Related
When I'm attempting to answer this question, I noticed that row.names(x) <- vector is not working when using lapply on a list of data frames, while row.names<- worked.
Here's some sample data, I'm attempting to append the names of the list to the rownames of the dataframes:
l <- list(a=data.frame(col = c(1,2,3),row.names = c("k","l","m")),
b=data.frame(col = c(4,5,6), row.names = c("o","p","r")))
$a
col
k 1
l 2
m 3
$b
col
o 4
p 5
r 6
For example when looping over the names of the list and setting row.names in lapply, this is the result:
lapply(names(l), \(x) row.names(l[[x]]) <- paste0(x, ".", rownames(l[[x]])))
[[1]]
[1] "a.k" "a.l" "a.m"
[[2]]
[1] "b.o" "b.p" "b.r"
When we do the same code outside lapply, it worked:
> row.names(l[["a"]]) <- paste0("a.", rownames(l[["a"]]))
> l
$a
col
a.k 1
a.l 2
a.m 3
The solution I have for this problem is to use row.names<- (as suggested by the original OP):
setNames(lapply(names(l),
\(x) l[[x]] %>% `row.names<-` (paste(x, rownames(l[[x]]), sep = "."))),
names(l))
$a
col
a.k 1
a.l 2
a.m 3
$b
col
b.o 4
b.p 5
b.r 6
But I'm not sure why did the row.names(x) <- vector syntax failed and why row.names<- worked.
The assignment is local, i.e. it creates a modified object l with assigned row names inside the anonymous function.
The result of the <- assignment is returned from that anonymous function. However, the result of <- is always the RHS, even for replacement functions. You can make this visible by putting parentheses around the assignment in the global scope:
(row.names(l$a) <- paste0('a.', row.names(l$a)))
# [1] "a.k" "a.l" "a.m"
So in your second piece of code, the the transformation used by lapply is just the result of the assignment, which is the RHS of the assignment, which is the transformed row names. To fix the code, you need to return the modified object, l[[x]], itself:
lapply(
names(l),
\(x) {
row.names(l[[x]]) <- paste0(x, ".", row.names(l[[x]]))
l[[x]]
}
)
Or you use row.names<- as a function call:
lapply(names(l), \(x) `row.names<-`(l[[x]], paste0(x, ".", row.names(l[[x]]))))
And to make this a bit more readable use Map instead of lapply:
Map(\(x, n) `row.names<-`(x, paste0(n, ".", row.names(x))), l, names(l))
Or, without anonymous function (although I’m not convinced this is more readable):
Map(`row.names<-`, l, Map(paste0, names(l), ".", Map(row.names, l)))
I want my function to be able to take a value or a column name. How can I do this with data.table?
library(data.table)
df <- data.table(a = c(1:5),
b = c(5:1),
c = c(1, 3, 5, 3, 1))
myfunc <- function(val) {
df[a >= val]
}
# This works:
myfunc(2)
# This does not work:
myfunc("c")
If I define my function as:
myfunc <- function(val) {
df[a >= get(val)]
}
# This doesn't work:
myfunc(2)
# This works:
myfunc("c")
What is the best way to resolve this?
Edit: To be clear, I want to results to be the same as:
# myfunc(2)
df %>%
filter(a >= 2)
# myfunc("c")
df %>%
filter(a >= c)
EDIT:
Thanks all for the responses, I think I like dww's answer the best.
I wish it was as easy as in dplyr, where I can do:
myfunc <- function(val) {
df %>%
filter(a >= {{val}})
}
# Both work:
myfunc(2)
myfunc(c)
If you build and parse the whole expression, then you can evaluate it in its entirety. For example
myfunc <- function(val) {
df[eval(parse(text=paste("a >= ", val)))]
}
Though relying on a function that lets you mix values and variable names in the same parameter might be dangerous. Especially in the case where you actually wanted to match on character values rather than variable names. If you passed in the whole expression you could do
myfunc <- function(expr) {
expr <- substitute(expr)
df[eval(expr)]
}
myfunc(a>=3)
myfunc(a>=c)
The question did not actually define the desired behavior so we assume that df must be a data.table and if a character string is passed then the column of that name should be returned and if a number is passed then those rows whose a column exceed that number should be returned.
