I have a series of data that increases by time and resets to zero at 18:00 every day. How can I make a Graphite plot that only contains datapoints at 17:59 in the last 30 days?
I have tried summarize(1d, max, false), but it by default bins data into buckets that are calculated by rounding to the nearest interval to current time. So I cannot specify the beginning time of each bucket to be 18:00.
I couldn't find anything that exactly matches what you want. There are functions like timeSlice and timeStack but they do not really fit.
An alternative is to use the graphite function nonNegativeDerivative. It ignores when counters are reset to zero and only shows counter increments.
I cannot seem to determine why Grafana is only displaying data points for the past minute even though we have been collecting data for longer than that (couple days).
That is, switching to "5 minutes ago" only displays the last minute of data and seems to cut off with each refresh. However, selecting a specific time range displays all data points correctly.
For this data path, storage-schemas.conf is setup like so:
retentions = 1s:24h,15s:7d,1m:30d
From what I gather, that means that I should have 1-second precision data for the past 24 hours, 15-second data for the past 7 days, and 1-minute average for 30 days. Is this also a correct assumption and if not, could it be related to the grafana problem?
I have a "succeeded" metric that is just the timestamp. I want to see the time between successive successes (this is how long the data is stale for). I have
derivative(Success)
but I also want to know how long between the last success time and the current time. since derivative transforms xs[n] to xs[n+1] - xs[n], the "last" delta doesn't exist. How can I do this? Something like:
derivative(append(Success, now()))
I don't see any graphite functions for appending series, and I don't see any user-defined graphite functions.
The general problem is to be alerted when the data is stale, via graphite monitoring. There may be a better solution than the one I'm thinking about.
identity is a function whose value at any given time is the timestamp of that time.
keepLastValue is a function that takes a series and replicates data points forward over gaps in the data.
So then diffSeries(identity("now"), keepLastValue(Success)) will be a "sawtooth" series that climbs steadily while Success isn't updated, and jumps down to zero (or close to it — there might be some time skew) every time Success has a data point. If you use graphite monitoring to get the current value of that expression and compare it to some threshold, it will probably do what you want.
I have an Excel table which contains thousands of incident tickets. Each tickets typically carried over few hours or few days, and I usually calculate the total duration by substracting opening date and time from closing date and time.
However I would like to take into account and not count the out of office hours (night time), week-ends and holidays.
I have therefore created two additional reference tables, one which contains the non-working hours (eg everyday after 7pm until 7am in the morning, saturday and sunday all day, and list of public holidays).
Now I need to find some sort of VB macro that would automatically calculate each ticket "real duration" by removing from the total ticket time any time that would fall under that list.
I had a look around this website and other forums, however I could not find what I am looking for. If someone can help me achieve this, I would be extremely grateful.
Best regards,
Alex
You can use the NETWORKDAYS function to calculate the number of working days in the interval. Actually you seem to be perfectly set up for it: it takes start date, end date and a pointer to a range of holidays. By default it counts all days non-weekend.
For calculating the intraday time, you will need some additional magic. assuming that tickets are only opened and closed in bussines hours, it would look like this:
first_day_hrs := dayend - ticketstart
last_day_hrs := ticketend - daystart
inbeetween_hrs := (NETWORKDAYS(ticketstart, ticketend, rng_holidays) - 2) * (dayend - daystart)
total_hrs := first_day_hrs + inbetween_hrs + last_day_hrs
Of course the names should in reality refer to Excel cells. I recommend using lists and/or names.
All,
I'm looking to download stock data either from Yahoo or Google on 15 - 60 minute intervals for as much history as I can get. I've come up with a crude solution as follows:
library(RCurl)
tmp <- getURL('https://www.google.com/finance/getprices?i=900&p=1000d&f=d,o,h,l,c,v&df=cpct&q=AAPL')
tmp <- strsplit(tmp,'\n')
tmp <- tmp[[1]]
tmp <- tmp[-c(1:8)]
tmp <- strsplit(tmp,',')
tmp <- do.call('rbind',tmp)
tmp <- apply(tmp,2,as.numeric)
tmp <- tmp[-apply(tmp,1,function(x) any(is.na(x))),]
Given the amount of data I'm looking to import, I worry that this could be computationally expensive. I also don't for the life of me, understand how the time stamps are coded in Yahoo and Google.
So my question is twofold--what's a simple, elegant way to quickly ingest data for a series of stocks into R, and how do I interpret the time stamping on the Google/Yahoo files that I would be using?
I will try to answer timestamp question first. Please note this is my interpretation and I could be wrong.
