After upgrading to OS X 10.10 Yosemite I started to receive the following error log when running my Rcmdr package in R using library(Rcmdr):
Error : .onLoad failed in loadNamespace() for 'tcltk', details:
call: dyn.load(file, DLLpath = DLLpath, ...)
error: unable to load shared object '/Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so':
dlopen(/Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so, 10): Library not loaded: /usr/X11/lib/libXft.2.dylib
Referenced from: /usr/local/lib/libtk8.6.dylib
Reason: image not found
Error: package or namespace load failed for 'Rcmdr'
Could you help me understand how to fix it?
This mac os x troubleshooting didn't help.
Execute the following in a terminal window:
locate libXft.2.dylib
or do it from an R console:
system("locate libXft.2.dylib")
On my Yosemite install it's in /opt/X11/lib/libXft.2.dylib.
If your setup is similar, then:
sudo ln -s /opt/X11 /usr/X11
should help fix this temporarily, but I'd keep looking for a Yosemite R package (since that will accommodate all the changes Apple made to the filesystem structure).
Of note: On my work Mac (Mavericks) this symlink is already there.
Reinstalling XQuartz worked for me.
I added a symlink from /usr/X11 to /opt/X11 and this resolved the problem without the locate command.
Related
Here's the error I get:
> library(rJava)
Error: package or namespace load failed for ‘rJava’:
.onLoad failed in loadNamespace() for 'rJava', details:
call: dyn.load(file, DLLpath = DLLpath, ...)
error: unable to load shared object '/Library/Frameworks/R.framework/Versions/3.4/Resources/library/rJava/libs/rJava.so':
dlopen(/Library/Frameworks/R.framework/Versions/3.4/Resources/library/rJava/libs/rJava.so, 6): Library not loaded: #rpath/libjvm.dylib
Referenced from: /Library/Frameworks/R.framework/Versions/3.4/Resources/library/rJava/libs/rJava.so
Reason: image not found
I see this is by no means a unique problem.. I've tried the solutions here, here and here. No success.
Some more details: I'm using R GUI, but I also can't load rJava through R terminal. I also didn't have any issue with rJava on R 3.3.s
You have two options here:
get older release of R and use precompiled version of rJava
get rJava sources and compile it for yourself
Note that rJava (most recent sources) require some features that are not embedded inside XCode and clang that is available via AppStore. You will need to do some low level stuff when it comes to building rJava package.
You can find detailed instruction here: http://www.owsiak.org/r-3-4-rjava-macos-and-even-more-mess/
If you decide to use older release of R, it's still a struggle to get it working, but way less to do: http://www.owsiak.org/r-java-rjava-and-macos-adventures/
JAVA_HOME path is different for different version of MAC OS.
In some cases there is /jre folder and in some cases it is not after /Home director manually go towards /server folder with CD command in terminal and using pwd copy the entire path use that to set the java.home then you can easily load rJava library. This is how I was able to fix the issue
options("java.home"="/Library/Java/JavaVirtualMachines/jdk-9.0.1.jdk/Contents/Home/lib")
Sys.setenv(LD_LIBRARY_PATH='$JAVA_HOME/server')
dyn.load('/Library/Java/JavaVirtualMachines/jdk-9.0.1.jdk/Contents/Home/lib/server/libjvm.dylib')
library(rJava)
I run RStudio Server on ubuntu 14.04. When trying to install the rgdal package I get the following error message:
Error in dyn.load(file, DLLpath = DLLpath, ...) :
unable to load shared object '/home/admin2/R/x86_64-pc-linux-gnu- library/2.14/rgdal/libs/rgdal.so':
libnetcdf.so.6: cannot open shared object file: No such file or directory
Error: loading failed
Execution halted
I upgraded RStudio Server, R-Core and all Ubuntu packages to their latest versions but no success. I also tried apt-get install lib32stdc++6 as suggested here, but also no changes. I think it is a problem specific to GDAL and the indexing of shared libraries in unix. Can anyone help please?
Ok I got it done removing Gdal completly, compiling it from source again and setting library paths correctly as described here. Later adding /usr/local/lib/ to /etc/ld.so.conf and run sudo ldconfig as described here.
I am facing issues while installing the kernlab R package on CentOS using the following command:
install.packages("/home/R_Libraries/kernlab_0.9-20.tar.gz", repos = NULL, type="source")
I get the following error:
Error in dyn.load(file, DLLpath = DLLpath, ...) :
unable to load shared object '/opt/vertica/R/library/kernlab/libs/kernlab.so':
libgfortran.so.3: wrong ELF class: ELFCLASS32
gfortran is installed as confirmed by the following command:
ldconfig -v|grep fortran
libgfortran.so.1 -> libgfortran.so.1.0.0
Can someone help with fixing this issue?
