I don't know how to explain it better: I'm using Visual Studio Code, Nuxt and Axios, and whenever I refresh my app in the browser I get all the content of my axios call printed in the vsc terminal.
I think I may have made some changes in the google inspector but I'm not sure.
Nothing strange here, Nuxt is running on both client side and server side. Here, you have a console.log probably called in a context when both are available.
On top of that, the initial request is always coming from the server hence why you can see it in your terminal.
Similar to a Node.js app, the output of your console.log is on the "backend" aka you terminal here.
I have a strange issue. I build my Meteor app and run it on android device using -
meteor run android-device --mobile-server=<my_aws_ip>:3000
When the app deploys immediately it connects to the server (and my javascripts etc works). After a few seconds, the page refreshs and none of the javascript callbacks work. Please help me debug this issue.
More information: If I change the client (and not the server), and deploy it, for the first few seconds, the changed client gets shown on the phone. After the first few seconds, the version which is present on the server is shown. So I think Cordova or Meteor is trying to fetch the client code from the server, which is breaking the app. Is there a way to prevent this behavior?
Even more data points -
My aws code does NOT have android and ios platforms installed. Because of this, I think the cordova plugins are not installed, causing a JS break somewhere.
Easiest fix I can think of is remove cordova autoupdate. This is being added by meteor-platform package. If I clone meteor-platform and comment out the cordova autoupdate, the app doesn't load.
Is there another way of removing autoupdate?
This sounds like you have a different version of your app deployed at the mobile-server address.
The local code is run in development mode. Your AWS one is likely in production mode (and may contain a syntax error).
When you run your app it sees the code is different and fetches the new/old (different) version with a hot code reload - hence the page refresh/flash.
To fix this, you need to find the syntax error in your code. It's best to view the ADB logger or run with meteor run --verbose android-device ....
This will provide a bit more information such as an Uncaught exception: cannot read .. of null error type error.
It's hard to say what the error is. The error prevents the rest of your code from executing. In production mode the entire project is one JS file. If there is an error of any kind half way along the file, the rest of the file will not execute.
Also, try loading <my_aws_ip>:3000 in your browser and watch for JS errors in the JS console.
You can also run it locally with --production to simulate a production build environment locally.
Enabling autoupdate but without a page refresh:
Reload._reload = function (options) {
console.log("Next load will load new version");
};
I have created my first meteor app today and am kind of stuck. Everything works extremely well on localhost:3000, very responsive etc. It is a simple task app, where users can post tasks to a feed that displays all tasks an then claim those tasks, removing them from the general feed and putting them into their personal feed. But when I deploy it to a meteor.com server, everything breaks.
This is the js file
https://github.com/valentin-zambelli/brokenjs/blob/master/mvp.js
Accounts.ui.config({
passwordSignupFields: "USERNAME_ONLY"
});
gets ignored and whenever I try to post a new task the page reloads, getting stuck on app.meteor.com/?text=some+new+task and doesnt display the task in the general taskfeed.
I have removed the insecure and autopublish package. Is there anything I am missing here? It kind of seems as if it uses an older, broken build. I also get the ReferenceError: Can't find variable: require when deploying, but I can't really figure out where this is coming from.
I hope someone can help me.
Ok, it was an insanely stupid mistake on my part: The mongodb was still in an older state and caused a conflict. If you have problems deploying your meteor app try
meteor deploy myapp.meteor.com -- delete
This will delete all resources on the server, including the database. Then do a simple
meteor deploy myapp.meteor.com
Doing client-side code is easy because there's the Chrome developer console and I can run meteor commands on it, check objects, check collections, and do practically anything.
I just began doing some Meteor server-side code and I feel like I'm coding in the dark. So far I've just been wrapping everything into a Meteor Method that I can call from the front end, and I watch the meteor command line window to see what console logs.
Are there better ways to do this?
You can hook up node-inspector to your Meteor server as you would any normal Node app, but you won't be able to inspect objects in the process without pausing it. This is due to a limitation in node-inspector - Chrome injects some custom code into the Javascript engine so that inspections can happen as part of the event loop.
For more information, see the following question. The creator of node-inspector offered to help implement this functionality for anyone who was interested:
Can node-inspector debug an app without pausing it?
Does anyone know a good method to debug server side code?
I tried enable Node.js debug then use node-inspector but it does not show any of my code.
I end up using console.log but this is very inefficient.
Update: I found the following procedure works on my Linux machine:
When you run Meteor, it will spawn two processes
process1: /usr/lib/meteor/bin/node /usr/lib/meteor/app/meteor/meteor.js
process2: /usr/lib/meteor/bin/node /home/paul/codes/bbtest_code/bbtest02/.meteor/local/build/main.js --keepalive
You need to send kill -s USR1 on process2
Run node-inspector and you can see your server code
On my first try, I modify the last line on meteor startup script in /usr/lib/meteor/bin/meteor to
exec "$DEV_BUNDLE/bin/node" $NODE_DEBUG "$METEOR" "$#"
and run NODE_DEBUG=--debug meteor on command prompt. This only put --debug flag on process1 so I only see meteor files on node-inspector and could not find my code.
