, arrows(V1,V2, V1-20*V6*V7, V2-20*V6*V8, length=0.04, col="orange") )
You could"zoom in" with xlim and ylim:
with(edat, plot(V1,V2, cex=0.3, col=V5, xlim=c(0, 10000), ylim=c(-8000, -2000) ))
with(edat, arrows(V1,V2, V1-20*V6*V7, V2-20*V6*V8, length=0.04, col="orange") )
Guessing that the contour requested if for the Temps variable. Take your pick of contourplots.
require(akima)
intflow<- with(edat, interp(x=x, y=y, z=Temps, xo=seq(min(x), max(x), length = 410),
yo=seq(min(y), max(y), length = 410), duplicate="mean", linear=FALSE) )
require(lattice)
contourplot(intflow$z)
filled.contour(intflow)
with( intflow, contour(x=x, y=y, z=z) )
The last one will mix with the other plotting examples since those were using base plotting functions. You may need to switch to points instead of plot.
There are several parts to your plot so you will probably need several tools to make the different parts.
The background and ellipses can be created with polygon (once you figure where they should be).
The contourLines function can calculate the contour lines for you which you can add with the lines function (or contour has and add argument and could probably be used to add the lines directly).
The akima package has a function interp which can estimate values on a grid given the values ungridded.
The my.symbols function along with ms.arrows, both from the TeachingDemos package, can be used to draw the vector field.
#DWin is right to say that your graph don't represent faithfully your data, so I would advice to follow his answer. However here is how to reproduce (the closest I could) your graph:
Ellipses <- read.table(file.choose())
names(Ellipses) <- c('x','y','dfluxx','dfluxy','kxx','Temps','gradTx','gradTy')
require(splancs)
require(akima)
First preparing the data:
#First the background layer (the 'kxx' layer):
# Here the regular grid on which we're gonna do the interpolation
E.grid <- with(Ellipses,
expand.grid(seq(min(x),max(x),length=200),
seq(min(y),max(y),length=200)))
names(E.grid) <- c("x","y") # Without this step, function inout throws an error
E.grid$Value <- rep(0,nrow(E.grid))
#Split the dataset according to unique values of kxx
E.k <- split(Ellipses,Ellipses$kxx)
# Find the convex hull delimiting each of those values domain
E.k.ch <- lapply(E.k,function(X){X[chull(X$x,X$y),]})
for(i in unique(Ellipses$kxx)){ # Pick the value for each coordinate in our regular grid
E.grid$Value[inout(E.grid[,1:2],E.k.ch[names(E.k.ch)==i][[1]],bound=TRUE)]<-i
}
# Then the regular grid for the second layer (Temp)
T.grid <- with(Ellipses,
interp(x,y,Temps, xo=seq(min(x),max(x),length=200),
yo=seq(min(y),max(y),length=200),
duplicate="mean", linear=FALSE))
# The regular grids for the arrow layer (gradT)
dx <- with(Ellipses,
interp(x,y,gradTx,xo=seq(min(x),max(x),length=15),
yo=seq(min(y),max(y),length=10),
duplicate="mean", linear=FALSE))
dy <- with(Ellipses,
interp(x,y,gradTy,xo=seq(min(x),max(x),length=15),
yo=seq(min(y),max(y),length=10),
duplicate="mean", linear=FALSE))
T.grid2 <- with(Ellipses,
interp(x,y,Temps, xo=seq(min(x),max(x),length=15),
yo=seq(min(y),max(y),length=10),
duplicate="mean", linear=FALSE))
gradTgrid<-expand.grid(dx$x,dx$y)
And then the plotting:
palette(grey(seq(0.5,0.9,length=5)))
par(mar=rep(0,4))
plot(E.grid$x, E.grid$y, col=E.grid$Value,
axes=F, xaxs="i", yaxs="i", pch=19)
contour(T.grid, add=TRUE, col=colorRampPalette(c("blue","red"))(15), drawlabels=FALSE)
arrows(gradTgrid[,1], gradTgrid[,2], # Here I multiply the values so you can see them
gradTgrid[,1]-dx$z*40*T.grid2$z, gradTgrid[,2]-dy$z*40*T.grid2$z,
col="yellow", length=0.05)
To understand in details how this code works, I advise you to read the following help pages: ?inout, ?chull, ?interp, ?expand.grid and ?contour.
I am trying to plot a set of data in R
x <- c(1,4,5,3,2,25)
my Y scale is fixed at 20 so that the last datapoint would effectively not be visible on the plot if i execute the following code
plot(x, ylim=c(0,20), type='l')
i wanted to show the range of the outlying datapoint by showing a smaller box above the plot, with an independent Y scale, representing only this last datapoint.
is there any package or way to approach this problem?
You may try axis.break (plotrix package) http://rss.acs.unt.edu/Rdoc/library/plotrix/html/axis.break.html, with which you can define the axis to break, the style, size and color of the break marker.
The potential disadvantage of this approach is that the trend perception might be fooled. Good luck!
How to plot the density of a single column dataset as dots? For example
x <- c(1:40)
On the same plot using the same scale of the x-axis and y-axis, how to add another data set as line format which represent the density of another data that represents the equation of
y = exp(-x)
to the plot?
The equation is corrected to be y = exp(-x).
So, by doing plot(density(x)) or plot(density(y)), I got two separated figures. How to add them in the same axis and using dots for x, smoothed line for y?
You can add a line to a plot with the lines() function. Your code, modified to do what you asked for, is the following:
x <- 1:40
y <- exp(-x)
plot(density(x), type = "p")
lines(density(y))
Note that we specified the plot to give us points with the type parameter and then added the density curve for y with lines. The help pages for ?plot, ?par, ?lines would be some insightful reading. Also, check out the R Graph Gallery to view some more sophisticated graphs that generally have the source code attached to them.