I want to push some changes to my GitHub repository and I receive the following error, which I have been trying to solve for the last couple of hours.
error: cannot run rpostback-askpass: No such file or directory
fatal: could not read Username for 'https://github.com': Device not configured
What I have just done is
Open a new repository on Github
Go to code and copy the https link
Go to R Studio > New Project > Version Control > Git
Paste the https link to repository URL
Write some code and save it to an R file
Select the file > Commit > and Push
and I receive this error, which I was not getting previously. (Note that I took a long break and during this time I have not committed anything to Github but previously, I have not face any error like that.)
I have searched some solution on the internet, while some suggested to use SSH key instead of https, I could not find a neat solution (that might be because I am not familiar with the Github workflow)
Therefore, I would appreciate if you can just provide me a clean solution on how to solve this problem. Thank you for your attention beforehand.
PS: I am using a Mac if that would matter.
This should be linked to the lack of credential helper which means Git is trying to read credentials from your terminal, since it exhausted other options.
Check your git config --global credential.helper first.
Try and install GCM, the Git Credential Manager (which is no longer GCM-core).
And reference it in your config:
git config credential.helper manager
I'd like to install the pymongo library but I'm getting the following error:
(C:\Users\xxxxxxx\AppData\Local\Continuum\anaconda3) C:\Users\xxxxxxx>
conda install -c anaconda pymongo
Fetching package metadata ...
CondaHTTPError: HTTP 000 CONNECTION FAILED for url <https://conda.anaconda.org/a
naconda/win-64/repodata.json>
Elapsed: -
An HTTP error occurred when trying to retrieve this URL.
HTTP errors are often intermittent, and a simple retry will get you on your way.
ConnectTimeout(MaxRetryError("HTTPSConnectionPool(host='conda.anaconda.org', por
t=443): Max retries exceeded with url: /anaconda/win-64/repodata.json (Caused by
ConnectTimeoutError(<urllib3.connection.VerifiedHTTPSConnection object at 0x000
00000054D6128>, 'Connection to conda.anaconda.org timed out. (connect timeout=9.
15)'))",),)
Steps taken to resolve:
1. Update C:\Users\\xxxxxxx\.condarc file with the following:
channels:
- defaults
ssl_verify: false
proxy_servers:
http: http://sproxy.fg.xxx.com:1000
https: https://sproxy.fg.xxx.com:1000
2. (C:\Users\xxxxxxx\AppData\Local\Continuum\anaconda3) C:\Users\xxxxxxx>
conda config --set ssl_verify False
Additional Info:
(C:\Users\xxxxxxx\AppData\Local\Continuum\anaconda3) C:\Users\xxxxxxx>
conda info
Current conda install:
platform : win-64
conda version : 4.3.27
conda is private : False
conda-env version : 4.3.27
conda-build version : 3.0.22
python version : 3.6.2.final.0
requests version : 2.18.4
config file : C:\Users\xxxxxxx\.condarc
netrc file : None
offline mode : False
user-agent : conda/4.3.27 requests/2.18.4 CPython/3.6.2 Windows/7 W
indows/6.1.7601
administrator : False
A number of posts online simply reinstalled Anaconda, any other options apart from a fresh install?
This works a charm:-
Just copy these:-
libcrypto-1_1-x64.dll
libssl-1_1-x64.dll
from D:\Anaconda3\Library\bin to D:\Anaconda3\DLLs.
Execute the following command in the cmd prompt/terminal:
conda config --set ssl_verify no
I try to create a virtual env with python 2.7 with anaconda, the base env is python 3.7. I encounter the exactly same problem. It turns out that there isn't such problem with other virtual envs with python 3.7 or 3.6.
This post works perfectly to solve my problem on win7 with anaconda prompt.
It basically says you need to add the following directories into your user environment path in windows (go to Start and type in: View Advanced System Settings, then select Environmental Variables: then select Path and click Edit: finally you can click New and add a path):
C:\your_directory_to_anaconda3\Anaconda3\Scripts
C:\your_directory_to_anaconda3\Anaconda3\
C:\your_directory_to_anaconda3\Anaconda3\Library\bin -- This is the directory for openssl
If you added conda to your PATH variables, remove it and use the "Anaconda Prompt". This solved the problem for me.
See: https://github.com/conda/conda/issues/8046#issuecomment-450582208
I faced this issue when I tried to create environment. I solved it by first activating conda base environment by using:
conda activate base
then I created the environment
conda create -n myenv python=3.7
Check the proxy URL
Verify .condarc file
For me, the problem was with the indentation in the .condarc file.
proxy_servers:
http: http://testproxy:8080
https: https://testproxy:8080
My authenticated proxy server is configured with a domain whitelist for massive and repeated downloads so root or local sudoer doesn't need to be authenticated.
