I am using rmarkdown to make beamer presentations in RStudio. I would want to get slide tickers on the top of presentation. Dresden theme should support those tickersDresden
So is it possible to get those tickers by using rmarkdown? When I knit pdf I get presentation without slide tickers.
Example code:
---
title: "Example"
output: beamer_presentation
theme: Dresden
---
# R Markdown
This is an R Markdown presentation. Markdown is a simple formatting syntax for authoring HTML, PDF, and MS Word documents. For more details on using R Markdown see <http://rmarkdown.rstudio.com>.
When you click the **Knit** button a document will be generated that includes both content as well as the output of any embedded R code chunks within the document.
# Slide with Bullets
- Bullet 1
- Bullet 2
- Bullet 3
# Slide with R Code and Output
```{r}
summary(cars)
```
# Slide with Plot
```{r, echo=FALSE}
plot(cars)
```
I think the slide_level option might be what you are looking for:
The slide_level option defines the heading level that defines individual slides. By default this is the highest header level in the hierarchy that is followed immediately by content, and not another header, somewhere in the document. This default can be overridden by specifying an explicit slide_level
documentation source
For example with the slide_level: 2:
---
title: "Example"
output:
beamer_presentation:
slide_level: 2
theme: Dresden
---
gives you the following output
However you need to provide a lower level of the heading for the slide title, e.g.
# R Markdown
## Description
This is an R Markdown presentation. Markdown is a simple formatting
syntax for authoring HTML, PDF, and MS Word documents. For more
details on using R Markdown see <http://rmarkdown.rstudio.com>.
When you click the **Knit** button a document will be generated that
includes both content as well as the output of any embedded R code
chunks within the document.
Edit To get the output same as in the image you have attached, you section your presentation in the following way:
---
title: "Example"
output:
beamer_presentation:
slide_level: 3
theme: Dresden
---
# Section 1
## Subsection 1
### Title A
### Title B
## Subsection 2
### Title A
## Subsection 3
### Title A
### Title B
### Title C
# Section 2
## Subsection 1
### Title A
### Title B
and the following presentation heading is generated:
Related
Create a slidy presentation using R markdown is straightforward R Markdown: The Definitive Guide. By
Yihui Xie, J. J. Allaire and Garrett Grolemund.
I try Quarto document (HTML format) to create such presentation (Multiple html page in one file), but horizontal rule (---) do not work to create a new slide/page.
Is there any way to create such presentation using Quarto?
Thanks
---
title: "Test document"
format: html
---
## Running Code
When you click the **Render** button a document will be generated that includes both content and the output of embedded code. You can embed code like this:
```{r}
1 + 1
```
---
You can add options to executable code like this
```{r}
#| echo: false
2 * 2
```
I am using rmdformats::robobook as my format for an r-markdown document. While I like the depth of the TOC for that template, I dislike the continuous scrolling. I prefer how rmdformats::material only allows you to scroll as far as the 1st level header / starts a new page for each h1 (but I dislike that I can't increase the depth of the TOC).
So, my question: Is there a simple way to modify or an argument in the yaml that would tell it to make a new page by some level of header (e.g. just h1 or h1 and h2, but not h3)? I guess similar to how the TOC and page display in R Markdown: the Definitive Guide function (I could not find that available as a template).
Reproducible code:
---
title: "tmp"
output:
rmdformats::robobook:
toc_depth: 2
toc_float:
collapsed: FALSE
use_bookdown: TRUE
---
# Section 1
`r OpenRepGrid::randomWords(250)`
## Subsection 1
`r OpenRepGrid::randomWords(250)`
### not in TOC
`r OpenRepGrid::randomWords(250)`
# Section 2
`r OpenRepGrid::randomWords(250)`
## Subsection 2
`r OpenRepGrid::randomWords(250)`
### not in TOC
`r OpenRepGrid::randomWords(250)`
I'm using R markdown to create a presentation, and I would really like to add a custom background on my opening slide and second slide. Currently, I have my potential themes on a separate PowerPoint document. Is there any way to add backgrounds like that?
