So I have 2 sets of data, each comparing a specific category, like so:
Category : Solution 1 : Solution 2
1: 5 : 6
2: 7 : 6
3: 4 : 4
4: 8 : 9
How do I calculate the difference scores using R specifically? Somehow I need to load the data them calculate solution1 - solution2 I believe.
We could 'read' the dataset using read.table/read.csv with the appropriate delimiter. Based on the example showed, it is :. After the 'data.frame' object is created ('df1'), we can use transform or within to create the 'Diff' column (i.e. the difference of the "Solution" columns
df1 <- read.table('file.txt', sep=':', strip.white=TRUE, header=TRUE)
transform(df1, Diff= Solution.1-Solution.2)
# Category Solution.1 Solution.2 Diff
#1 1 5 6 -1
#2 2 7 6 1
#3 3 4 4 0
#4 4 8 9 -1
Or
df1$Diff <- with(df1, Solution.1-Solution.2)
Related
I am currently try to use pre-defined strings in order to identify multiple column names in R.
To be more explicit, I am using the ave function to create identification variables for subgroups of a dataframe. The twist is that I want the identification variables to be flexible, in such a manner that I would just pass it as a generic string.
A sample code would be:
ids = with(df,ave(rep(1,nrow(df)),subcolumn1,subcolumn2,subcolumn3,FUN=seq_along))
I would like to run this code in the following fashion (code below does not work as expected):
subColumnsString = c("subcolumn1","subcolumn2","subcolumn3")
ids = with(df,ave(rep(1,nrow(df)),subColumnsString ,FUN=seq_along))
I tried something with eval, but still did not work:
subColumnsString = c("subcolumn1","subcolumn2","subcolumn3")
ids = with(df,ave(rep(1,nrow(df)),eval(parse(text=subColumnsString)),FUN=seq_along))
Any ideas?
Thanks.
EDIT: Working code example of what I want:
df = mtcars
id_names = c("vs","am")
idDF_correct = transform(df,idItem = as.numeric(interaction(vs,am)))
idDF_wrong = cbind(df,ave(rep(1,nrow(df)),df[id_names],FUN=seq_along))
Note how in idDF_correct, the unique combinations are correctly mapped into unique values of idItem. In idDF_wrong this is not the case.
I think this achieves what you requested. Here I use the mtcars dataset that ships with R:
subColumnsString <- c("cyl","gear")
ids = with(mtcars, ave(rep(1,nrow(mtcars)), mtcars[subColumnsString], FUN=seq_along))
Just index your data.frame using the sub columns which returns a list that naturally works with ave
EDIT
ids = ave(rep(1,nrow(mtcars)), mtcars[subColumnsString], FUN=seq_along)
You can omit the with and just call plain 'ol ave, as G. Grothendieck, stated and you should also use their answer as it is much more general.
This defines a function whose arguments are:
data, the input data frame
by, a character vector of column names in data
fun, a function to use in ave
Code--
Ave <- function(data, by, fun = seq_along) {
do.call(function(...) ave(rep(1, nrow(data)), ..., FUN = fun), data[by])
}
# test
Ave(CO2, c("Plant", "Treatment"), seq_along)
giving:
[1] 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3
[39] 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6 7 1 2 3 4 5 6
[77] 7 1 2 3 4 5 6 7
Hi I am aggregating values from two columns and creating a final third column, based on priorities. If values in column 1 are missing or are NA then I go for column 2.
df=data.frame(internal=c(1,5,"",6,"NA"),external=c("",6,8,9,10))
df
internal external
1 1
2 5 6
3 8
4 6 9
5 NA 10
df$final <- df$internal
df$final <- ifelse((df$final=="" | df$final=="NA"),df$external,df$final)
df
internal external final
1 1 2
2 5 6 3
3 8 4
4 6 9 4
5 NA 10 2
How can I get final value as 4 and 2 for row 3 and row 5 when the external is 8 and 2. I don't know what's wrong but these values don't make any sense to me.
The issue arises because R converts your values to factors.
Your code will work fine with
df=data.frame(internal=c(1,5,"",6,"NA"),external=c("",6,8,9,10),stringsAsFactors = FALSE)
PS: this hideous conversion to factors should definitely belong to the R Inferno, http://www.burns-stat.com/pages/Tutor/R_inferno.pdf
I would like to get a data frame that contains only data that is within 2 SD per each numeric column.
I know how to do it for a single column but how can I do it for a bunch of columns at once?
