I am looking for reference docs for the Azure Resource Manager JSON templates. Does anyone know if there is reference material for these templates?
There is general reference for required parameters etc like at Create a template deployment.
I am basically looking for the full availability so I can correspond setup on the portal to the JSON template. Also availability of features with apiVersion releases. I remember there being a MSDN documentation for the changelog with api version releases but cannot find it now.
If you create a VM with the desired settings, extensions etc then you can view their json template via https://resources.azure.com/
This will give some visibility into the Classic* templates.
All of the ARM templates can be found on GitHub here: https://github.com/Azure/azure-resource-manager-schemas.
It includes preview templates and should provide all the information you're after to determine which features are present in which apiVersion release.
Microsoft has finally created what I was looking for 🎉: full documentation is now available at https://learn.microsoft.com/en-au/azure/templates/
After some digging I managed to get the following list of schemas:
http://schema.management.azure.com/schemas/2015-01-01/deploymentTemplate.json
http://schema.management.azure.com/schemas/2014-06-01/Microsoft.Web.json
http://schema.management.azure.com/schemas/2014-04-01-preview/Microsoft.Sql.json
http://schema.management.azure.com/schemas/2014-04-01/Microsoft.Insights.json
http://schema.management.azure.com/schemas/2014-02-26/microsoft.visualstudio.json
http://schema.management.azure.com/schemas/2014-04-01-preview/Microsoft.Cache.json
http://schema.management.azure.com/schemas/2014-04-01/Microsoft.BizTalkServices.json
http://schema.management.azure.com/schemas/2014-08-01/Microsoft.Scheduler.json
http://schema.management.azure.com/schemas/2014-04-01/SuccessBricks.ClearDB.json
http://schema.management.azure.com/schemas/2015-01-01/Microsoft.Resources.json
http://schema.management.azure.com/schemas/2015-01-01/Microsoft.Authorization.json
http://schema.management.azure.com/schemas/2014-10-01-preview/Microsoft.Authorization.json
This list notably excludes:
Microsoft.ClassicCompute
Microsoft.ClassicStorage
Microsoft.ClassicNetwork
So I guess we're left to figure stuff out from the templates on those
To my mind we can dig that way:
open the azure-resource-manager schemas
Look at the main form below:
If you open properties, you will find the format that we need to fill:
open parameters and look at the structure:
$ref: #/definitions/parameter invite us to look at the same documents in definitions.parameters where you will find some documentation (like value you can use etc):
finally, if you look to properties.resources, you will find a list of url like:
{ "$ref": "http://schema.management.azure.com/schemas/2015-07-01-preview/Microsoft.ServerManagement.json#/resourceDefinitions/node" }
{ "$ref": "http://schema.management.azure.com/schemas/2015-07-01-preview/Microsoft.ServerManagement.json#/resourceDefinitions/gateway" }
if you open one of these url, you will find the JSON format you are looking for (here is a part of the first one):
There is not much available...
Azure Resource Manager Template Language
https://azure.microsoft.com/en-us/documentation/articles/resource-group-authoring-templates/
And then you can look at the different json.schemas that I have managed to find
deploymentTemplate
http://schema.management.azure.com/schemas/2014-04-01-preview/deploymentTemplate.json
visualstudio
http://schema.management.azure.com/schemas/2014-02-26/microsoft.visualstudio.json
Sql
http://schema.management.azure.com/schemas/2014-06-01/2014-04-01-preview/Microsoft.Sql.json
Web
http://schema.management.azure.com/schemas/2014-06-01/Microsoft.Web.json
deploymentParameters
http://schema.management.azure.com/schemas/2014-04-01-preview/deploymentParameters.json
If you use Visual Studio to edit the json-template file you get intellisense (sometimes) which help a bit. But the lack of documentation is really annoying...for example I have no clue if the schemas listed above are the most recent or not, and I have no idea where to find which one is the most resent.
Edit:
I came across the list of additions and changes to the Service Management APIs. Seems to be a bit outdated, 2015-01-01 is the current version and it's not there.
Edit2:
With the Iaas updates at Build 2015, there seems to also be a lot of Azure Quickstart Templates. At minimum, they have the particular cases I was looking for with storage accounts.
Related
Currently i am generating a report (we are getting files are uploaded within a time stamp).
I am getting all files and folders.Iterating the result and checking created date one by one.That is taking too much time approx 8 min to revert with resuls.Can anyone tell me is there any alfresco report api that i can use? or using solr how to fetch the result?
I like to follow an approach which is maybe not really orthodox. Usually, you don't want to report on all documents, only document using a specific type or aspect. So, what I do is to create a Java behaviour on onCreate, onUpdate and onDelete that updates a custom database with only the metadata that I'm interested in. Then, I can connect any OOTB reporting tools such as Pentaho, Jasper or Tableau. You have of couse some other traditional alternatives, such as:
Using this module developed by a community member: http://fcorti.com/alfresco-audit-analysis-reporting/
Or using the module provided by Alfresco: http://docs.alfresco.com/analytics/concepts/analytics-using.html
SOLR/Lucene is not an option, querying DB directly is not an option either (performance wise).
I would suggest using one of the options available (AAAR for instance) or developing something on your own following the same principles.
