I want to plot my graph that connects a few point using 'linespoints'
I also want a label against each of the plotted point marking the coordinate of the plotted point. If possible draw a line along x and y axis marking the coordinates of the plotted points.
Any help?
You can use the with vectors option to draw arrows from column 1 & 2 with the length given in column 3 & 4. The nohead removes the arrow tips. And with labels you can place a string given as third column. The left causes left aligned text (i.e. right of the coordinates), and the offset moves the text one character width to the right.
plot "data.csv" u 1:2 with linespoints, \
'' u 1:2:(0):(-$2) with vectors, \
'' u 1:2:(-$1):(0) with vectors nohead, \
'' u 1:2:(sprintf("x=%.1f; y=%.1f", $1, $2)) with labels left offset 1, 0
Related
I want to draw several vectors in a 3D plot. The co-ordinates of the start and end point are columns in a data file. In 2D, I plot vectors by:
plot 'data.dat' u 1:2:($3-$1):($4-$2) with vectors
How can I do it in 3D?
Edit
I am trying to draw these vectors on top of a surface. When I try this:
set hidden3d
set xlabel "x"
set ylabel "y"
set zlabel "z"
set dgrid3d 10,10 qnorm 2
file = "surface.dat"
splot file u 1:2:3 with lines, file 1:2:3:($4-$1):($5-$2):($6-$3) with vectors
I get the surface, but not the vectors. (The vectors are out of the plane of the surface, like normals.)
Have you done any search at all? Have you checked the gnuplot homepage or gnuplot documentation?
From help vectors:
`The 2D vectors style draws a vector from (x,y) to (x+xdelta,y+ydelta). The 3D vectors style is similar, but requires six columns of basic data. In both cases, an additional input column (5th in 2D, 7th in 3D) may be used to provide variable (per-datapoint) color information. (see linecolor and rgbcolor variable). A small arrowhead is drawn at the end of each vector.
4 columns: x y xdelta ydelta
6 columns: x y z xdelta ydelta zdelta
... and further down...
Example:
plot 'file.dat' using 1:2:3:4 with vectors head filled lt 2
splot 'file.dat' using 1:2:3:(1):(1):(1) with vectors filled head lw 2
Hence, depending on your columns:
splot 'data.dat' u 1:2:3:($4-$1):($5-$2):($6-$3) with vectors
I tried to plot graph using the pointinterval command and I would like the 1st point of my data to be plotted which is not the case for the hot side of my first plot. Indeed we see the purple dashed line but no point at the bottom left corner (around y+=0.35).
My code involves for loop and is displayed below:
plot for [i=1:words(FILES)] myDataFile(i) u (column(1)):(column(6)/word(UTAUS_ch,i)) w lp pointinterval 2 pt myPointtype(i) ps myPointsize(i) dt myDashtype(i) lt myLinetype(i) lw myLinewidth(i) lc rgb myLinecolor(i) title myTitle(i)
If I plot with pointinterval 1 we see that those points exist (see picture below).
How can I force the first point to be plotted with pointinterval?
Is that possible to plot half of my points every 2 points and the other part every 2 points but with an offset of 1 point?
I do not think you will be able to do what you want using the pointinterval property. It is designed so that the offset of the initial point increases by one for each plot drawn, with the intention of reducing the chance that point symbols from successive plots will overlap. This is exactly opposite to what you are trying to do.
Therefore I suggest not plotting each dataset with linespoints pi N. Instead plot each dataset twice, once with lines and once with points using a filter in the using specifier like this:
plot FOO using 1:2 with lines, '' using ((int($0)%N) ? NaN : $1) : 2 with points
The filter (int($0)%N ? NaN : $1) suppresses all points whose line number is not evenly divisible by N. This is essentially what the pointinterval property does, except that pointinterval skips out-of-range points and otherwise unplottable points rather than strictly using the line number as an index.
Edit If individual offset values are required because x-coordinates are not consistent:
array offset[N] = [1,1,2,-1, and so on]
plot for [i=1:N] \
MyDataFile(i) using 1:2 with lines, \
'' using (((int($0)+offset[i] % N) ? NaN : $1) : 2 with points
I have these example-data saved in test.txt
1 2
2 3
3 5
4 5
5 6
I can easily plot them by
plot "test.txt" u 0:1,"" u 0:2
the result is
just the data plotted
but what i want is some lines between the datapoints to illustrate the difference and which points belong to the same x-value. (photoshopped scribble below)
same image with lines between datapoints
Is there any way i could achieve this with gnuplot?
Use the vectors style
plot "test.txt" u 0:1,"" u 0:2, "" u 0:1:(0):($2-$1) with vectors nohead
The vectors style expects 4 values which are the x and y coordinates, the x change (0 in this case), and the y change (the difference between your 2 columns). The nohead option removes the arrow head that is normally added.
You can style the vector using most line style specifications, and if necessary, can adjust coordinates to add some spacing. For example, setting the lines black and padding the lines by 0.1 in both directions by
plot "test.txt" u 0:1, "" u 0:2, "" u 0:($1+0.1):(0):($2-$1-0.2) with vectors nohead lc "black"
gives
I manually set ranges with set xrange and set yrange to match your images, as mine was using slightly different defaults.
