If the session is stored in proc
The user logs in, closes the browser directly and reopens it after an hour. Would he need to log in again?
If the web application uses cookies and cookies are enabled on the users browser...
If the web application uses persistent cookies and cookies are enabled on the users browser...
If the web application uses cookies and cookies are disabled on the users browser...
If the web application uses persistent cookies and cookies are disabled on the users browser...
If session is stored in state server and situations are the same, then what would happen?
When a session is created (assuming it is a normal session), a cookie is sent to the browser that looks something like this:
SESSION_ID=437b930db84b8079c2dd804a71936b5f
Sessions can be used without cookies if the session identifier (in the example above, 437b930db84b8079c2dd804a71936b5f) is passed around as request parameter instead of a cookie; however, this is rather uncommon and it is generally considered bad practice.
All session information is stored server-side, and the session identifier is used behind-the-scenes to decide which set of information should be recalled (if any) for each request. Thus we get to your questions.
If the web application uses cookies and cookies are enabled on the users browser...
If the web app uses cookies and cookies are enabled on the browser, then there should not be a problem. With a standard session implementation, the cookies will be non-persistent, though, so the user will need to login again if he/she completely closes all instances of the browser.
If the web application uses persistent cookies and cookies are enabled on the users browser...
If the session-id is stored in a persistent cookie and user's browser respects that by persisting the session identifier cookie to the disk, then the session identifier will be sent even if the browser is fully closed and restarted. However, please be aware that most web frameworks have a garbage-collector-like system that deletes data for sessions that have showed any activity over a certain amount of time. So, for example, let's say my website requires activity at least once every 4 hours to keep a session active. If I login, receive a persistent cookie with my session ID, close my browser, and come back 5 hours later, then I will need to login again because my session information would have been cleared from the server even though my session ID cookie was persistent.
If the web application uses cookies and cookies are disabled on the users browser...
Bad news bears. You will either need to find a way to use a cookieless session (passing an identifier as a parameter for each request), or you will need to ask the user to enable cookies. There is no way around this.
If the web application uses persistent cookies and cookies are disabled on the users browser...
Same situation as #3. If the user has cookies disabled, you are out of luck. Either they need to enable cookies (at least for your site), or you need to find another way to pass around information between requests.
Session is stored in server memory (unless a state server or persistant store is used) but relies on a cookie to identify the session. If cookies aren't available then session won't work since there is no way to identify the user. Cookieless sessions can be used to get around this. Cookieless sessions aren't recommended as they can be hijacked with the session identifier in the url.
If an expiration isn't set on the cookie then it will be lost once the user closes all browser instances (they share memory) and not just the one visited through the website.
If the user has cookies disabled, then cookies aren't available for use by the application. People aren't as worried about cookies now as they were in the late 90's (lots of "security" people raised warnings that cookies could be used to store all sorts of things on your computer, even viruses).
Please help me whether my understanding is right.
ASP.NET sessions are stored on the web server and no cookies whatsoever are used for this.
ASP.NET if configured to use session with webconfig->session state: then we can configure it as either stateconnection or as sqlconnection.
ASP.NET if configured to use session state (either as stateconnection or as sqlconnection) then when user uses sessions in code then the cookies on client machine are used unless you specify in webconfig that cookieless=true
If we use <sessionState cookieless="true" /> then by default the stateconnection is set to localhost
When talking about Session in many dynamic web sites you want to store user data between HTTP requests (because http is stateless and you can't otherwise associate a request to any other request), but you don't want that data to be readable / editable at client side because you don't want the client to play around with that data without passing through your (server side) code.
The solution is to store that data server side, give it an "id", and let the client only know (and pass back at every http request) that id. There you go, sessions implemented. Or you can use the client as a convenient remote storage, but you would encrypt the data and keep the secret server-side.
Of course there are other aspects to consider, like you don't want people to hijack other's sessions, you want sessions to not last forever but to expire, and so on.
Session State contains information that is pertaining to a specific session (by a particular client/browser/machine) with the server. It's a way to track what the user is doing on the site.. across multiple pages...amid the statelessness of the Web. e.g. the contents of a particular user's shopping cart is session data. Cookies can be used for session state.
Cookies are small pieces of text, stored on the client's computer to be used only by the website setting the cookies. This allows webapplications to save information for the user, and then re-use it on each page if needed.
Every session will have SessionID. And Session ID is a unique number, server assigns to a specific user, during his visit(session). And defaultely, session ID is attached to a cookie and this cookie will be shared from client to server (and server to client) during its requests/responses. And server will identify session based on session id which is retrieved from cookie.
And regarding cookieless, if your browser doesnt support cookie or disabled, then cookieless will be used. Since it is Cookieless, asp.net can not create a cookie to save session id. Instead, the session id will be passed in query string.
Session : stored on server (memory or DB) and all pages in web application can use data in it.
Session State : store and retrieve values for a user as the user navigates pages in a web application.
Cookies : stored on client side as a file containing non sensitive data, but data like user favorites and preferences.
Cookieless : pass session id in URL query string and not storing it in cookies, in case you expect user to prevent or delete cookies.