I did little bit investigation on this and found below link.
http://docs.alfresco.com/4.0/tasks/audit-recording-values.html
I think you can user auditService in alfresco and get your things done.There are few alfresco webservices(related to audit) already available which will allow you to filter response.In case if you need to customize it , than you can create webscript and use auditService in it.
You can use below url for browsing all your alfresco webservice.
http://localhost:8080/alfresco/service/index
I google a lot but not find any solution. Below is my problem :
I make a simple project where I use reference "IdentityServer4.Postgresql": "1.0.0"
where "using IdentityServer4.Services.InMemory" works perfectly.
But when I use "IdentityServer4.Postgresql": "2.0.0" then IdentityServer4.Services.InMemory always shows error.
That means version 2 of IdentityServer4.Postgresql not support IdentityServer4.Services.InMemory.
How can I use IdentityServer4.Services.InMemory for "IdentityServer4.Postgresql": "2.0.0"?
Thanks in advance.
IdentityServer4.Postgresql is not a part of the IdentityServer project, but sounds like a community contribution. You may have a better result by contacting the library creator.
Otherwise, you could try the official IdentityServer4.EntityFramework package that is maintained by the IdentityServer team in combination with an Entity Framework Core database provider for PostgreSQL.
The official quickstarts only show adding Entity Framework in the 8th quickstart. You'll have to do each one in succession up to the eighth one to fully understand / make sure to have the code you need.
After you have Entity Framework added to the configuration, you can support a Postgres database by just adding dependencies.
We have a requirement that on a page publish, we need to:
Find a component presentation that has a component based upon a particular schema.
Extract certain field vales from that component and store them in a custom database table that's available to our .NET application (on the Content Delivery side).
I think this is a good candidate for either a Deployer extension or a Storage extension - but I'm a little unclear which and why having never written either?
I've ruled out the Event System as this kind of code would be located on the CM, which seems like the wrong "side" to me - my focus is on extending what happens on the CD-side after a page is published.
Read a few articles on Tridion World (this, this, this and this) and I think a storage extension would be the better choice?
Mihai's article seems to be very close to what we need, where he uses a new item type mapping:
<ItemTypes defaultStorageId="brokerdb" cached="true">
<Item typeMapping="PublishAction" cached="false" storageId="searchdb" /></ItemTypes>
But how does Tridion "know" to use this new item type when content is published, (its not one of the defined TYPE_NAMEs, which is kind of the point)?
I should clarify I'm a .NET/C# dev not a Java dev so this is probably really obvious to Java people - apologies if it is!
Cheers
Tridion will not know by default how to deploy your new entity. My advise is to create a Deployer Module (your links should give you enough information about how you can do that) that executes in post-processing phase (of the deployment process), that processes all components from the deployment/transport package, extracts the needed information and uses a custom Storage Extension to store the needed information.
Be careful: you need to set-up in config your new type but you also need to use it yourself from that Deployer Module.
Hope this helps.
We are creating ReST Web Services using ASP.NET and OpenRasta.
Is there any tool that can could help us:
create WADL file
or/and create human readable API documentation similar which decribed resources/HTTP
methods supported for each resource, etc ?
Looks like REST Describe & Compile should do the trick.
On the WADL developer site Marc Hadley
maintains a command line tool named
WADL2Java. The ambitious goal of REST
Describe & Compile is to provide sort
of WADL2Anything. So what REST
Describe & Compile does is that it:
Generates new WADL files in a completely interactive way.
Lets you upload and edit existing WADL files.
Allows you to compile WADL files to source code in various programming
languages.
For OpenRasta, it'd be possible to use a UriDecorator to have help-like URIs defined for your resources (such as /myResource$help). You can then rewrite the URI before parsing to something yo can document easily, parse teh uri, find the resource type, and rewrite to /help/{resourcetype}
From there you register a resource for your help system:
ResourceSpace.Has.ResourcesOfType()
.AtUri("/help/{resourceType}")
.HandledBy()
.RenderedByXxx()
Then you can create your handler to return the documentation about a resource. You could for example use the IOperationCreator service to know which http methodds are available and with what input arguments, use the ICodecRepository to see what media types may be accepted as input, and potentially what a media type serialization would look like by calling the codec and generating an html friendly view of it.
That's definitly an area we're going to work on for the next version.
We are using SourceForge Enterprise Edition 4.4 in one of our project.
My question is, in CollabNet SFEE (SourceForge Enterprise Edition 4.4), how will we get attachments associated with an Artifacts Using SFEE SOAP API?
We have made our own .net 2.0 client. We are not using .net SDK provided by Collabnet,
If you commit with a message you can add "[artf1000]" (where artf1000 is your artifact number) to the beginning or end of your commit message. Then it will associate to that artifact you can also do this with documents using doc1000, to get the id of the item you can use the URL it is what is after the http://sfeeserver/sf/go/.
Documents and artifacts are the only item I have used this for so I am not sure about other types of links, but I would imagine anything that has a /go/ID could be referenced by the ID.
ie:
http://sfeeserver/sf/go/artf1000
http://sfeeserver/sf/go/doc1000
Edited to add:
I have seemingly successfully tried this with releases, tasks, and discussions as well.
You can cheat a little bit and have a look at the scripts from SFEE. Log into your SFEE via SSH and take a look at the following script:
/usr/local/sourceforge/sourceforge_home/integration/post-commit.py
Maybe it helps...