Using the link in your example https://www.google.com/finance/getprices?i=900&p=1000d&f=d,o,h,l,c,v&df=cpct&q=AAPL I get following data :
EXCHANGE%3DNASDAQ
MARKET_OPEN_MINUTE=570
MARKET_CLOSE_MINUTE=960
INTERVAL=900
COLUMNS=DATE,CLOSE,HIGH,LOW,OPEN,VOLUME
DATA=
TIMEZONE_OFFSET=-300
a1357828200,528.5999,528.62,528.14,528.55,129259
1,522.63,528.72,522,528.6499,2054578
2,523.11,523.69,520.75,522.77,1422586
3,520.48,523.11,519.6501,523.09,1130409
4,518.28,520.579,517.86,520.34,1215466
5,518.8501,519.48,517.33,517.94,832100
6,518.685,520.22,518.63,518.85,565411
7,516.55,519.2,516.55,518.64,617281
...
...
Note the first value of first column a1357828200, my intuition was that this has something to do with POSIXct. Hence a quick check :
> as.POSIXct(1357828200, origin = '1970-01-01', tz='EST')
[1] "2013-01-10 14:30:00 EST"
So my intuition seems to be correct. But the time seems to be off. Now we have one more info in the data. TIMEZONE_OFFSET=-300. So if we offset our timestamps by this amount we should get :
as.POSIXct(1357828200-300*60, origin = '1970-01-01', tz='EST')
[1] "2013-01-10 09:30:00 EST"
Note that I didn't know which day data you had requested. But quick check on google finance reveals, those were indeed price levels on 10th Jan 2013.
Remaining values from first column seem to be some sort of offset from first row value.
So downloading and standardizing the data ended up being more much of a bear than I figured it would--about 150 lines of code. The problem is that while Google provides the past 50 training days of data for all exchange-traded stocks, the time stamps within the days are not standardized: an index of '1,' for example could either refer to the first of second time increment on the first trading day in the data set. Even worse, stocks that only trade at low volumes only have entries where a transaction is recorded. For a high-volume stock like APPL that's no problem, but for low-volume small caps it means that your series will be missing much if not the majority of the data. This was problematic because I need all the stock series to lie neatly on to of each other for the analysis I'm doing.
Fortunately, there is still a general structure to the data. Using this link:
https://www.google.com/finance/getprices?i=1800&p=1000d&f=d,o,h,l,c,v&df=cpct&q=AAPL
and changing the stock ticker at the end will give you the past 50 days of trading days on 1/2-hourly increment. POSIX time stamps, very helpfully decoded by #geektrader, appear in the timestamp column at 3-week intervals. Though the timestamp indexes don't invariably correspond in a convenient 1:1 manner (I almost suspect this was intentional on Google's part) there is a pattern. For example, for the half-hourly series that I looked at the first trading day of ever three-week increment uniformly has timestamp indexes running in the 1:15 neighborhood. This could be 1:13, 1:14, 2:15--it all depends on the stock. I'm not sure what the 14th and 15th entries are: I suspect they are either daily summaries or after-hours trading info. The point is that there's no consistent pattern you can bank on.The first stamp in a training day, sadly, does not always contain the opening data. Same thing for the last entry and the closing data. I found that the only way to know what actually represents the trading data is to compare the numbers to the series on Google maps. After days of futiley trying to figure out how to pry a 1:1 mapping patter from the data, I settled on a "ballpark" strategy. I scraped APPL's data (a very high-volume traded stock) and set its timestamp indexes within each trading day as the reference values for the entire market. All days had a minimum of 13 increments, corresponding to the 6.5 hour trading day, but some had 14 or 15. Where this was the case I just truncated by taking the first 13 indexes. From there I used a while loop to essentially progress through the downloaded data of each stock ticker and compare its time stamp indexes within a given training day to the APPL timestamps. I kept the overlap, gap-filled the missing data, and cut out the non-overlapping portions.
Sounds like a simple fix, but for low-volume stocks with sparse transaction data there were literally dozens of special cases that I had to bake in and lots of data to interpolate. I got some pretty bizarre results for some of these that I know are incorrect. For high-volume, mid- and large-cap stocks, however, the solution worked brilliantly: for the most part the series either synced up very neatly with the APPL data and matched their Google Finance profiles perfectly.
There's no way around the fact that this method introduces some error, and I still need to fine-tune the method for spare small-caps. That said, shifting a series by a half hour or gap-filling a single time increment introduces a very minor amount of error relative to the overall movement of the market and the stock. I am confident that this data set I have is "good enough" to allow me to get relevant answers to some questions that I have. Getting this stuff commercially costs literally thousands of dollars.
Thoughts or suggestions?
Why not loading the data from Quandl? E.g.
library(Quandl)
Quandl('YAHOO/AAPL')
Update: sorry, I have just realized that only daily data is fetched with Quandl - but I leave my answer here as Quandl is really easy to query in similar cases
For the timezone offset, try:
as.POSIXct(1357828200, origin = '1970-01-01', tz=Sys.timezone(location = TRUE))
(The tz will automatically adjust according to your location)