I still get the error even if I have increased the limits as shown below.
I am using vs2013, MVC5 and Windows 8.1
<system.web>
<httpRuntime maxRequestLength="1048576" executionTimeout="3600" />
</system.web>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="1073741824" />
</requestFiltering>
</security>
<handlers>
<remove name="BlockViewHandler"/>
<add name="BlockViewHandler" path="*" verb="*" preCondition="integratedMode" type="System.Web.HttpNotFoundHandler" />
</handlers>
</system.webServer>
Related
I know this is an old question and asked many times before. But believe me I've tried them all and found no resolution.
And my web.config looks like :-
<system.web>
<authentication mode="None" />
<compilation debug="true" targetFramework="4.6.1" />
<httpRuntime targetFramework="4.6.1" maxRequestLength="512000" />
</system.web>
<system.webServer>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="52428800" />
</requestFiltering>
</security>
<modules>
<remove name="FormsAuthentication" />
</modules>
<handlers>
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<remove name="OPTIONSVerbHandler" />
<remove name="TRACEVerbHandler" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
</system.webServer>
Uploading a file of around 72 MB is popping up me this error - "Web server to deny the request because the content length exceeds the configured value."
PS:- Using IIS7.
Hello so I'm pretty new to using IIS and Visual Studio but I've managed to launch one website on IIS but when I try to launch this one I get this error across the page:
Error message:
Cannot add duplicate collection entry of type 'mimeMap' with unique key attribute 'fileExtension' set to '.mp4'
There's a section that reads Config Error:so here is my web.config file:
<?xml version="1.0"?>
<configuration>
<appSettings>
<add key="DetailLogging" value="True"/>
<add key="LoggingConfigFile" value="log4net.config"/>
<add key="DatabaseConnectionString" value="Integrated Security=True; MultipleActiveResultSets=True; Data source=.\SQLEXPRESS; Initial Catalog=WebEvaluation" />
<add key="Email" value="***********************"/>
<add key="SupportEmailID" value="*************************"/>
<add key="ForgotPasswordEmailSubject" value="Butterfly Scheme e-Certification Admin Console - Password Request"/>
<add key="WelcomeMailSubject" value="Butterfly Scheme e-Certification Admin Console"/>
<add key="PasswordChangedMailSubject" value="Butterfly Scheme e-Certification Admin Console - Password Changed"/>
<add key="PasscodeDeleteMailSubject" value="Passcode delete notification - "/>
<add key="Host" value="***********"/>
<add key="PortNo" value="25"/>
<add key="Password" value="***********"/>
<add key="SiteURL" value="***********************************"/>
<add key="RecordsPerPage" value="20" />
<add key="PasscodeCreateMailSubject" value="Butterfly Scheme e-Certification Passcode List created for : "/>
<add key ="XlsConnectionString" value="Provider=Microsoft.Jet.OLEDB.4.0;Data Source={0}; Extended Properties='Excel 8.0;IMEX=1'"/>
<add key ="XlsxConnectionString" value="Provider=Microsoft.ACE.OLEDB.12.0;Data Source={0}; Extended Properties='Excel 8.0;'"/>
</appSettings>
<system.web>
<compilation debug="true" targetFramework="4.0">
<assemblies>
<add assembly="System.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=******************"/>
<add assembly="System.Web.Extensions.Design, Version=4.0.0.0, Culture=neutral, PublicKeyToken=******************"/>
<add assembly="System.Windows.Forms, Version=4.0.0.0, Culture=neutral, PublicKeyToken=B77A5C561934E089"/>
</assemblies>
</compilation>
<httpRuntime requestValidationMode="2.0" maxRequestLength="2097151"
executionTimeout="900"/>
<sessionState mode="InProc" timeout="20"/>
</system.web>
<system.webServer>
<modules runAllManagedModulesForAllRequests="true"/>
<staticContent>
<mimeMap fileExtension=".mp4" mimeType="video/mp4"/>
<mimeMap fileExtension=".m4v" mimeType="video/m4v"/>
<mimeMap fileExtension=".3gp" mimeType="video/3gpp"/>
</staticContent>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="2147482624"/>
</requestFiltering>
</security>
</system.webServer>
</configuration>
You could add something like this:
<remove fileExtension=".mp4" />
Or, since the MP4 mime type seems to be already present in the roots configuration file, simply omit the whole line:
<mimeMap fileExtension=".mp4" mimeType="video/mp4"/>
If you really want to be sure that the extensions you seem to require are present, this could be a replacement for the staticContent tag:
<staticContent>
<remove fileExtension=".mp4" />
<remove fileExtension=".m4v" />
<remove fileExtension=".3gp" />
<mimeMap fileExtension=".mp4" mimeType="video/mp4"/>
<mimeMap fileExtension=".m4v" mimeType="video/m4v"/>
<mimeMap fileExtension=".3gp" mimeType="video/3gpp"/>
</staticContent>
Could not load type "PresentationLayer.Global"
Check if you namespace is PresentationLayer or is changed? If changed update it in the markup, by right clicking on Global.asax and select "View Markup"
I have created a .Net project 4.6 using web api.