Thanks!
To add a custom background, one can create a powerpoint template, e.g. my-styles.pptx where the background image is placed at the slide master.
Then create an Rmarkdown file like follows and place it in the same folder:
---
title: "Fancy Slides"
author: "Creative Author"
date: "2021-06-09"
output:
powerpoint_presentation:
reference_doc: my-styles.pptx
---
```{r setup, include=FALSE}
knitr::opts_chunk$set(echo = FALSE)
```
## Slide with Bullets
- Bullet 1
- Bullet 2
- Bullet 3
## Slide with R Output
```{r cars, echo = TRUE}
summary(cars)
```
More about this can be found in Yihui Xie et al. (2021) R Markdown: The Definitive Guide, Section 4.4.
Tested with RStudio Version 1.4.1714 and Powerpoint 2016.
I am writing a beamer presentation in rmarkdown and converting it to pdf with knitr. I want to define sections at the header1 level, e.g. # Introduction, and then have a slide titled something else e.g. ## Introducing my brilliant research. Having the header1 level define sections is nice as the names of the sections can be displayed in the slide header in certain beamer themes, and this is why I include it.
But I do not want rmarkdown to insert a slide that simply says the name of the section between sections, which at the moment it is doing. Is there a way to not print a slide with the section name between sections? I thought slide_level would control this behavior but it does not seem to (or perhaps I am using it wrong).
A minimal reproducible example of my problem can be obtained with this code:
---
title: "Test Pres"
author: "Professor Genius Researcher"
date: "24 February 2017"
output:
beamer_presentation:
slide_level: 2
theme: "Singapore"
colortheme: "rose"
---
```{r setup, include=FALSE}
knitr::opts_chunk$set(echo = FALSE)
```
# Markdown Intro
## R Markdown
This is an R Markdown presentation. Markdown is a simple formatting syntax for authoring HTML, PDF, and MS Word documents. For more details on using R Markdown see <http://rmarkdown.rstudio.com>.
When you click the **Knit** button a document will be generated that includes both content as well as the output of any embedded R code chunks within the document.
# Using Bullets
## Slide with Bullets
- Bullet 1
- Bullet 2
- Bullet 3
# Including Chunks
## Slide with R Output
```{r cars, echo = TRUE}
summary(cars)
```
## Slide with Plot
```{r pressure}
plot(pressure)
```
At the moment, this code produces slides that say Markdown Intro, Using Bullets, and Including Chunks. I would like those slides labeling the sections omitted. Is this possible?
Create a new Latex template where you remove this part from the preamble:
\AtBeginSection[]
{
....
}
Place this latex template in the same folder as your .Rmd file and refer to it in the Rmd Yaml front matter using template: mytemplate.tex as explained here.
I have a simple test .Rmd script which I am using to generate a PDF file with the rmarkdown render function.
When I set the toc to be true, the second PDF page is a blank white page and I would expect to see 'Slide With Bullets' and 'Slide with R Code and Output' to be in there.
Does anyone know how to format the slide titles so that they appear in the table of contents?
---
title: "test"
author: "test"
date: '2015-10-29'
output: beamer_presentation
toc: true
---
## Slide with Bullets
- Bullet 1
- Bullet 2
- Bullet 3
## Slide with R Code and Output
```{r}
summary(cars)
```
According to the documentation toc only works with level 1 headings. So the code below will create a table of contents to the title slide. I can't get it to work with slides that contain content though. Maybe this is how the table of contents is designed to work???
---
title: "Untitled"
output:
beamer_presentation:
toc: yes
---
# A Title Slide:
## Slide with Bullets
- Bullet 1
- Bullet 2
- Bullet 3
## Slide with R Code and Output
```{r}
summary(cars)
```