I am getting the following error while installing the apache sparkr package:
install_github("amplab-extras/SparkR-pkg", subdir="pkg")
Downloading github repo amplab-extras/SparkR-pkg#master
Installing SparkR
Error in isNamespaceLoaded(pkg) :
attempt to use zero-length variable name
I was able to load the SparkR library in R/RStudio by doing the following:
Download and setup SparkR
1. Download spark-1.4.0 and untar/unzip it
2. Install spark, then go to your directory /spark01.4.0/R
3. In a terminal, run ./install-dev.sh. This will create a folder called "lib" in your directory
Add SparkR to R .libPaths()
4. In a terminal:
cat >> $HOME/.Rprofile <<EOT
lib_path <- .libPaths()
lib_path <- c(lib_path,"/MyDirectory/spark-1.4.0/R/lib")
.libPaths(lib_path)
rm(lib_path)
EOT
Load R, then use library(SparkR).
I've been having the same problem with the pander package and managed a long-winded work around. I installed pander from Github to an earlier version of R (3.1.2 worked for me). I then copied across the package from \library\pander into my new R v3.2.0 installation. So far it seems to be working fine.
I've had a go at doing this for the sparkr package, but unfortunately it requires a more recent build of R. You might find that R v3.1.3 will work, but I'm not able to test that on my machine.
Related
I am trying to install package SBCK from R build using Rscript build.R -c -v -i in windows command prompt following the steps given here. However, I ended up with package SBCK being not installed because of following error/warning InstallationWarning: package 'SBCK' is in use and will not be installed. I have no package with name SBCK installed on my system, so I do not understand why I am getting this warning message and thus not to be able to install the R package.
I know that similar question have been asked before here but solution there does not work in my case.
I am using R version 4.2.0 on Windows 10.
Once 'build.R' is run, "SBCK_0.5.0.tar.gz" is created in the 'SBCK-R' folder.
You can now install it via the package archive file option or pointing to that file in the install.packages command. I faced the same issue and this solved it.
I came across a package that is not available on CRAN. I tried to install the package using:
Packages & Data > Package Installer > Local Binary Package > At User
Level > [FileName.tgz] > Install...
This didn't work and I am now trying to use the R CMD INSTALL command. However, it seems I need to run that command in the command line interface but I cannot get it to install properly.
The package I'm trying to install is called gEcon. It can be found here. In particular, I am getting the following error message after "installing" the package:
Error: package or namespace load failed for ‘gEcon’:
package ‘gEcon’ was installed by an R version with different internals; it needs to be reinstalled for use with this R version
I assume it's the way I'm installing it.
Thanks in advance.
You're going to need to install Xcode apparently, because you've got to install this from source per these directions:
Now, you've gotta update R to the latest stable release, or if you prefer you can find the exact minimum newest version needed for gEcon.
After upgrading R you can complete the installation from source.
Original answer to original question:
Two things:
To access the command line and use R CMD on an Apple computer, please use the terminal.app app. Please see this for more details.
An easier and probably better approach is to install your package from the author's Github (or BitBucket, etc) repository using devtools::install_github or just use devtools::install on the downloaded source project.
I was trying to install the package RINDSEL but I am unable to install it and I keep getting the following error:
Error in install.packages : cannot open the connection
I downloaded the package from:
rindsel_1.0_2.zip | Integrated Breeding Platform
and loaded it from the directory. Other packages from the directory can be installed but just not this one.
Is the package corrupt or could there be any other error?
I would really be grateful for any help. Thanks in advance
Rename the zip file RinSel Software into Rindsel. That's the name specified in the discription file.
Then, you can install the package in R with the command
install.packages("C:/path/to/Rindsel.zip",repos=NULL,type="win.binary")
That works fine... at first (!!!).
Problem with the Rindsel package is. It is quite old. It was build with R 2.13.1. Therefore, if you want to load the library which would be the next step to use the package in R you will get the error:
Problems building package (Error: "package has been build before R-3.0.0")
My suggestion: Contact the authors of the package and ask them if they can either provide the source file that you can build the package by yourself or if they can bundle the Rindsel package with a newer R version.
(Or you could try to hunt down an old R version and see if you can get the thing running with an old R... However, I would not seriously suggest to do that. It would probably result in conflicting dependencies with the other required packages...)
EDIT 15-02-2018: OP asked if one can build an R package with sources that are presumeably the Rindsel source files.
Yes, basically, you could do that. You would have to make a your own description and namespace file and put the source file in the R folder than invoke the command in R to build it....
But it's not neccessary with the script files provided by the link the OP posted.
OP, just run the scripts in R! It's quite easy.
Download the zip-file and extract it on your machine.
Go to that directory. The R command would be
setwd('path/to/your/directory')
Than run the R script, e.g, the KNIndex.r. It's simple:
source('KNIndex.r')
Then the script will run and produce some output / prompts.
For future readers,
I was able to fix the error by running RStudio with administrative privileges to get the command to work.
If that does not fix it, you might wish to try
Installing "r tools" if that is not installed already. That can be downloaded from
https://cran.r-project.org/bin/windows/Rtools/
Download a relevant package that you are trying to install (e.g., tidyverse_1.3.0.zip) from https://cran.rstudio.com/
and install that from local path
It can also be installed directly from the web using install.packages("https://cran.rstudio.com/bin/windows/contrib/4.0/tidyverse_1.3.0.zip")
I had the same problem. R was not able to extract and compile the package files to the default installation directory for some system-specific reasons (not R related).
I was able to fix this by specifying the installation directory of the package lib using:
install.packages("your package", lib = 'path/to your/required/installation/directory')
You can then load the package by specifying the lib.loc option while loading it:
library('your package', lib.loc='path/to your/required/installation/directory')
A better solution:
Create a new environment variable (if you are using windows) R_LIBS_USER with the following directory path/to your/required/installation/directory.