Here is the toy data frame:
df <- read.table(text = "target birds wolfs Country
3 21 7 a
3 8 4 b
1 2 8 c
1 2 3 a
1 8 3 a
6 1 2 a
6 7 1 b
6 1 5 c",header = TRUE)
Here is the code line for getting only the data that is under 2 SD for a single column(birds).How can I do it for all numeric columns at once?
df[!(abs(df$birds - mean(df$birds))/sd(df$birds)) > 2,]
target birds wolfs Country
2 3 8 4 b
3 1 2 8 c
4 1 2 3 a
5 1 8 3 a
6 6 1 2 a
7 6 7 1 b
8 6 1 5 c
We can use lapply to loop over the dataset columns and subset the numeric vectors (by using a if/else condition) based on the mean and sd.
lapply(df, function(x) if(is.numeric(x)) x[!(abs((x-mean(x))/sd(x))>2)] else x)
EDIT:
I was under the impression that we need to remove the outliers for each column separately. But, if we need to keep only the rows that have no outliers for the numeric columns, we can loop through the columns with lapply as before, instead of returning 'x', we return the sequence of 'x' and then get the intersect of the list element with Reduce. The numeric index can be used for subsetting the rows.
lst <- lapply(df, function(x) if(is.numeric(x))
seq_along(x)[!(abs((x-mean(x))/sd(x))>2)] else seq_along(x))
df[Reduce(intersect,lst),]
I'm guessing that you are trying to filter your data set by checking that all of the numeric columns are within 2 SD (?)
In that case I would suggest to create two filters. 1 one that will indicate numeric columns, the second one that will check that all of them within 2 SD. For the second condition, we can use the built in scale function
indx <- sapply(df, is.numeric)
indx2 <- rowSums(abs(scale(df[indx])) <= 2) == sum(indx)
df[indx2,]
# target birds wolfs Country
# 2 3 8 4 b
# 3 1 2 8 c
# 4 1 2 3 a
# 5 1 8 3 a
# 6 6 1 2 a
# 7 6 7 1 b
# 8 6 1 5 c
Here is the data.
set.seed(23) data<-data.frame(ID=rep(1:12), group=rep(1:3,times=4), value=(rnorm(12,mean=0.5, sd=0.3)))
ID group value
1 1 1 0.4133934
2 2 2 0.6444651
3 3 3 0.1350871
4 4 1 0.5924411
5 5 2 0.3439465
6 6 3 0.3673059
7 7 1 0.3202062
8 8 2 0.8883733
9 9 3 0.7506174
10 10 1 0.3301955
11 11 2 0.7365258
12 12 3 0.1502212
I want to get z-standardized scores within each group. so I try
library(weights)
data_split<-split(data, data$group) #split the dataframe
stan<-lapply(data_split, function(x) stdz(x$value)) #compute z-scores within group
However, It looks wrong because I want to add a new variable following 'value'
How can I do that? Kindly provide some suggestions(sample code). Any help is greatly appreciated .
Use this instead:
within(data, stan <- ave(value, group, FUN=stdz))
No need to call split nor lapply.
One way using data.table package:
library(data.table)
library(weights)
set.seed(23)
data <- data.table(ID=rep(1:12), group=rep(1:3,times=4), value=(rnorm(12,mean=0.5, sd=0.3)))
setkey(data, ID)
dataNew <- data[, list(ID, stan = stdz(value)), by = 'group']
the result is:
group ID stan
1: 1 1 -0.6159312
2: 1 4 0.9538398
3: 1 7 -1.0782747
4: 1 10 0.7403661
5: 2 2 -1.2683237
6: 2 5 0.7839781
7: 2 8 0.8163844
8: 2 11 -0.3320388
9: 3 3 0.6698418
10: 3 6 0.8674548
11: 3 9 -0.2131335
12: 3 12 -1.3241632
I tried Ferdinand.Kraft's solution but it didn't work for me. I think the stdz function isn't included in the basic R install. Moreover, the within part troubled me in a large dataset with many variables. I think the easiest way is:
data$value.s <- ave(data$value, data$group, FUN=scale)
Add the new column while in your function, and have the function return the whole data frame.
stanL<-lapply(data_split, function(x) {
x$stan <- stdz(x$value)
x
})
stan <- do.call(rbind, stanL)
I am trying to clean some data and would like to replace zeros with values from the previous date. I was hoping the following code works but it doesn't
temp = c(1,2,4,5,0,0,6,7)
temp[which(temp==0)]=temp[which(temp==0)-1]
returns
1 2 4 5 5 0 6 7
instead of
1 2 4 5 5 5 6 7
Which I was hoping for.
Is there a nice way of doing this without looping?
The operation is called "Last Observation Carried Forward" and usually used to fill data gaps. It's a common operation for time series and thus implemented in package zoo:
temp = c(1,2,4,5,0,0,6,7)
temp[temp==0] <- NA
library(zoo)
na.locf(temp)
#[1] 1 2 4 5 5 5 6 7
You could use essentially your same logic except you'll want to apply it to the values vector that results from using rle
temp = c(1,2,4,5,0,0,6,0)
o <- rle(temp)
o$values[o$values == 0] <- o$values[which(o$values == 0) - 1]
inverse.rle(o)
#[1] 1 2 4 5 5 5 6 6