I am creating a report from a query where a field ABC is displayed as CAT if yes and as MOUSE if no. But unfortunately, when there are instances where the table inside the query does not contain field ABC, the report generates a error pop-up. Is there any way to by-pass this and run the report with other fields excluding the missing field?
I heard that IIF Exist function could help, but I am really blank here. I wrote the access query like below:
Iif (fieldExists(iif([ABC]=5, 'CAT', 'MOUSE'),iif([ABC]=5, 'CAT', 'MOUSE'), '')) AS TOMnJERRY
This function is maybe the shortest one to test if a field exists in Access:
Function FieldExists(ByVal Table As String, ByVal Field As String) As Boolean
On Error Resume Next
FieldExists = (DCount(Field, Table) >= 0)
End Function
How it works:
If the field exists, the expression (DCount(Field, Table) >= 0) is obviously always true, because DCount never returns a negative value. If the field doesn't exist, an error will occur and the program will jump to the next line without setting the return variable FieldExist, so this one will keep at default and this is false.
So the solution for your problem should look like this:
Iif (FieldExists('YourTable','ABC'), iif([ABC]=5, 'CAT', 'MOUSE'), '')
Related
I need to get all the matches of a regular expression in a text field in a MariaDB table. As far as I know REGEXP_SUBSTR is the way to go to get the value of the match of a regular expression in a text field, but it always returns after the first match and I would like to get all matches.
Is there any way to do this in MariaDB?
An example of the content of the text field would be:
#Generation {
// 1
True =>
`CP?:24658` <= `CPV?:24658=57186`;
//`CP?23432:24658` <= `CPV?:24658=57186`
// 2
`CP?:24658` <> `CPV?:24658=57178` =>
`CP?:24656` <> `CPV?:24656=57169`;
And the select expression that I'm using right now is:
select REGEXP_SUBSTR(textfield,'CP\\?(?:\\d*:)*24658') as my_match
from table
where id = 1243;
Which at the moment returns just the first match:
CP?:24658
And I would like it to return all matches:
CP?:24658
CP?23432:24658
CP?:24658
Use just REGEXP to find the interesting rows. Put those into a temp table
Repeatedly process the temp table -- but remove the SUBSTR as you use it.
What will you be doing with each substr? Maybe that will help us devise a better approach.
how to manage the result of a query that returns an integer "select count(*) from table"?
1) I've tried to bind the output of a SQL Execute Statement service to an integer variable and doesn't work. (type mistmatch)
2) i've tried to use types like 'SQLResult', SQLResultRow, SQLResultColumn as well but they dont work:
Caused by: com.lombardisoftware.core.TeamWorksException: Type ismatch the value "[Element: ]" must be and instance of type atructured IBM BPM Java Class found: org.jdom.Element
3) i've tried to bind the output to a XMLElement variable and i've got this value
< resultSet recordCount=\"1\" columnCount=\"1\">5< /columnn>< /record>< /resultSet>
so now... how can I access the recordCount attribute of this node?
anyway, I don't like so manipulate a variable of XMLType, when are the types SQLResult, SQLResultRow, SQLResultColumn used?
****** EDITED *******
even if i get a result as XMLElement.. i can't manipulate it.
methods like: tw.local.result[0].rows[0].column[0].getText() don't work (the intellisense as well)
the XMLElement as an attribute "recordCount" but i don't know how to get his value..
Anyway, the only workaround that i found is to change the query in order to return a normal set of records(not a scalar value)
select field from table instead of select count(field) from table
so i could to map the output value to a list of objects and than count its length...
ugly and dirty :-(
anyone know how manipulate the XMLElement in a script block?
Please try this.
Bind the output variable from sql execute statement as 'ANY' type.
variable name - result (ANY)
Query - select count(field) as COUNTVAL from table
tw.local.totalCount = tw.local.result[0].rows[0].indexedMap.COUNTVAL;
Use Return type as XMLElement then bind a XMLElement in output mapping.
For eg: If you are using tw.local.output as ouput mapping (of type XMLElement) then,
log.info("Count "+tw.local.output.xpath('/resultSet/record/column').item(0).getText());
This will print the count
If you want to get "recordCount" Attribute then use
tw.local.output.getAttribute("recordCount");
I am trying to write a following PL/SQL function body for a dynamic action
The purpose of dynamic action is to set value for text area based on input parameters. Way I am trying to do it, is that setting the value into variable for different options
declare
P_NOTE varchar(100); -- derive value
P_WEBSERVER varchar(100); -- derive name
begin
-- for getting the P_NOTE value
select distinct note into P_NOTE from port_mapping where PLATFORM = :P3_PLATFORM and VERSION = :P3_VERSION;
-- for getting web server value
select CONCAT(P_NOTE,CONCAT('https-',:P3_CLIENT)) into P_WEBSERVER from dual order by 1;
if (:P3_PLATFORM = 'Apache') then
return P_WEBSERVER;
end if;
end;
However I am getting error
ORA-06550: line 15, column 5:
PLS-00372: In a procedure, RETURN statement cannot contain an expression
ORA-06550: line 15, column 5:
PL/SQL: Statement ignored
declare
P_NOTE varchar(100);
P_WEBSERVER varchar(100);
I am not sure what I am missing.
(Since you did not post any apex version this explanation deals with version 4.2)
If this -is- a dynamic action and the code you posted is in a true action of type 'Execute PL/SQL Code' then you can not use RETURN. The plsql block is not a function body (close, Mr Kemp!).
If you want to return values from the session state to page items then you need to use the "Page Items to Return" item of the true action.
This will put the session state of the defined page items into the value of the item on the page. This means that you can not use any variable to just put stuff in to be able to return it to the page, but you need to use an actual page item (after all, these are bind variables).