This error:
libgfortran.so.3: wrong ELF class: ELFCLASS32
means that you've tried to load 32-bit libgfortran into a 64-bit program.
Unfortunately you didn't tell us anything that would allow us to help you. Not even where this libgfortran is coming from.
You should make sure that a 64-bit libgfortran is installed in the system location, and the above error would go away.
After upgrading to OS X 10.10 Yosemite I started to receive the following error log when running my Rcmdr package in R using library(Rcmdr):
Error : .onLoad failed in loadNamespace() for 'tcltk', details:
call: dyn.load(file, DLLpath = DLLpath, ...)
error: unable to load shared object '/Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so':
dlopen(/Library/Frameworks/R.framework/Versions/3.1/Resources/library/tcltk/libs/tcltk.so, 10): Library not loaded: /usr/X11/lib/libXft.2.dylib
Referenced from: /usr/local/lib/libtk8.6.dylib
Reason: image not found
Error: package or namespace load failed for 'Rcmdr'
Could you help me understand how to fix it?
This mac os x troubleshooting didn't help.
Execute the following in a terminal window:
locate libXft.2.dylib
or do it from an R console:
system("locate libXft.2.dylib")
On my Yosemite install it's in /opt/X11/lib/libXft.2.dylib.
If your setup is similar, then:
sudo ln -s /opt/X11 /usr/X11
should help fix this temporarily, but I'd keep looking for a Yosemite R package (since that will accommodate all the changes Apple made to the filesystem structure).
Of note: On my work Mac (Mavericks) this symlink is already there.
Reinstalling XQuartz worked for me.
I added a symlink from /usr/X11 to /opt/X11 and this resolved the problem without the locate command.
I am having issues getting rjags the R package for R to call JAGS (Just Another Gibbs Sampler http://www-ice.iarc.fr/~martyn/software/jags/ ).
I am running Mac Os X. 10.5.8 Leopard and using R64 2.12.1. I compiled JAGS from the command line. Then I installed rjags in the R command line.
install.packages(rjags)
When I try to call rjags within R, I get the following error.
> library(rjags)
Error : .onLoad failed in loadNamespace() for 'rjags', details:
call: dyn.load(file, DLLpath = DLLpath, ...)
error: unable to load shared object '/Library/Frameworks/R.framework/Versions/2.12/Resources /library/rjags/libs/x86_64/rjags.so':
dlopen(/Library/Frameworks/R.framework/Versions/2.12/Resources/library/rjags/libs/x86_64/rjags.so, 10): Library not loaded: /usr/local/lib/libjags.2.dylib
Referenced from: /Library/Frameworks/R.framework/Versions/2.12/Resources/library/rjags/libs/x86_64/rjags.so
Reason: no suitable image found. Did find:
/usr/local/lib/libjags.2.dylib: mach-o, but wrong architecture
/usr/local/lib/libjags.2.dylib: mach-o, but wrong architecture
Error: package/namespace load failed for 'rjags'
I am guessing there is some issue with rjags referencing an unknown file in the library, but I am not sure. I am a fairly novice at the command line and messing around with directories, so any help would be much appreciated.
I found (after downloading and installing the dmg from SourceForge) that the following commands worked for me:
wget http://cran.r-project.org/src/contrib/rjags_2.2.0-4.tar.gz
wget http://cran.r-project.org/src/contrib/R2jags_0.02-15.tar.gz
sudo R --with-jags-modules=/usr/local/lib/JAGS/modules-2.2.0 CMD INSTALL rjags_2.2.0-4.tar.gz
sudo R --with-jags-modules=/usr/local/lib/JAGS/modules-2.2.0 CMD INSTALL R2jags_0.02-15.tar.gz
sudo R --with-jags-modules=/usr/local/lib/JAGS/modules-2.2.0 --arch=i386 CMD INSTALL rjags_2.2.0-4.tar.gz
sudo R --with-jags-modules=/usr/local/lib/JAGS/modules-2.2.0 --arch=x86_64 CMD INSTALL rjags_2.2.0-4.tar.gz
They certainly aren't all necessary, but they were sufficient!
I had the same problem while running Rstudio 0.97.237 and R 2.15.2. The issue had something to do with JAGS.
The fix: Update to JAGS 3-3 by downloading and installing it from here.
I encountered the error: unable to load shared object '/Library/Frameworks/R.framework/Resources/modules//R_X11.so': on my Mac and DuckDuckGo led me to this post. I was using R from the command line, so I can't speak to how it works with RStudio although I'm pretty sure it's the fix for that too. I updated JAGS from the SourceForge link provided in another answer. I can at least verify that it worked for me, though the developer was unsigned (I needed to ignore a MacOS warning during the installation procedure).