I have an asp.net Web Api 2 / Identity 2 application that requires a user to be authenticated. The authentication works but I notice that when I restart my local development machine and try to access a method that requires authentication then I get a failure.
As my application is unchanged from the asp.net sample then I think it uses cookies to store user data on the client. Where and how does the Server or IIS store information on which users have authenticated? Does it do this just the once or on every HTTP? Is there a difference between my using Token or cookie authentication in the way that the authentication and also authorization is checked on the server?
I think you are misunderstanding how authentication works with ASP.Net. As an example, let me show you some cookie details for a site of mine that uses Identity (note the token is actually in the cookie, the two are not mutually exclusive concepts):
Name __RequestVerificationToken
Value afeILhaIvRr56jXXXXXXXXXXX
Host site.azurewebsites.net
Path /
Expires At end of session
Note that the cookie, by default, expires at the end of your session. That means when you restart your development machine, your cookie is expired and your token is no longer valid.
In particular I have read that with token authentication then there is no need for continual re-authentication every time a request is made to the server
You need to understand that HTTP is a stateless protocol. Each request happens in a vacuum, and therefore you need to pass some data back to the server so that it can tell that the person who authenticated with Request A is really the initiator of Request B. Almost always, that piece of data is from a cookie. So, every request does indeed re-authenticate, and typically with a token in a cookie.
The only piece of data about your session that is stored on the client is the cookie (unless you are doing something atypical). The rest is on the server. How it is stored can vary:
Inproc: Easiest to setup, sessions are stored in process. So when your server or app pool is restarted, that data disappears
State Server Mode: Sessions are stored in process, but outside of the ASP.Net worker process, so the application can be restarted without losing session data
SQL Server: Unsurprisingly, this stores data in a database. Very resilient, but more work to setup. Also your best option if you are on a web farm.
ref: http://msdn.microsoft.com/en-us/library/vstudio/ms178586(v=vs.100).aspx
Expanding on the great answer by Chris, I would like to add that there are two possible models here. In forms authentication (which is the default membership type for asp.net) the cookie can either store authentication information and then it's called a ticket or the information can be stored in session, with the cookie being a simple identifier for "reconnecting" the authenticated session with the requesting client on each subsequent request.
This "reconnecting" happens in the Application_AuthenticateRequest method of the global.asax. If you are using the default forms authentication storage, i.e. an SQL DB created for you by the framework, the reconnection will be done automatically. If you are using a custom authentication store (like accessing active directory yourself or a custom users table structure) you can override the the method and reconnect the authenticated session using your own implementation. In any case, the authentication data is populated in the User.Identity object's different properties. From that point, if you use the [Authorize] attribute, the framework accesses the object to check if the user is indeed authenticated and authorized.
I any case, the authentication information is tied to both the cookie and the session. Assuming your session is InProc, like Chris said, when the session is lost (through timeout, app pool recycle or restart of the dev machine) the server-side of the session is lost and your authentication / session cookie is replaced by a new one on the next request.
EDIT: Ohh... and one more side comment. Make sure you distinguish between authentication and authorization. The client is not re-authenticated on each request. Authentication is the process of providing your credentials and being identified by the server. Authorization is, now that the server has verified who you are, on each request it checks if you are authorized to access the resource you are requesting.
The server doesn't store information about who's authenticated and who isn't. Depending on your authentication mechanism (forms, tokens?), typically, when a user logs in, the server will return some form of authentication token that the client should pass back to the server on each API call.
Without knowing more about your configuration, it's difficult to explain why when you restart your server you have to re-authenticate, it sounds like the authentication token generated by the server is invalidated on restart.
Where and how does the Server or IIS store information on which users have authenticated?
IIS does not store state based on cookie authentication. Everything is determined based on the request. Either a request has the correct encrypted information, or it doesn't. If you look at a default Forms authentication in ASP.NET, you will find a cookie called .ADUAUTH ... this cookie has all the information to authenticate the request. If the cookie is half expired, it will be reset, but that's all IIS does.
Does it do this just the once or on every HTTP?
Every HTTP request is unique, so yes, per HTTP request.
Is there a difference between my using Token or cookie authentication in the way that the authentication and also authorization is checked on the server?
It's always checked on the server: To find out more, check out: How ASP.NET Security Works: http://msdn.microsoft.com/en-us/library/ks310b8y.ASPX
I think my answer could be a little contradicting to all of the above.. But I think If I understand right..
IIS stores inside the memory space of the ASP.NET worker process, i.e the session data in the RAM.
The storing of authentication state depends on the authentication model you are using. For example: if you are using the Federated authentication, through ADFS, then when a user loads your web page he is required to sign in providing his credentials. The ADFS then sets the authentication token which is stored in the session data, the session id is stored as cookies in user's browser. The server has the mapping of Session Id to its session data.
Now the user is authenticated. The ADFS looks for authentication token to mark a user as authenticated.
When you restart the server, the session data is lost as the data is stored in RAM.