To clarify further, you would not write :
return P_WEBSERVER;
But you'd have to use a page item, say P3_WEBSERVER, and you'll need to create one if it doesn't exist of course:
:P3_WEBSERVER := p_webserver;
Of course you'd need to make sure that the correct value will be in there as you can not shortcircuit as you did in your code sample (p_webserver will usually hold a value even if the platform is not 'Apache') eg:
if (:P3_PLATFORM = 'Apache') then
:P3_WEBSERVER := P_WEBSERVER;
else
:P3_WEBSERVER := NULL;
end if;
Just read error message:
line 15, column 5
So, trouble caused by this line:
return P_WEBSERVER;
return not allowed in PL/SQL blocks, use output parameter to return a value.
Read Tom's answer to find out how to do that.
Current select statement:
SELECT *
FROM vw_svc200_open
WHERE (CUSTNMBR = '::CUSTNMBR::')
ORDER BY ::sortcolumn::
This works and all is well. But now I need to modify this select string to apply an extra filter.
SELECT *
FROM vw_svc200_open
WHERE
CASE
WHEN ::CUSTNMBR:: = 'ABC123'
THEN (CUSTNMBR = '::CUSTNMBR::' AND CNTCPRSN = '::CNTCPRSN::')
ELSE (CUSTNMBR = '::CUSTNMBR::')
END
ORDER BY ::sortcolumn::
So basically I need to have my select filter on customer number and if customer number is ABC123 then I also need it to filter on Contact person... The problem with the second SELECT (using the CASE statement) is that it throws an "error near =" on the THEN line.
The ::CUSTNMBR:: and ::CNTCPRSN:: are url string variables (What are those called again?).
Ex.
www.mywebsite.com/mypage.asp?Custnmbr=ABC123
Am I going to have to add some logic to the asp page (i.e. IF/Then) to set a variable, and then pass that variable to the *fp_sQry=* line?
I ended up using nested if statements to set the select statement.
Actually I spend whole day on the EntityFramework for foreign key.
assume we have two table.
Process(app_id,process_id)
LookupProcessId(process_id, process_description)
you can understand two tables with names, first table ,use process_id to indicate every application, and description is in the seoncd table.
Actually i try many times and figure out how to do inquery: it was like
Dim result = (from x in db.Processes where x.LookupProcess is (from m in db.LookupProcessIds where descr = "example" select m).FirstOrDefault() select x).FirstOrDefault()
First I want to ask is there easier way to do it.
Second i want to ask question is about insert
p As New AmpApplication.CUEngData.Process
p.app_id=100
p.LookupProcess = (from m in db.LookupProcessIds where descr = "example" select m).FirstOrDefault()
db.AddToProcesses(p)
db.SaveChanges()
from appearance it looks fine, but it give me error says
Entities in 'AmpCUEngEntities.Processes' participate in the 'FK_Process_LookupProcess' relationship. 0 related 'LookupProcess' were found. 1 'LookupProcess' is expected.
can i ask is that insert wrong? and is that my query correct?
For your first question:
Dim result = (from x in db.Processes
where x.LookupProcess.descr = "example"
select x).FirstOrDefault()
Actually, you missed some concepts from DataEntityModel, and its Framework. To manipulate data, you have to call object from contextual point of view. Those allow you to specify to the ObjectStateManager the state of an DataObject. In your case, if you have depending data from FK, you will have to add/update any linked data from leaf to root.
This example demonstrate simple (no dependances) data manipulation. A select if existing and an insert or update.
If you want more info about ObjectStateManager manipulation go to http://msdn.microsoft.com/en-us/library/bb156104.aspx
Dim context As New Processing_context 'deseign your context (this one is linked to a DB)
Dim pro = (From r In context.PROCESS
Where r.LOOKUPPROCESS.descr = LookupProcess.descr
Select r).FirstOrDefault()
If pro Is Nothing Then 'add a new one
pro = New context.PROCESS With {.AP_ID = "id", .PROCESS_ID = "p_id"}
context.PROCESS.Attach(pro)
context.ObjectStateManager.ChangeObjectState(pro, System.Data.EntityState.Added)
Else
'update data attibutes
pro.AP_ID = "id"
pro.PROCESS_ID = "p_id"
context.ObjectStateManager.ChangeObjectState(pro, System.Data.EntityState.Modified)
'context.PROCESS.Attach(pro)
End If
context.SaveChanges()
I hope this will help. Have a nice day!
For your first question, to expand on what #jeroenh suggested:
Dim result = (from x in db.Processes.Include("LookupProcess")
where x.LookupProcess.descr = "example"
select x).FirstOrDefault()
The addition of the Include statement will hydrate the LookupProcess entities so that you can query them. Without the Include, x.LookupProcess will be null which would likely explain why you got the error you did.
If using the literal string as an argument to Include is not ideal, see Returning from a DbSet 3 tables without the error "cannot be inferred from the query" for an example of doing this using nested entities.
For your second question, this line
p.LookupProcess = (from m in db.LookupProcessIds
where descr = "example" select m).FirstOrDefault()
Could cause you problems later on because if there is no LookupProcessId with a process_description of "example", you are going to get null. From MSDN:
The default value for reference and nullable types is null.
Because of this, if p.LookupProcess is null when you insert the entity, you will get the exception:
Entities in 'AmpCUEngEntities.Processes' participate in the 'FK_Process_LookupProcess' relationship. 0 related 'LookupProcess' were found. 1 'LookupProcess' is expected.
To avoid this kind of problem, you will need to check that p.LookupProcess is not null before it goes in the database.
If Not p.LookupProcess Is Nothing Then
db.AddToProcesses(p)
db.SaveChanges()
End If