Define an S3 generic and methods for character and default.
myfunc <- function(x, data = df) UseMethod("myfunc")
myfunc.character <- function(x, data = df) data[[x]]
myfunc.default <- function(x, data = df) data[a > x]
myfunc(2)
## a b c
## 1: 3 3 5
## 2: 4 2 3
## 3: 5 1 1
myfunc("c")
## [1] 1 3 5 3 1
I want to create a string in a loop and use this string as object in this loop. Here is a simplified example:
for (i in 1:2) {
x <- paste("varname",i, sep="")
x <- value
}
the loop should create varname1, varname2. Then I want to use varname1, varname2 as objects to assign values. I tried paste(), print() etc.
Thanks for help!
You could create the call() to <- and then evaluate it. Here's an example,
value <- 1:5
for (i in 1:2) {
x <- paste("varname",i, sep="")
eval(call("<-", as.name(x), value))
}
which creates the two objects varname1 and varname2
varname1
# [1] 1 2 3 4 5
varname2
# [1] 1 2 3 4 5
But you should really try to avoid assigning to the global environment from with in a method/function. We could use a list along with substitute() and then we have the new variables together in the same place.
f <- function(aa, bb) {
eval(substitute(a <- b, list(a = as.name(aa), b = bb)))
}
Map(f, paste0("varname", 1:2), list(1:3, 3:6))
# $varname1
# [1] 1 2 3
#
# $varname2
# [1] 3 4 5 6
assign("variableName", 5)
would do that.
For example if you have variable names in array of strings you can set them in loop as:
assign(varname[1], 2 + 2)
More and more information
https://stat.ethz.ch/R-manual/R-patched/library/base/html/assign.html
#MahmutAliÖZKURAN has answered your question about how to do this using a loop. A more "R-ish" way to accomplish this might be:
mapply(assign, <vector of variable names>, <vector of values>,
MoreArgs = list(envir = .GlobalEnv))
Or, as in the case you specified above:
mapply(assign, paste0("varname", 1:2), <vector of values>,
MoreArgs = list(envir = .GlobalEnv))
I had the same issue and for some reason my apply's weren't working (lapply, assign directly, or my preferred goto, mclapply)
But this worked
vectorXTS <- mclapply(symbolstring,function(x)
{
df <- symbol_data_set[symbol_data_set$Symbol==x,]
return(xts(as.data.frame(df[,-1:-2]),order.by=as.POSIXct(df$Date)))
})
names(symbolstring) <- symbolstring
names(vectorXTS) <- symbolstring
for(i in symbolstring) assign(symbolstring[i],vectorXTS[i])
I want to assign multiple variables in a single line in R. Is it possible to do something like this?
values # initialize some vector of values
(a, b) = values[c(2,4)] # assign a and b to values at 2 and 4 indices of 'values'
Typically I want to assign about 5-6 variables in a single line, instead of having multiple lines. Is there an alternative?
I put together an R package zeallot to tackle this very problem. zeallot includes an operator (%<-%) for unpacking, multiple, and destructuring assignment. The LHS of the assignment expression is built using calls to c(). The RHS of the assignment expression may be any expression which returns or is a vector, list, nested list, data frame, character string, date object, or custom objects (assuming there is a destructure implementation).
Here is the initial question reworked using zeallot (latest version, 0.0.5).
library(zeallot)
values <- c(1, 2, 3, 4) # initialize a vector of values
c(a, b) %<-% values[c(2, 4)] # assign `a` and `b`
a
#[1] 2
b
#[1] 4
For more examples and information one can check out the package vignette.
There is a great answer on the Struggling Through Problems Blog
This is taken from there, with very minor modifications.