Can someone check this on Windows and Mac machine?
In Meteor 0.5.4 this has become a lot easier:
First run the following commands from the terminal:
npm install -g node-inspector
node-inspector &
export NODE_OPTIONS='--debug-brk'
meteor
And then open http://localhost:8080 in your browser to view the node-inspector console.
Update
Since Meteor 1.0 you can just type
meteor debug
which is essentially a shortcut for the above commands, and then launch node inspector in your browser as mentioned.
Update
In Meteor 1.0.2 a console or shell has been added. It may come in handy to output variables and run commands on the server:
meteor shell
Meteor apps are Node.js apps. When running a Meteor app with the meteor [run] command, you can configure the NODE_OPTIONS environment variable to start node in debug mode.
Examples of NODE_OPTIONS environment variable values:
--debug
--debug=47977 - specify a port
--debug-brk - break on the first statement
--debug-brk=5858 - specify a port and break on the first statement
If you export NODE_OPTIONS=--debug, all meteor command run from the same shell will inherit the environment variable. Alternatively, you can enable debugging just for one run, with NODE_OPTIONS="--debug=47977" meteor.
To debug, run node-inspector in a different shell, then go to http://localhost:8080/debug?port=<the port you specified in NODE_OPTIONS>, regardless of what node-inspector tells you to run.
To start node.js in debug mode, I did it this way:
open /usr/lib/meteor/app/meteor/run.js
before
nodeOptions.push(path.join(options.bundlePath, 'main.js'));
add
nodeOptions.push('--debug');
Here are additional practical steps for your to attach debugger eclipse:
use '--debug-brk' instead of '--debug' here, because it's easier for me to attach node.js using eclipse as debugger.
add 'debugger;' in the code where you want to debug.(I prefer this way personally)
run meteor in console
attach to node.js in eclipse(V8 tools, attach to localhost:5858)
run, wait for debugger to be hit
when you start meteor in your meteor app folder, you'll see that "debugger listening on port 5858" in console.
On Meteor 1.0.3.1 (update to Sergey.Simonchik answer)
Start your server with meteor run --debug-port=<port-number>
Point browser to http://localhost:6222/debug?port=<port-number>
Where <port-number> is a port you specify.
In your code add a debugger; where you want to set your break point.
Depending on where debugger; is invoked, it will either break on your client or server browser window with inspector opened.
I like to set breakpoints via a GUI. This way I don't have to remember to remove any debugging code from my app.
This is how I managed to do it server side for my local meteor app:
meteor debug
start your app this way.
Open Chrome to the address it gives you. You MAY need to install https://github.com/node-inspector/node-inspector (it might come bundled with Meteor now? not sure)
You'll see some weird internal meteor code (not the app code you wrote). Press play to run the code. This code simply starts up your server to listen for connections.
Only after you press play you'll see a new directory in your debugger folder structure called "app". In there are your meteor project files. Set a breakpoint in there one the line you want.
Open the local address of your app. This will run your server side code and you you should be able to hit your breakpoint!
Note: you have to reopen the inspector and go through this process again each time your app restarts!
As of Meteor 1.0.2 probably the best way for server-side debugging is directly via the new built-in shell: with running server run meteor shell. More info here: https://www.meteor.com/blog/2014/12/19/meteor-102-meteor-shell
I am not sure why it was not working for you.
I am able to use it by following steps on console (Mac).
$ ps
$ kill -s USR1 *meteor_node_process_id*
$ node-inspector &
Above steps are mentioned on https://github.com/dannycoates/node-inspector. It is for attaching node-inspector to running node process.
I wrote a small meteor package called meteor-inspector which simplifies the use of node-inspector to debug meteor apps. It internally manages the lifecycle of node-inspector and hence, the user does not need to restart the debugger manually after some files have changed.
For more details and concrete usage instructions take a look at https://github.com/broth-eu/meteor-inspector.
for meteor 1.3.5.2, run
meteor debug --debug-port 5858+n
n is a non-zero number, this will cause node-inspector use 8080+n as web port.
WebStorm, the powerful IDE free for open source developers, makes it much easier to debug server-side.
I've tested it on Windows, and the configuration was painless - see my answer.
A inspector that solve my issues is meteor server console. Here is the process I followed to install it:
In your project folder, add the smart package server-eval:
mrt add server-eval
For Meteor 1.0:
meteor add gandev:server-eval
Restart meteor.
Download crx Chrome extension file from here.
Open extensions page in Chrome and drag crx file to extensions page.
Restart Chrome.
Check the web inspector out to eval server side code:
In comparison with node-inspector, I have a clearer output.
If you prefer to use nodeJS' official debugger you can call NODE_OPTIONS='--debug' meteor and then (on a different shell) node debug localhost:5858.