The currency required format looks like
1,100,258
100,258
23,258
3,258
Or all integers like
123456 or 2421323 and so on.
I type below in ValidationExpression
(^[0-9]{1,3}(,\d{3})*) | (^[0-9][0-9]*)
But it doesn't work.
Do you have ignore pattern whitespace on? If not, remove the two spaces on each side of the pipe.
Since you're trying to match either, you should stick a marker $ at the end of the string, like so
Also what is the point of ^[0-9][0-9]*, when you can use ^[0-9]+?
^([0-9]{1,3}(?:,\d{3})*|[0-9]+)$
or
^(\d{1,3}(?:,\d{3})*|\d+)$
Explanation:
^ # Anchors to the beginning to the string.
( # Opens CG1
\d{1,3} # Token: \d (digit)
(?: # Opens NCG
, # Literal ,
\d{3} # Token: \d (digit)
# Repeats 3 times.
)* # Closes NCG
# * repeats zero or more times
| # Alternation (CG1)
\d+ # Token: \d (digit)
# + repeats one or more times
) # Closes CG1
$ # Anchors to the end to the string.
Related
For a text field, I would like to expose those that contain invalid characters. The list of invalid characters is unknown; I only know the list of accepted ones.
For example for French language, the accepted list is
A-z, 1-9, [punc::], space, àéèçè, hyphen, etc.
The list of invalid charactersis unknown, yet I want anything unusual to resurface, for example, I would want
This is an 2-piece à-la-carte dessert to pass when
'Ã this Øs an apple' pumps up as an anomalie
The 'not contain' notion in R does not behave as I would like, for example
grep("[^(abc)]",c("abcdef", "defabc", "apple") )
(those that does not contain 'abc') match all three while
grep("(abc)",c("abcdef", "defabc", "apple") )
behaves correctly and match only the first two. Am I missing something
How can we do that in R ? Also, how can we put hypen together in the list of accepted characters ?
[a-z1-9[:punct:] àâæçéèêëîïôœùûüÿ-]+
The above regex matches any of the following (one or more times). Note that the parameter ignore.case=T used in the code below allows the following to also match uppercase variants of the letters.
a-z Any lowercase ASCII letter
1-9 Any digit in the range from 1 to 9 (excludes 0)
[:punct:] Any punctuation character
The space character
àâæçéèêëîïôœùûüÿ Any valid French character with a diacritic mark
- The hyphen character
See code in use here
x <- c("This is an 2-piece à-la-carte dessert", "Ã this Øs an apple")
gsub("[a-z1-9[:punct:] àâæçéèêëîïôœùûüÿ-]+", "", x, ignore.case=T)
The code above replaces all valid characters with nothing. The result is all invalid characters that exist in the string. The following is the output:
[1] "" "ÃØ"
If by "expose the invalid characters" you mean delete the "accepted" ones, then a regex character class should be helpful. From the ?regex help page we can see that a hyphen is already part of the punctuation character vector;
[:punct:]
Punctuation characters:
! " # $ % & ' ( ) * + , - . / : ; < = > ? # [ \ ] ^ _ ` { | } ~
So the code could be:
x <- 'Ã this Øs an apple'
gsub("[A-z1-9[:punct:] àéèçè]+", "", x)
#[1] "ÃØ"
Note that regex has a predefined, locale-specific "[:alpha:]" named character class that would probably be both safer and more compact than the expression "[A-zàéèçè]" especially since the post from ctwheels suggests that you missed a few. The ?regex page indicates that "[0-9A-Za-z]" might be both locale- and encoding-specific.
If by "expose" you instead meant "identify the postion within the string" then you could use the negation operator "^" within the character class formalism and apply gregexpr:
gregexpr("[^A-z1-9[:punct:] àéèçè]+", x)
[[1]]
[1] 1 8
attr(,"match.length")
[1] 1 1
Say I have a dataframe df in which a column df$strings contains strings like
[cat 00.04;09]
[cat 00.04;10]
and so on. I want to remove all characters between "[cat" and "]" to yield
[cat]
[cat]
I've tried this using gsub but it's not working and I'm not sure what I'm doing wrong:
gsub('cat*?\\]', '', df)
Note that cat*?\\] patten matches ca, then any 0+ t chars but as few as possible and then ].
You want to match any chars other than ] between [cat and ]:
gsub('\\[cat[^]]*\\]', '[cat]', df$strings)
Here,
\\[ - matches [
cat - matches cat
[^]]* - 0+ chars other than ] (note that ] inside the bracket expression should not be escaped when placed at the start - else, if you escape it, you will need to add perl=TRUE argument since PCRE regex engine can handle regex escapes inside bracket expressions (not the default TRE))
\\] - a ] (you do not even need to escape it, you may just use ]).
See the R demo:
x <- c("[cat 00.04;09]", "[cat 00.04;10]")
gsub('\\[cat[^]]*\\]', '[cat]', x)
## => [1] "[cat]" "[cat]"
If cat can be any word, use
gsub('\\[(\\w+)[^]]*\\]', '[\\1]', x)
where (\\w+) is a capturing group with ID=1 that matches 1 or more word chars, and \\1 in the replacement pattern is a replacement backreference that stands for the group value.