There are ways to handle this, there are 3 types of session storage:
1. InProc (Stored in memory space of ASP .NET Worker process - RAM)
2. State Server (Stored out side of ASP .NET worker process, like on cloud Azure storage)
3. SQL Server session storage (Stored in SQL server)
I think you are adopting 1, because of which you encounter the problem.
In cases 2 and 3, the session is not lost when you restart the server.
Several things --
Token based authentication is not really authentication. It is just issuing you a unique token (can be a guid, unique string, etc) and then associating it with something (like your IP address) and saving that association server side (in a database?). Now whenever you use that token, from the client app, the server checks the association already stored and serves or denies or request.
In many ways, it is very similar to using Cookies to maintain authentication. Only, token-auth was designed more for web services operation than for UIs.
In short: Out of the box, the membership provider will run it's authentication method and upon success, it will create an auth ticket/token/cookie that will be stored from the site. In addition to this, there is a session cookie that is stored with the site as well. When you make a page request, it'll pull these things and use them to determine whether or not you are already authenticated. If it finds the ticket and sees that it is still good, it'll allow access.
When you restart your local environment, the session and it's information is destroyed which is why you have to log in again.
There is an entire pipeline in the framework that makes all of this stuff happen (having to do with authentication, authorization, and identity) and there are number of ok articles on the interwebs explaining this, but imo, they're almost all incomplete or hard to follow. If you want a great soup-to-nuts explanation, PluralSight.com has some training videos that will deconstruct and explain the entire pipeline for you. Understanding the pipeline can help you implement your own custom authentication, and I highly recommend it.
Instead of using ASP.NET MVC User's system, I'm simply using session, as the following:
When he logs in (username + password), I fetch the corresponding user from the Database and set:
Session["UserId"] = fetchedUser.UserId;
Then, I'm always checking if he is logged in:
if (Session["UserId"] != null && ...)
The problem is that if someone copies the value of ASP.NET_SessionId from a logged in user (eg: user goes to bathroom and coworker who is sitten next to him checks his cookies with chrome inspector), then he will be able to create a cookie in his computer and act as that user.
My questions are:
Why are sessions safer than cookies if the session id is saved in a cookie?
Can I make this safer (and continue using session)?
How does internally ASP.NET User authetication system do it?
A primary reason for not using Session as an authentication mechanism is that it could render your application vulnerable to Session Fixation. For example, a problem could be if a user arrived on your site using the HTTP protocol and receives a session ID that is stored in the ASP.NET_SessionId cookie. The user may later log in, and even though your login pages might be secured under HTTPS the session token has already been generated under HTTP which means it has already been transported using cleartext.
To answer your other points:
Why are sessions safer than cookies if the session id is saved in a
cookie?
The data stored in session is stored server side, so it is more difficult for an attacker to tamper with this data. All the cookie stores is a token for this data, rather than the data itself. Having said that, it is still safer to use the FormsAuthenticationProvider as this creates a new authentication token once login is complete rather than on session start for the reasons of avoiding session fixation as above.
Can I make this safer (and continue using session)? How does
internally ASP.NET User authetication system do it?
The built in provider is already fit for purpose, so it would be desirable to use that rather than fudge another mechanism to meet your requirements. It is also easily extensible so you can customise it to your needs. The ASP.NET User Authentication creates an encrypted ticket and stores it in the cookie rather than storing a reference to a server side variable: http://support.microsoft.com/kb/910443
I would also draw your attention to the signout mechanism and how to secure it. Particularly
Calling the SignOut method only removes the forms authentication cookie. The Web server does not store valid and expired authentication tickets for later comparison. This makes your site vulnerable to a replay attack if a malicious user obtains a valid forms authentication cookie.
Details here: http://msdn.microsoft.com/en-us/library/system.web.security.formsauthentication.signout.aspx
In addition you may want to set the "secure" flag on your ASP auth cookie to prevent it being leaked over HTTP by a MITM attacker.
Had a basic question as to the server side behavior while using cookies / session to track user authentication state.
Taking session based user authentication as an example - we allot a unique session id every time the user logs in. Assuming these sessionids are stored in persistent storage, for subsequent page requests should we hit the database or should we have a cache of recently used/valid session ids on the server side.
In the case of cookies once the server sends a cookie to the client side the next time the client requests a page does the server assume that the client has already been authenticated and is a returning user?
Also, in ASP is the Membership Provider session table hit every time the authenticated user requests a protected page?
Edit
My understanding post reading up on formsauth -
Webserver contains the app and a bunch of web services
User accesses the site for the first time and logs in through the logon page
Credentials are valiadated against a user store (a db)
Create a FormsAuthenticationTicket and use FormsAuthentication to encrypt the ticket and set the auth cookie
Subsequent requests from the user pass that auth cookie to the server
Server decrypts that auth cookie.
If that auth cookie can be decrypted and has not expired the server allows access. There is no checking at this time against the user store.
With Session: It depends on what mode of session store you are using. If you are using InProc you are not hitting database but with sql server mode you will be hitting database upon every request.
With Cookies:
Asp.net FormsAuthentication (used by Membership as well) can use cookies to store FormsAuthenticationTicket. This is the key elment to decide if user is authenticated or not.
Read the tutorial and it is the fundamentals.