USING THE FOLLOWING THREE FUNCTIONS
(Plus one for allowing for lists of different sizes)
# Generic form
'%=%' = function(l, r, ...) UseMethod('%=%')
# Binary Operator
'%=%.lbunch' = function(l, r, ...) {
Envir = as.environment(-1)
if (length(r) > length(l))
warning("RHS has more args than LHS. Only first", length(l), "used.")
if (length(l) > length(r)) {
warning("LHS has more args than RHS. RHS will be repeated.")
r <- extendToMatch(r, l)
}
for (II in 1:length(l)) {
do.call('<-', list(l[[II]], r[[II]]), envir=Envir)
}
}
# Used if LHS is larger than RHS
extendToMatch <- function(source, destin) {
s <- length(source)
d <- length(destin)
# Assume that destin is a length when it is a single number and source is not
if(d==1 && s>1 && !is.null(as.numeric(destin)))
d <- destin
dif <- d - s
if (dif > 0) {
source <- rep(source, ceiling(d/s))[1:d]
}
return (source)
}
# Grouping the left hand side
g = function(...) {
List = as.list(substitute(list(...)))[-1L]
class(List) = 'lbunch'
return(List)
}
Then to execute:
Group the left hand side using the new function g()
The right hand side should be a vector or a list
Use the newly-created binary operator %=%
# Example Call; Note the use of g() AND `%=%`
# Right-hand side can be a list or vector
g(a, b, c) %=% list("hello", 123, list("apples, oranges"))
g(d, e, f) %=% 101:103
# Results:
> a
[1] "hello"
> b
[1] 123
> c
[[1]]
[1] "apples, oranges"
> d
[1] 101
> e
[1] 102
> f
[1] 103
Example using lists of different sizes:
Longer Left Hand Side
g(x, y, z) %=% list("first", "second")
# Warning message:
# In `%=%.lbunch`(g(x, y, z), list("first", "second")) :
# LHS has more args than RHS. RHS will be repeated.
> x
[1] "first"
> y
[1] "second"
> z
[1] "first"
Longer Right Hand Side
g(j, k) %=% list("first", "second", "third")
# Warning message:
# In `%=%.lbunch`(g(j, k), list("first", "second", "third")) :
# RHS has more args than LHS. Only first2used.
> j
[1] "first"
> k
[1] "second"
Consider using functionality included in base R.
For instance, create a 1 row dataframe (say V) and initialize your variables in it. Now you can assign to multiple variables at once V[,c("a", "b")] <- values[c(2, 4)], call each one by name (V$a), or use many of them at the same time (values[c(5, 6)] <- V[,c("a", "b")]).
If you get lazy and don't want to go around calling variables from the dataframe, you could attach(V) (though I personally don't ever do it).
# Initialize values
values <- 1:100
# V for variables
V <- data.frame(a=NA, b=NA, c=NA, d=NA, e=NA)
# Assign elements from a vector
V[, c("a", "b", "e")] = values[c(2,4, 8)]
# Also other class
V[, "d"] <- "R"
# Use your variables
V$a
V$b
V$c # OOps, NA
V$d
V$e
here is my idea. Probably the syntax is quite simple:
`%tin%` <- function(x, y) {
mapply(assign, as.character(substitute(x)[-1]), y,
MoreArgs = list(envir = parent.frame()))
invisible()
}
c(a, b) %tin% c(1, 2)
gives like this:
> a
Error: object 'a' not found
> b
Error: object 'b' not found
> c(a, b) %tin% c(1, 2)
> a
[1] 1
> b
[1] 2
this is not well tested though.
A potentially dangerous (in as much as using assign is risky) option would be to Vectorize assign:
assignVec <- Vectorize("assign",c("x","value"))
#.GlobalEnv is probably not what one wants in general; see below.
assignVec(c('a','b'),c(0,4),envir = .GlobalEnv)
a b
0 4
> b
[1] 4
> a
[1] 0
Or I suppose you could vectorize it yourself manually with your own function using mapply that maybe uses a sensible default for the envir argument. For instance, Vectorize will return a function with the same environment properties of assign, which in this case is namespace:base, or you could just set envir = parent.env(environment(assignVec)).
As others explained, there doesn't seem to be anything built in. ...but you could design a vassign function as follows:
vassign <- function(..., values, envir=parent.frame()) {
vars <- as.character(substitute(...()))
values <- rep(values, length.out=length(vars))
for(i in seq_along(vars)) {
assign(vars[[i]], values[[i]], envir)
}
}
# Then test it
vals <- 11:14
vassign(aa,bb,cc,dd, values=vals)
cc # 13
One thing to consider though is how to handle the cases where you e.g. specify 3 variables and 5 values or the other way around. Here I simply repeat (or truncate) the values to be of the same length as the variables. Maybe a warning would be prudent. But it allows the following:
vassign(aa,bb,cc,dd, values=0)
cc # 0
list2env(setNames(as.list(rep(2,5)), letters[1:5]), .GlobalEnv)
Served my purpose, i.e., assigning five 2s into first five letters.
