I haven't been able to use the neater knitter package with the code chunks.
Basically there's only a few number of occasions in which it interprets them well, but for the most of it the chunks are not recognized as such. That is:
Running a markdown from RStudio only renders chunks before the file is saved. If the file has been saved, then it will show the code as is: no R output.
I also tried using knitr from within LyX, and this presented other problems. The simplest example knitr.lyx was rendered correctly as a pdf, but not html. Using more complicated documents, like the RJournal template showed other errors.
Rscript --verbose --no-save --no-restore
At first I thought it had to do with my Rstudio installation, but now I'm not so sure anymore.
By the way, I'm on Ubuntu 15.04 and the files that I'm using are examples from the documentation:
Rstudio > New File > Rmarkdown... renders R output only before it's saved.
knitr's manual in LyX from Github repo.
I found the answer for this.
It's very obvious and yet easy to overlook if you don't know it.
The problem was in saving the file with the wrong extension.
If you're using R code chunks you need .Rmd extension in Rstudio.
As I was starting with markdown I was using .md. Pfff.
Related
I'm trying to improve my workflow when working with R and generating documentation. I've been going between TeXStudio, JupyterLab and RStudio for a while, and I'm trying to improve my workflow. TeXStudio has limited R support, and RStudio limited support for LaTeX.
VS Code has support for multiple languages, including R and LaTeX. The fact that it can run both Jupyter notebooks, R notebooks, and LaTeX, and has plugins for other languages as well, makes it seem desirable. However, I am unable to find documentation on how to configure it to work with R and LaTeX code in the same file. In addition, I am unable to configure R notebooks to allow inline code execution output.
However, I am unable to (a) set up code execution output under the code for .Rmd notebooks, and (b) I can't figure out how to weave .Rnw (R/LaTeX) documents with Sweave/knitr.
I'm trying to find an IDE that would include features like:
Markdown, code and code execution output in the same document
Auto R and LaTeX code completion
Automatic display of R function documentation
Spell check
Simple R console access
Compile .Rnw
Syntax highlighting for both R code and LaTeX code
I am, primarily, requesting ways to configure VS Code, or, secondly, way to configure another IDE that can meet my requirements. A tutorial on this would be much appreciated.
After a bit of digging around, I found that VS Code does nearly all the things I need.
Auto R and LaTeX code completion, Display of R function documentation in a tab in VS Code, Simple R console access, and Syntax highlighting for both R code and LaTeX code:
The R and LaTeX Workshop extensions, will provide highlighting and autocompletion of code in both languages. By installing R, you can easily open a session in a terminal window in VS Code, and from there open documentation inside VS Code.
Spell check
Code Spell Checker offers spell check for multiple languages. Install the extension and any desired dictionaries, and set the langauges you want to be included in the extension settings.
Compile .Rnw files
Turns out LaTeX Workshop can actually do this by default.
Markdown, code and code execution output in the same document
This is the only thing VS Code doesn't do as far as I can tell. It can compile .Rmd files, however, but the output can only be seen in the compiled PDF. I consider this less important, since I can use Jupyter notebooks instead.
I've started using knitr (without pander) and I'm very impressed.
I can find instructions for writing inline knitr markdown – which will be processed even though a hash is written at the beginning of a line (which will be useful). However, it has occurred to me that if knitr can read and process such information, perhaps there is a way to write ALL markdown instructions e.g. ```{r} with a hash at the beginning of the line ? I.e., I would like it if ##```{r} also worked when run via knit.
This would allow me to create files which work without errors when run using R console and also when run via knit – which might be useful when files are submitted for review.
I am new to the R/exams package and I try to produce a pdf document from one of the templates provided by the developers. (http://www.R-exams.org/templates/confint3/)
I am able to compile a Rnw file into a HTML document using the commands
library("exams")
exams2html("confint3.Rnw")
When calling the function
exams2pdf("confint3.Rnw")
it gives the error message
! LaTeX Error: File `Sweave.sty' not found.
I have Latex installed and there are no problems using it in general. I do not understand:
Do I need to tell exams2pdf() the location of the latex installation?
Do I need to define a template (as plain.tex) first? How should it look like?
What is it that I do not understand?
I looked at the documentation of the exams package, I also tried exams2pdf() after installing and calling library("tinytex").