How do I match the year such that it is general for the following examples.
a <- '"You Are There" (1953) {The Death of Socrates (399 B.C.) (#1.14)}'
b <- 'Þegar það gerist (1998/I) (TV)'
I have tried the following, but did not have the biggest success.
gsub('.+\\(([0-9]+.+\\)).?$', '\\1', a)
What I thought it did was to go until it finds a (, then it would make a group of numbers, then any character until it meets a ). And if there are several matches, I want to extract the first group.
Any suggestions to where I go wrong? I have been doing this in R.
You could use
library(stringr)
strings <- c('"You Are There" (1953) {The Death of Socrates (399 B.C.) (#1.14)}', 'Þegar það gerist (1998/I) (TV)')
years <- str_match(strings, "\\((\\d+(?: B\\.C\\.)?)")[,2]
years
# [1] "1953" "1998"
The expression here is
\( # (
(\d+ # capture 1+ digits
(?: B\.C\.)? # B.C. eventually
)
Note that backslashes need to be escaped in R.
Your pattern contains .+ parts that match 1 or more chars as many as possible, and at best your pattern could grab last 4 digit chunks from the incoming strings.
You may use
^.*?\((\d{4})(?:/[^)]*)?\).*
Replace with \1 to only keep the 4 digit number. See the regex demo.
Details
^ - start of string
.*? - any 0+ chars as few as possible
\( - a (
(\d{4}) - Group 1: four digits
(?: - start of an optional non-capturing group
/ - a /
[^)]* - any 0+ chars other than )
)? - end of the group
\) - a ) (OPTIONAL, MAY BE OMITTED)
.* - the rest of the string.
See the R demo:
a <- c('"You Are There" (1953) {The Death of Socrates (399 B.C.) (#1.14)}', 'Þegar það gerist (1998/I) (TV)', 'Johannes Passion, BWV. 245 (1725 Version) (1996) (V)')
sub("^.*?\\((\\d{4})(?:/[^)]*)?\\).*", "\\1", a)
# => [1] "1953" "1998" "1996"
Another base R solution is to match the 4 digits after (:
regmatches(a, regexpr("\\(\\K\\d{4}(?=(?:/[^)]*)?\\))", a, perl=TRUE))
# => [1] "1953" "1998" "1996"
The \(\K\d{4} pattern matches ( and then drops it due to \K match reset operator and then a (?=(?:/[^)]*)?\\)) lookahead ensures there is an optional / + 0+ chars other than ) and then a ). Note that regexpr extracts the first match only.
I thought I had a great regex for limiting the number of words entered into a TextBox, however I discovered, it fails when there is punctuation in the text.
How can I modify this regex (or use a different one) that correctly counts words that may be made up of several sentences or contain other symbols?
^(?:\b\w+\b[\s\r\n]*){1,10}$
This limits the words to 10.
I think this is the ONLY WAY it can be done.
I would like to see a better way if it exists.
(requires an atomic group)
For Unicode:
^\s*(?>[^\pL\pN]*[\pL\pN](?:[\pL\pN_-]|\pP(?=[\pL\pN\pP_-])|[?.!])*\s*){1,10}$
Explained
^
\s*
(?>
[^\pL\pN]* [\pL\pN] # Not letters/numbers, followed by letter/number
(?:
[\pL\pN_-] # Letter/number or '-'
|
\pP # Or, punctuation if followed by punctuation/letter/number or '-'
(?= [\pL\pN\pP_-] )
|
[?.!] # Or, (Add) Special word ending punctuation
)*
\s*
){1,10}
$
For Ascii:
^\s*(?>[\W_]*[^\W_](?:\w|[[:punct:]_-](?=[\w[:punct:]-])|[?.!])*\s*){1,10}$
Expanded
^
\s*
(?>
[\W_]* [^\W_]
(?:
\w
|
[[:punct:]_-]
(?= [\w[:punct:]-] )
|
[?.!]
)*
\s*
){1,10}
$
Regular Expression To exclude sub-string name(job corps)
Includes at least 1 upper case letter, 1 lower case letter, 1 number and 1 symbol except "#"
I have written something like below :
^((?!job corps).)(?=.*[0-9])(?=.*[a-z])(?=.*[A-Z])(?=.*[!#$%^&*]).*$
I tested with the above regular expression, not working for special character.
can anyone guide on this..
If I understand well your requirements, you can use this pattern:
^(?![^a-z]*$|[^A-Z]*$|[^0-9]*$|[^!#$%^&*]*$|.*?job corps)[^#]*$
If you only want to allow characters from [a-zA-Z0-9^#$%&*] changes the pattern to:
^(?![^a-z]*$|[^A-Z]*$|[^0-9]*$|[^!#$%^&*]*$|.*?job corps)[a-zA-Z0-9^#$%&*]*$
details:
^ # start of the string
(?! # not followed by any of these cases
[^a-z]*$ # non lowercase letters until the end
|
[^A-Z]*$ # non uppercase letters until the end
|
[^0-9]*$
|
[^!#$%^&*]*$
|
.*?job corps # any characters and "job corps"
)
[^#]* # characters that are not a #
$ # end of the string
demo
Note: you can write the range #$%& like #-& to win a character.
stribizhev, your answer is correct
^(?!.job corps)(?=.[0-9])(?=.[a-z])(?=.[A-Z])(?=.[!#$%^&])(?!.#).$
can verify the expression in following url:
http://www.freeformatter.com/regex-tester.html