Had a similar problem recently and here was my try using purrr::walk2
purrr::walk2(letters,1:26,assign,envir =parent.frame())
https://stat.ethz.ch/R-manual/R-devel/library/base/html/list2env.html:
list2env(
list(
a=1,
b=2:4,
c=rpois(10,10),
d=gl(3,4,LETTERS[9:11])
),
envir=.GlobalEnv
)
If your only requirement is to have a single line of code, then how about:
> a<-values[2]; b<-values[4]
I'm afraid that elegent solution you are looking for (like c(a, b) = c(2, 4)) unfortunatelly does not exist. But don't give up, I'm not sure! The nearest solution I can think of is this one:
attach(data.frame(a = 2, b = 4))
or if you are bothered with warnings, switch them off:
attach(data.frame(a = 2, b = 4), warn = F)
But I suppose you're not satisfied with this solution, I wouldn't be either...
R> values = c(1,2,3,4)
R> a <- values[2]; b <- values[3]; c <- values[4]
R> a
[1] 2
R> b
[1] 3
R> c
[1] 4
Another version with recursion:
let <- function(..., env = parent.frame()) {
f <- function(x, ..., i = 1) {
if(is.null(substitute(...))){
if(length(x) == 1)
x <- rep(x, i - 1);
stopifnot(length(x) == i - 1)
return(x);
}
val <- f(..., i = i + 1);
assign(deparse(substitute(x)), val[[i]], env = env);
return(val)
}
f(...)
}
example:
> let(a, b, 4:10)
[1] 4 5 6 7 8 9 10
> a
[1] 4
> b
[1] 5
> let(c, d, e, f, c(4, 3, 2, 1))
[1] 4 3 2 1
> c
[1] 4
> f
[1] 1
My version:
let <- function(x, value) {
mapply(
assign,
as.character(substitute(x)[-1]),
value,
MoreArgs = list(envir = parent.frame()))
invisible()
}
example:
> let(c(x, y), 1:2 + 3)
> x
[1] 4
> y
[1]
Combining some of the answers given here + a little bit of salt, how about this solution:
assignVec <- Vectorize("assign", c("x", "value"))
`%<<-%` <- function(x, value) invisible(assignVec(x, value, envir = .GlobalEnv))
c("a", "b") %<<-% c(2, 4)
a
## [1] 2
b
## [1] 4
I used this to add the R section here: http://rosettacode.org/wiki/Sort_three_variables#R
Caveat: It only works for assigning global variables (like <<-). If there is a better, more general solution, pls. tell me in the comments.
For a named list, use
list2env(mylist, environment())
For instance:
mylist <- list(foo = 1, bar = 2)
list2env(mylist, environment())
will add foo = 1, bar = 2 to the current environement, and override any object with those names. This is equivalent to
mylist <- list(foo = 1, bar = 2)
foo <- mylist$foo
bar <- mylist$bar
This works in a function, too:
f <- function(mylist) {
list2env(mylist, environment())
foo * bar
}
mylist <- list(foo = 1, bar = 2)
f(mylist)
However, it is good practice to name the elements you want to include in the current environment, lest you override another object... and so write preferrably
list2env(mylist[c("foo", "bar")], environment())
Finally, if you want different names for the new imported objects, write:
list2env(`names<-`(mylist[c"foo", "bar"]), c("foo2", "bar2")), environment())
which is equivalent to
foo2 <- mylist$foo
bar2 <- mylist$bar
I want to assign multiple variables in a single line in R. Is it possible to do something like this?
values # initialize some vector of values
(a, b) = values[c(2,4)] # assign a and b to values at 2 and 4 indices of 'values'
Typically I want to assign about 5-6 variables in a single line, instead of having multiple lines. Is there an alternative?
I put together an R package zeallot to tackle this very problem. zeallot includes an operator (%<-%) for unpacking, multiple, and destructuring assignment. The LHS of the assignment expression is built using calls to c(). The RHS of the assignment expression may be any expression which returns or is a vector, list, nested list, data frame, character string, date object, or custom objects (assuming there is a destructure implementation).