Any help where to look at or what to do is highly appreciated. Thank you!
Minimal example:
install.packages("exams")
install.packages("tth")
library("exams")
set.seed(1090)
exams2html("confint3.Rnw")
set.seed(1090)
exams2pdf("confint3.Rnw")
It is hard to diagnose what exactly goes wrong with the information provided. In any case, when running pdfLaTeX either through utils::texi2dvi() (the default when the R package tinytex is not installed) or through tinytex::latexmk() (the default when the R package tinytex is installed) does not find the Sweave.sty file provided by the R base system. What is not clear to me which LaTeX engine is running in the background: MikTeX on Windows?
There are several strategies that could resolve this issue:
Tell your LaTeX installation about the texmf directory provided by the R base system so that it is found no matter where on your system you call pdfLaTeX.
Use a different LaTeX installation, e.g., by installing TinyTeX (the LaTeX distribution) through tinytex (the R package): tinytex::install_tinytex(). This might be particularly attractive if you are not actually a LaTeX user and just need it to compile PDF exams.
Avoid using the Sweave.sty file in a custom template file, say myplain.tex. A suggestion for such a file is included at the end of this post.
Further details are discussed in this thread: https://tex.stackexchange.com/questions/153193/latex-error-sweave-sty-not-found
As for your three questions:
As already explained above: exams2pdf() leverages either utils::texi2dvi() or tinytex::latexmk(). So these need to know about the LaTeX installation - but this seems to be the case. They just don't find the texmf provided by base R.
You should not have to do this but it is certainly an option that you can use. As a starting point, run exams_skeleton(markup = "latex", writer = "exams2pdf"). Among other things this creates a templates folder where you could put the myplain.tex template below.
As I said above, it's hard to answer that with the information provided. Hopefully, one of the clues provided here gets you a couple of steps forward.
Content of myplain.tex:
\documentclass[a4paper]{article}
\usepackage[utf8]{inputenc}
\usepackage{a4wide,graphicx,color,verbatim,url,fancyvrb,ae,amsmath,amssymb,booktabs,longtable,eurosym}
\newenvironment{question}{\item \textbf{Problem}\newline}{}
\newenvironment{solution}{\textbf{Solution}\newline}{}
\newenvironment{answerlist}{\renewcommand{\labelenumi}{(\alph{enumi})}\begin{enumerate}}{\end{enumerate}}
\providecommand{\tightlist}{\setlength{\itemsep}{0pt}\setlength{\parskip}{0pt}}
\setkeys{Gin}{keepaspectratio}
\DefineVerbatimEnvironment{Sinput}{Verbatim}{fontshape=sl}
\DefineVerbatimEnvironment{Soutput}{Verbatim}{}
\DefineVerbatimEnvironment{Scode}{Verbatim}{fontshape=sl}
\newenvironment{Schunk}{}{}
\begin{document}
\begin{enumerate}
%% \exinput{exercises}
\end{enumerate}
\end{document}
I am building my first R package and I am facing some problems.
When I run knitr from the Rstudio I get the html vignette as I want it.
However when I run R CMD Build I realize that I have 2 vignettes.
One found in vignettes/vignette.html and the other in inst/doc/vignette.html
Each one of these gives a different result for the vignette, I tried to check the .Rmd for each and changed them to be the same but I still get different results.
The .Rmd file does not reflect the html file being produced for both vignettes?
Any ideas?
I would like to use knitr to create presentations that embed R objects and code.
For IT reasons I am restricted to vim, so i have found the available Rstudio+knitr examples fairly unhelpful. The vim section of the knitr documents is also very skinny, and therefore unhelpful.
Is someone able to provide some guidance on how to compile a *.Rnw or *.Rmd file using knitr (or alternately point me to a decent online tutorial?) using some combination of vim, R, and the command line?
thanks in advance
Instead of going through Rstudio, you can use the functions in the knitr package directly. There are some options you can tweak, but to get started, all you have to do is call the knit() function on your .Rnw file:
library(knitr)
knit('my_input.Rnw')
If you're missing some of Rstudio's features, it's worth remembering that most of them are just making use of things that are already available in various R packages, so you can usually find a way to use them when you don't have Rstudio available.