just for simplicity purpose, I created default.htm in the parent directory. I publish my project to localhost, and set up the default document to default.htm as per the screenshot:
published web.config:
<system.web>
<authentication mode="None" />
<compilation targetFramework="4.6" />
<httpRuntime targetFramework="4.5.2" />
<httpModules>
<add name="ApplicationInsightsWebTracking" type="Microsoft.ApplicationInsights.Web.ApplicationInsightsHttpModule, Microsoft.AI.Web" />
</httpModules>
<customErrors mode="Off" />
</system.web>
<system.webServer>
<modules>
<remove name="FormsAuthentication" />
<remove name="ApplicationInsightsWebTracking" />
<add name="ApplicationInsightsWebTracking" type="Microsoft.ApplicationInsights.Web.ApplicationInsightsHttpModule, Microsoft.AI.Web" preCondition="managedHandler" />
</modules>
<handlers>
<remove name="ExtensionlessUrlHandler-Integrated-4.0" />
<remove name="OPTIONSVerbHandler" />
<remove name="TRACEVerbHandler" />
<add name="ExtensionlessUrlHandler-Integrated-4.0" path="*." verb="*" type="System.Web.Handlers.TransferRequestHandler" preCondition="integratedMode,runtimeVersionv4.0" />
</handlers>
<validation validateIntegratedModeConfiguration="false" />
</system.webServer>
However, whenever I navigate to http://localhost/, it always returns 404 as per the screenshot below: Can someone please help? Thanks
I am using port 80:
All published Web Site in IIS need to have a port like this:
1.Assuming you are using the port of 8462.
2.Try to navigate this url = localhost:8462
Make sure your asp.net has been registered to your IIS like this aspnet_regiis -i
Good Luck!
When using the April 2013 AjaxControlToolkit I receive the error:
0x800a139e - JavaScript runtime error: error raising upload complete event and start new upload
When trying to upload a file using the AjaxFileUpload control.
Make sure the following stuff should be present in web.config.
<configuration>
<system.web>
<compilation debug="true" targetFramework="4.5" />
<httpRuntime targetFramework="4.5" maxRequestLength="42949672" />
<httpHandlers>
<add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/>
</httpHandlers>
</system.web>
<system.webServer>
<validation validateIntegratedModeConfiguration="false"/>
<handlers>
<add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/>
</handlers>
<security>
<requestFiltering>
<requestLimits maxAllowedContentLength="4294967295"/>
</requestFiltering>
</security>
</system.webServer>
</configuration>
To resolve the error you need to add this
<httpHandlers>
<add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit"/>
</httpHandlers>
in your
<system.web>
section of your web.config
If your app pool is set to classic then this happens unless you use precondition=”integratedMode” added to httphandler for system.webserver
<add name="AjaxFileUploadHandler" verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit" preCondition="integratedMode"/>
Had the same issue after switching to 4.5. The suggested solution didn't worked until I added full assemply name:
<httpHandlers>
<add verb="*" path="AjaxFileUploadHandler.axd" type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit, Version=4.5.7.725, Culture=neutral, PublicKeyToken=28F01B0E84B6D53E" />
</httpHandlers>
Turns out, if you have the 3.5 version in the "old" gac, and 4.5 in the new Microsoft.net/assembly gac, your webapp (IIS?) will not choose the right one!?
Since my application uses forms authentication, I added this to my web.config in order to put the ajaxfileupload to work:
<location path="AjaxFileUploadHandler.axd">
<system.web>
<authorization>
<allow users="*"/>
</authorization>
</system.web>
</location>
If anyone still facing the issue even after the changes said by #sridharnetha try to include the below lines.
Important to add UseAbsoluteHandlerPath ="false"
<ajax:AjaxFileUpload ID="AjaxFileUpload11" runat="server"
MaximumNumberOfFiles="3" AllowedFileTypes="txt,xls,xlsx,doc,docx,pdf"
Width="400px" UseAbsoluteHandlerPath ="false"
OnUploadComplete="OnUploadComplete"
OnClientUploadStart="UploadStart"
OnClientUploadCompleteAll="UploadComplete"
ClearFileListAfterUpload="true"
OnClientUploadError="UploadError"/>
In Web.config
<httpHandlers>
<add verb="*" path="http://localhost/AjaxFileUploadHandler.axd"
type="AjaxControlToolkit.AjaxFileUploadHandler, AjaxControlToolkit" />
</httpHandlers>
My page is written in ASP.Net, and our site runs IIS 7.5.
I'm trying to receive an Xml document from an outside source posting to a page in our website. I can send a test document from a web page and receive it, using Content-Type “application/x-www-form-urlencoded”. The sender's documents are Content-Type "text/xml." I have modified the web.config to try various things, all of which still give us a "blank" document from the sender. Is there some setting that I"m still missing that would cause this?
My web.config settings are:
<system.web>
<compilation debug="true" strict="false" explicit="true" targetFramework="4.0" />
<sessionState mode="Off" cookieless="true" />
<httpRuntime requestValidationMode="2.0" enableVersionHeader="false" />
<webServices>
<protocols>
<add name="HttpGet" />
<add name="HttpPost" />
</protocols>
</webServices>
</system.web>
<system.webServer>
<httpProtocol>
<customHeaders>
<add name="P3P" value="policyref='https://oursite/w3c/p3p.xml',CP='NON DSP COR CUR OUR IND PUR ONL PHY'" />
<add name="Access-Control-Allow-Origin" value="*" />
<add name="Access-Control-Allow-Methods" value="POST,GET" />
<add name="Access-Control-Allow-Headers" value="content-type:text/xml;charset=utf-8"/>
</customHeaders>
</httpProtocol>
<staticContent>
<mimeMap fileExtension=".aspx" mimeType="text/xml" />
<mimeMap fileExtension=".aspx" mimeType="application/x-www-form-urlencoded"/>
</staticContent>
<httpErrors errorMode="Detailed" />
<httpCompression>
<staticTypes>
<add mimeType="text/xml" enabled="true"/>
</staticTypes>
<dynamicTypes>
<add mimeType="text/xml" enabled="true"/>
</dynamicTypes>
</httpCompression>
<security>
<requestFiltering>
<fileExtensions allowUnlisted="true" />
</requestFiltering>
</security>
</system.webServer>