This will change the default installation directory of the packages and make it easier to load and install them without specifying the location everytime.
I am trying to run R code in Jupyter and the R Kernel was added. Most of the time, packages can be installed successfully. However, some of the packages, such as RCurl and ggmap, would got error while installing.
Example:
install.packages("RCurl")
Warning message in install.packages("RCurl"):
“installation of package ‘RCurl’ had non-zero exit status”Updating HTML index of packages in '.Library'
Making 'packages.html' ... done
What should I do?
Try to specify CRAN as repository in your install.packages statement when installing RCurl and ggmap. For example:
install.packages("RCurl", repos='http://cran.us.r-project.org')
This Stack Overflow post on installing R packages through Anaconda/Jupyter beyond those included in R essential provides more detail.
(Side note: I had encountered the same issue when trying to install R packages on computer clusters. This solution worked for me.)
use conda comment:
conda install r-RCurl
I kept getting the non-zero exit status when trying to install packages with Jupyter notebook with R kernel and was failing because of multiple dependencies when wanting to install a package. I am not an expert in any of these so please forgive me if I make an error in explaining or if it is a non-issue for you but please feel free to comment to clear things out. I just want to share my success story so hopefully it can help someone else: I am working on a MacBook Pro. Here are the information I get when I run R.version() on my jupyter notebook with R kernel:
$platform 'x86_64-conda_cos6-linux-gnu'
$arch 'x86_64'
$os 'linux-gnu'
$system 'x86_64, linux-gnu'
$language 'R'
$version.string 'R version 3.6.1 (2019-07-05)'
These are the steps to take to fix the issue:
Go to https://anaconda.org/
Search the package name that you are trying to install
Copy the one line that is given to install the package, it should be something like:
Conda install -c r r-caret #conda install -c r r-package_name
NOTE: sometimes during installing packages, you’re asked whether or not you want to continue, so add --y at the end of the above statement to continue, so something like this
Conda install -c r r-caret --y
(I will always add it just to be on the safe side)
Click on the new launcher (+ icon) to create a new notebook with PySpark (once opened it has .ipynp extension)
On the first cell paste the copied line from step 2 and run
Once done, restart the kernel on the current notebook
Restart the kernel on your other notebook with R kernel
Run library(package_name) on your notebook with R kernel (e.x. library(caret))
install.packages("Hmisc", .libPaths(), repos='http://cran.us.r-project.org')
This command will install the packagae in the conda
"/home/user/anaconda3/lib/R/library" and use the cran r repository as source.
Add path in Anaconda
As per this answer,
one can also add additional paths in anaconda to load libraries from (for eg., the location where R studio saves the user-installed packages) with
.libPaths( c( .libPaths(), "~/userLibrary") )
For example, the following worked for me:
In Anaconda :
.libPaths( c( .libPaths(), "C:\Users\name\Documents\R\win-library\3.5") )
When I tried to add anaconda's library path to RStudio, it resulted in errors (The procedure entry point MARK_NOT_MUTABLE could not be located in the dynamic link library << arose 4 times in succession) after installation of a package, though the package seemed to load.
Replace name with your local user folder name
Add/change path in RStudio
A useful link to make changes in default user-installed library paths :
https://www.accelebrate.com/library/how-to-articles/r-rstudio-library
To find out where a package has been installed:
find.package('package_name')
The directions nobody else supplied worked for me, but I found this guide, and it worked. Spent way too much time trying all these when I just needed a few simple commands. https://developers.refinitiv.com/en/article-catalog/article/setup-jupyter-notebook-r
I already had R and python installed, so I skipped to step 3. The only seems to mention windows, but it worked for me on mac as well. After following them I was able to install the packages using install.packages("dplyr", repos = "http://cran.us.r-project.org") in a cell in jupyter.
You have to create a directory in which your package will be and do for eg:
install.packages('ggplot2',loc='your directory')
First Step: You can install the IRkernel packages by running the following command in an R console:install.packages('IRkernel')
Second Step: You will have to make Jupyter see the newly installed R kernel by installing a kernel spec. To install system-wide, set user to False in the installspec command IRkernel::installspec(user = FALSE)
Setup Jupyter Notebook for R
I'm trying to install this cnv-seq package on my R library to help copying number variation analysis. However, when I type in
install.packages("cnv-seq")
in R command, an error code pops out saying it is not available for 3.1.1 version. So I tried the old versions as well. All says not available. And I double check with the menu, Packages-> Install packages->. No cnv-seq
Ok. Then I tried to install it from a local source which is the "cnv-seq.tar.gz"
when i type in
install.packages("C:/cnv-seq.tar.gz", repos=NULL, type="source")
it still returns an error that says cannot extract package from this file.
Installation of package had non-zero exit status.
Anything went wrong or is there another I can install this package manually to my PC? After take a look at a similar question here couple years ago,
How do I install an R package from source?
I still could not fix this problem.
This is a case of RTFM ;)
You can do the whole process from within R. Below, we download the archive to the temporary directory, then extract it and finally install it.
download.file('http://tiger.dbs.nus.edu.sg/cnv-seq/cnv-seq.tar.gz',
f <- tempfile())
untar(f, exdir=tempdir())
install.packages(file.path(tempdir(), 'cnv-seq', 'cnv'), type='source', repos=NULL)
I believe you first must untar the file. I believe 7zip has this capability if you do not have access to a linux machine. The linux command would be:
tar -xvf /path/to/file/cnv-seq.tar.gz
After you do this you should be able to import the package into R.