See help vectors for more information on the vectors style.
I want to create a streamline like arrow lines in Gnuplot,I already have the data points that I needed, so I think my problem is not the same as this post says and different from this post because I have already obtain the data needed for stramlines.
What I have done is like this:
So the red lines are vectors show flow field and green line is streamlines to guide the readers the direction of the flux. And all the large blue arrows are my aim to be plotted in GNUPLOT. I have kown how to plot middle arrows as this post has shown but what code I need to do if I want to plot more arrows along the lines?
To be more detailed, How can I plot like this:
I supply my data file here :
velocity.txt is for vector flow field data as "index,X,Y,vx,vy,particle-numbers"
line.txt is for streamline data as "X,Y"
and My gnu file is bleow:
set terminal postscript eps size 108,16 enhanced font "Arial-Bold,100"
set output 'vector.eps'
unset key
set tics
set colorbox
set border 0
set xtics 2
#set xlabel 'x'
#set ylabel 'y'
set xrange [0:108]
set yrange [0:16]
#set cbrange [0:40]
set nolabel
set style line 4 lt 2 lc rgb "green" lw 2
plot 'velcoity.txt' u 2:3:(250*$4):(250*$5) with vectors lc 1,'line.txt' u 1:2 ls 4
Thank you!
To plot arrows along a line you can again use the vectors plotting style like you do already for the stream field.
But to get a proper plot you must consider several points:
Usually gnuplot limits the size of the arrow heads to a fraction of the arrow length. So, if you want to plot a continuous line with arrows heads, the arrows themselves should have a very short length. To avoid downscaling of the arrow heads, use the size ... fixed option, which is available only since version 5.0
You have only the trajectory, x and y values, of the line. To extract the arrow direction, the simplest approach would be to use the difference between two neighbouring points (or at a distance of two or three points).
You can extract these differences in the using statement. As pseudo code, one could do the following:
if rownumber modulo 10 == 0:
save x and y values
else if rownumber modulo 10 == 1:
draw arrow from previous point to current point, only with a head
else
ignore the point.
Putting this pseudo-code in the using statement gives the following:
ev = 10
avg = 1
sc = 0.1
plot 'line.txt' u (prev_x = (int($0)%ev == 0 ? $1 : prev_x), prev_y = (int($0)%ev == 0 ? $2 : prev_y), int($0)%ev == avg ? $1 : 1/0):2:(sc*(prev_x-$1)):(sc*(prev_y-$2)) w vectors backhead size 2,20,90 fixed ls 4
To make things more flexible, I introduced some variables: ev tells you the difference count between two arrows heads, avg the distance between two points used to calculate the arrow direction, and sc the length of the arrow shaft.
As further improvement you can use the length of the stream field arrows to colour the stream field vectors. This gives the following script
reset
unset key
set tics
set colorbox
set border 0
set xtics 2
set autoscale xfix
set autoscale yfix
set autoscale cbfix
set style line 4 lt 2 lc rgb "green" lw 2
ev=30
avg=3
sc=0.1
field_scale=500
plot 'velcoity.txt' u 2:3:(field_scale*$4):(field_scale*$5):(sqrt($4**2+$5**2)) with vectors size 1,15,45 noborder lc palette,\
'line.txt' u 1:2 ls 4 w l,\
'' u (prev_x = (int($0)%ev == 0 ? $1 : prev_x), prev_y = (int($0)%ev == 0 ? $2 : prev_y), int($0)%ev == avg ? $1 : 1/0):2:(sc*(prev_x-$1)):(sc*(prev_y-$2)) w vectors backhead size 2,20,90 fixed ls 4
With the result (qt terminal):
I have a file of points (x, y) that I plot using gnuplot. If I have another file that shows which point is linked with which other point by an edge (e.g. (3.8, 6) linked to (4,7)), is it possible to visualise/plot this edges between points ?
depending on how your data is organized, you may want to look into plotting with vectors.
For example, if your datafile looks like:
#x1 y1 x2 y2
1 1 3 3
You can plot this using:
set style arrow 1 nohead
plot "my_arrows.dat" using 1:2:($3-$1):($4-$2) with vectors arrowstyle 1
EDIT
Assuming all the points in your datafile are repeated, you can do the following:
set style arrow 1 nohead
plot "my_arrows.dat" using 1:2:($3-$1):($4-$2) with vectors arrowstyle 1,\
"my_arrows.dat" using 1:2 w points
If they're not repeated, you can do:
set style arrow 1 nohead
plot "my_arrows.dat" using 1:2:($3-$1):($4-$2) with vectors arrowstyle 1,\
"my_arrows.dat" using 1:2 w points ls 1 lc rgb "red" pt 1,\
"my_arrows.dat" using 3:4 w points ls 1 lc rgb "red" pt 1
Note that you can play around with the linestyles (linecolor or lc, pointtype or pt, linewidth or lw etc. to make the points appear the same.)
You might not be able to read the line positions in without using a separate utility to generate your plotscript, but the command to draw a line from point to point is
set arrow [X] from first x1,y1 to first x2,y2 nohead
where X is an optional tag number for the arrow, and (x1,y1) and (x2,y2) are points in the graph's coordinate system.