Here is the initial question reworked using zeallot (latest version, 0.0.5).
library(zeallot)
values <- c(1, 2, 3, 4) # initialize a vector of values
c(a, b) %<-% values[c(2, 4)] # assign `a` and `b`
a
#[1] 2
b
#[1] 4
For more examples and information one can check out the package vignette.
There is a great answer on the Struggling Through Problems Blog
This is taken from there, with very minor modifications.
USING THE FOLLOWING THREE FUNCTIONS
(Plus one for allowing for lists of different sizes)
# Generic form
'%=%' = function(l, r, ...) UseMethod('%=%')
# Binary Operator
'%=%.lbunch' = function(l, r, ...) {
Envir = as.environment(-1)
if (length(r) > length(l))
warning("RHS has more args than LHS. Only first", length(l), "used.")
if (length(l) > length(r)) {
warning("LHS has more args than RHS. RHS will be repeated.")
r <- extendToMatch(r, l)
}
for (II in 1:length(l)) {
do.call('<-', list(l[[II]], r[[II]]), envir=Envir)
}
}
# Used if LHS is larger than RHS
extendToMatch <- function(source, destin) {
s <- length(source)
d <- length(destin)
# Assume that destin is a length when it is a single number and source is not
if(d==1 && s>1 && !is.null(as.numeric(destin)))
d <- destin
dif <- d - s
if (dif > 0) {
source <- rep(source, ceiling(d/s))[1:d]
}
return (source)
}
# Grouping the left hand side
g = function(...) {
List = as.list(substitute(list(...)))[-1L]
class(List) = 'lbunch'
return(List)
}
Then to execute:
Group the left hand side using the new function g()
The right hand side should be a vector or a list
Use the newly-created binary operator %=%
# Example Call; Note the use of g() AND `%=%`
# Right-hand side can be a list or vector
g(a, b, c) %=% list("hello", 123, list("apples, oranges"))
g(d, e, f) %=% 101:103
# Results:
> a
[1] "hello"
> b
[1] 123
> c
[[1]]
[1] "apples, oranges"
> d
[1] 101
> e
[1] 102
> f
[1] 103
Example using lists of different sizes:
Longer Left Hand Side
g(x, y, z) %=% list("first", "second")
# Warning message:
# In `%=%.lbunch`(g(x, y, z), list("first", "second")) :
# LHS has more args than RHS. RHS will be repeated.
> x
[1] "first"
> y
[1] "second"
> z
[1] "first"
Longer Right Hand Side
g(j, k) %=% list("first", "second", "third")
# Warning message:
# In `%=%.lbunch`(g(j, k), list("first", "second", "third")) :
# RHS has more args than LHS. Only first2used.
> j
[1] "first"
> k
[1] "second"
Consider using functionality included in base R.
For instance, create a 1 row dataframe (say V) and initialize your variables in it. Now you can assign to multiple variables at once V[,c("a", "b")] <- values[c(2, 4)], call each one by name (V$a), or use many of them at the same time (values[c(5, 6)] <- V[,c("a", "b")]).
If you get lazy and don't want to go around calling variables from the dataframe, you could attach(V) (though I personally don't ever do it).
# Initialize values
values <- 1:100
# V for variables
V <- data.frame(a=NA, b=NA, c=NA, d=NA, e=NA)
# Assign elements from a vector
V[, c("a", "b", "e")] = values[c(2,4, 8)]
# Also other class
V[, "d"] <- "R"
# Use your variables
V$a
V$b
V$c # OOps, NA
V$d
V$e
here is my idea. Probably the syntax is quite simple:
`%tin%` <- function(x, y) {
mapply(assign, as.character(substitute(x)[-1]), y,
MoreArgs = list(envir = parent.frame()))
invisible()
}
c(a, b) %tin% c(1, 2)
gives like this:
> a
Error: object 'a' not found
> b
Error: object 'b' not found
> c(a, b) %tin% c(1, 2)
> a
[1] 1
> b
[1] 2
this is not well tested though.