Adding conda.anaconda.org is not enough as this repo redirect its traffic to amazonaws.com.
In my case, adding ".amazonaws.com" to the whitelist solved the issue.
The issue was resolved by adding a username and password to file C:\Users\xxxxx.condarc
channels:
- defaults
ssl_verify: false
proxy_servers:
http: http://xxxxx:password#sproxy.fg.abc.com:yyyy
https: https://xxxxx:password#sproxy.fg.abc.com:yyyy
I had the same problem on Windows 10-64 bit and intuitively installed the 64-bit version of miniconda. However, it results in exactly the same error above. Installing 32 bit conda installer has resolved the issue
Before installing some package (pydicom) the installation run just fine. After
it I tried to install matplotlib, but I got the same error as yours.
I tried conda config --set ssl_verify no but it didn't solve the problem so I set it again to true.
Fortunately, I had a virtual environment where I installed my packages. I closed all Anaconda prompts and tried in a new test environment. Magically, the install worked. I came back to my original virtual env and run the install again, and it worked!.
It might be that I just had to wait for some time before I could use conda install again.
One other thing I could do is remove the package that caused the problem, but I didn't have the chance to try it. If it has anything to do with some virtual environments not being affected, then one possible way to guard against this is to clone the environment before installing any new package.
Edit: I tried the same solution but It did not work. But instead of showing the error immediately, it asks me whether I want to proceed. I deactivated the env, and re-opened anaconda prompt, then did the same steps as above and worked again.
I also had the Same Issue, I resolved by installing 32 bit Anaconda Installer.
Which resolved the CondaHTTPError: HTTP 000 CONNECTION, on Windows 64 bit.
I faced this issues after "conda clean -a" on win-64.
Activating and deactivating existing conda env resolved the issue.
You might need to upgrade your openssl installation
You can download it here (Try the latest version):
https://slproweb.com/products/Win32OpenSSL.html
Source:
https://github.com/ContinuumIO/anaconda-issues/issues/6424#issuecomment-464660808
My issue was simply not running the conda init command prior to attempting to create an environment.
Came across the CondaHTTP Connection error after installing Anaconda environment on a new Windows 10 computer. I tried virtually all the recommendations above unsuccessfully! Looking up the Anaconda archives ( https://repo.continuum.io/archive/ ), I downloaded the immediate previous release .... and on installation and rebooting my PC, all is now wellscreenshot of release
In short - installing Microsoft Visual C++ Redistributable for Visual Studio solved my problem.
In more detail: upon trying a suggested solution of installing a new version of OpenSSL, the installation process told me I was missing a dependency - the Visual Studio Redistributable package. The installer led me to a direct download page of the 2017 version. I can't find that page now, but the official release of 2019 can be found here, and should work as well (found under Other Tools and Frameworks).
Uninstalling and reinstalling anaconda for all users (instead, of current user only, requires admin privileges) and activating the option to add Anaconda to PATH during the installation process, fixed the issues for me.
Thank you everyone for your responses. In my case, I found out that my Kaspersky Internet Security was blocking it the whole time. The moment I quit the application all applications were downloaded. Please check your firewall settings before trying all the above options.
I tried all of these solutions and none worked for me. After running the command
conda config --remove-key channels
in the Anaconda Prompt, everything started working for me on my next attempt.
Adding that I had the same problem on ubuntu on WSL. None of the solutions worked for me, until I realized I was working on WSL version 1 (I thought I'd already upgraded). Upgrading from WSL 1 to WSL 2 solved the problem for me.
Running following these two commands worked for me.
conda config --remove-key proxy_servers
conda clean --source-cache
I'd tried all of the advice on this and many other webpages.
In the end I broadcast a "help me Obiwan Kenobi, you're my only hope message" to a large group of people at work and one of them who used python all the time was able to help me
The trick was to set several windows environmental variables
CURL_CA_BUNDLE
REQUESTS_CA_BUNDLE
SSL_CERT_FILE
To my company's root certificate (a .cer or .crt) which I had downloaded to a spot on my disk
You may also need to add (in my case)
C:\Users\kdalbey\Anaconda3\Scripts
(or your particular \Anaconda3\Scripts) to your path.
And then I set proxies just for good measure
note I previously copied libcrypto-1_1-x64.dll, libcrypto-1_1-x64.pdb, libssl-1_1-x64.dll, libssl-1_1-x64.pdb from anaconda3\Library\bin to anaconda3\DLLs so that could be part of the secret sauce
and it didn't work until I killed and restarted anaconda-navigator
Two steps to deal with this error.
The Anaconda prompt configures the path, to include all the necessary executable files (for instance Library\bin - On Windows, launch it with admin permission). So that you need to use it to execute conda :
Update conda with conda update conda
Exit my proxy software which solved the issue.
I would like summarize some of the proposed answers in this post and propose my experience on that. As it can be understood from the error explanation, the error is related to the connection and I strongly believe that no need to uninstall and reinstall anything if the real cause of the problem be known. My problem gone away after the system powered off and powered on again one day later. So, some possible causes and their solutions (these solutions could be tested in order based on the written bulleted order) could be as follows:
Crash in anaconda prompt:
Probable solutions:
Deactivating and activating the environment, without removing all packages or …, or
Closing/reopening the prompt (Michael Heidelberg) or
Using cmd.exe instead, perhaps
Non-responsiveness of the anaconda site:
Massive site traffics related probable issues, that could be the reason of non-responsiveness or to temporary block some IPs
Probable solutions:
Retying as recommended in the error: HTTP errors are often intermittent, and a simple retry will get you on your way. It solves my problem sometimes. or
Activate or deactivate VPNs or Proxies (like use in .condarc; see: Github sroder, Nandhan Thiravia, Vinod Sangale, Peter Lucas, Sunding Wei).
Try after a while if you have time
System firewall block the site:
That might be happened by activating and deactivating of VPNs, repeatedly or by some other works
Probable solutions:
Finding the issue in system firewall and allowing the connection in the firewall settings (ScienceJedi, Github)
Reboot, perhaps
If the aforementioned ways didn't solve the problem, testing the related answers in the following order:
Add ...\Anaconda3\Scripts, ...\Anaconda3\, and ...\Anaconda3\Library\bin to the path (talentcat, skerjj, Victor Ochieng, jankap), perhaps need a reboot after (lightarrow)
Copying libcrypto-1_1-x64.dll and libssl-1_1-x64.dll from D:\Anaconda3\Library\bin into D:\Anaconda3\DLLs (Swapnil)
I think it could be used in the first step because It is unlikely to be cause of any other problem. The reason I didn't mention this at the beginning is that the developers could placed these files in that directory during installation, too, in default, but they didn't; perhaps it had some reasons (Github).
Note: these files are for Python >3, and I didn't find them for Python 2. Perhaps they have another names.
It must be said that my problem didn't solve by this solution.
Keep your SSL stack up-to-date (kamal dua, Anaconda troubleshooting, update openssl, Abdulrahman Bres, Update to openssl 1.1.1)
I didn't recommend it at first because Its not a good idea to unset ssl verification unless you know what you are doing (Pratyush comment) and somewhere I read that it couldn't return to True again.
It must be said that my problem didn't solve by this solution, too.
conda config --set ssl_verify false
conda update openssl ca-certificates certifi
"Script does not exist at specified location: /opt/codedeploy-agent/deployment-root/76b33ccc-594b-4d58-a1b8-e40d054c64b7/d-AVYMCK28I/deployment-archive/scripts/Applicationstoptest.sh"
This is the error I am getting can any one please help me how to resolve this issue
Make sure you're using relative paths in your appspec.yml.
I had the same issue. I followed this process and it did helped me.
The ApplicationStop hook is being called from the previously installed deployment before trying to run the current deployment appspec.yml file.
In order to prevent this from happening you'll have to remove any previously installed deployment from the server.
Stop the code deploy agent - sudo service codedeploy-agent stop
clear all deployments under /opt/codedeploy-agent/deployment-root
Restart the code deploy agent - sudo service codedeploy-agent start
copied ans from here so don't have to open new link.
Thanks #paul
The paths used in source in the AppSpec file are relative paths, starting from the root of your revision. Also please make sure the appspec.yml file and the other files in the application bundle are not wrapped inside another folder.
I found my answer here: https://stackoverflow.com/a/27925591/1056283
The application stop hook uses a previous deployment to look for the script to invoke, so if the structure of your deploy package changes, there may not be a script to call at the specified location yet. The deploy fails and the script never arrives at the new location. Look in the linked answer for the steps to resolve it.
I followed all the step is mention in given below url to build my project( I am using win7 OS).
https://github.com/adobe/brackets-shell/wiki/Building-brackets-shell.
actullly i want to create brackets installer (installed wix 3.7).
but i am getting cef-extract failed error.
even though i also used grunt cef-extract --force.
after that its throunging new error.
create -project failed after that i am not able to process further.
can some one help me.
thanks in advanced.
Regards
ashish .
If you include the exact console output you're seeing, it would be much easier to help you. But based on snags other people have encountered recently, you can try these things:
Make sure your PATH includes Python 2.7 (otherwise "create-project" will fail).
Delete all these folders to be sure you're starting from a clean slate: deps, Debug, include, libcef_dll, Release, Resources.
Just run the high-level tasks grunt setup and grunt build, following the Building brackets-shell instructions. (There's a known bug where grunt cef-extract fails when run standalone).