A potentially dangerous (in as much as using assign is risky) option would be to Vectorize assign:
assignVec <- Vectorize("assign",c("x","value"))
#.GlobalEnv is probably not what one wants in general; see below.
assignVec(c('a','b'),c(0,4),envir = .GlobalEnv)
a b
0 4
> b
[1] 4
> a
[1] 0
Or I suppose you could vectorize it yourself manually with your own function using mapply that maybe uses a sensible default for the envir argument. For instance, Vectorize will return a function with the same environment properties of assign, which in this case is namespace:base, or you could just set envir = parent.env(environment(assignVec)).
As others explained, there doesn't seem to be anything built in. ...but you could design a vassign function as follows:
vassign <- function(..., values, envir=parent.frame()) {
vars <- as.character(substitute(...()))
values <- rep(values, length.out=length(vars))
for(i in seq_along(vars)) {
assign(vars[[i]], values[[i]], envir)
}
}
# Then test it
vals <- 11:14
vassign(aa,bb,cc,dd, values=vals)
cc # 13
One thing to consider though is how to handle the cases where you e.g. specify 3 variables and 5 values or the other way around. Here I simply repeat (or truncate) the values to be of the same length as the variables. Maybe a warning would be prudent. But it allows the following:
vassign(aa,bb,cc,dd, values=0)
cc # 0
list2env(setNames(as.list(rep(2,5)), letters[1:5]), .GlobalEnv)
Served my purpose, i.e., assigning five 2s into first five letters.
Had a similar problem recently and here was my try using purrr::walk2
purrr::walk2(letters,1:26,assign,envir =parent.frame())
https://stat.ethz.ch/R-manual/R-devel/library/base/html/list2env.html:
list2env(
list(
a=1,
b=2:4,
c=rpois(10,10),
d=gl(3,4,LETTERS[9:11])
),
envir=.GlobalEnv
)
If your only requirement is to have a single line of code, then how about:
> a<-values[2]; b<-values[4]
I'm afraid that elegent solution you are looking for (like c(a, b) = c(2, 4)) unfortunatelly does not exist. But don't give up, I'm not sure! The nearest solution I can think of is this one:
attach(data.frame(a = 2, b = 4))
or if you are bothered with warnings, switch them off:
attach(data.frame(a = 2, b = 4), warn = F)
But I suppose you're not satisfied with this solution, I wouldn't be either...
R> values = c(1,2,3,4)
R> a <- values[2]; b <- values[3]; c <- values[4]
R> a
[1] 2
R> b
[1] 3
R> c
[1] 4
Another version with recursion:
let <- function(..., env = parent.frame()) {
f <- function(x, ..., i = 1) {
if(is.null(substitute(...))){
if(length(x) == 1)
x <- rep(x, i - 1);
stopifnot(length(x) == i - 1)
return(x);
}
val <- f(..., i = i + 1);
assign(deparse(substitute(x)), val[[i]], env = env);
return(val)
}
f(...)
}
example:
> let(a, b, 4:10)
[1] 4 5 6 7 8 9 10
> a
[1] 4
> b
[1] 5
> let(c, d, e, f, c(4, 3, 2, 1))
[1] 4 3 2 1
> c
[1] 4
> f
[1] 1
My version:
let <- function(x, value) {
mapply(
assign,
as.character(substitute(x)[-1]),
value,
MoreArgs = list(envir = parent.frame()))
invisible()
}
example:
> let(c(x, y), 1:2 + 3)
> x
[1] 4
> y
[1]
Combining some of the answers given here + a little bit of salt, how about this solution:
assignVec <- Vectorize("assign", c("x", "value"))
`%<<-%` <- function(x, value) invisible(assignVec(x, value, envir = .GlobalEnv))
c("a", "b") %<<-% c(2, 4)
a
## [1] 2
b
## [1] 4
I used this to add the R section here: http://rosettacode.org/wiki/Sort_three_variables#R
Caveat: It only works for assigning global variables (like <<-). If there is a better, more general solution, pls. tell me in the comments.
For a named list, use
list2env(mylist, environment())
For instance:
mylist <- list(foo = 1, bar = 2)
list2env(mylist, environment())
will add foo = 1, bar = 2 to the current environement, and override any object with those names. This is equivalent to
mylist <- list(foo = 1, bar = 2)
foo <- mylist$foo
bar <- mylist$bar
This works in a function, too:
f <- function(mylist) {
list2env(mylist, environment())
foo * bar
}
mylist <- list(foo = 1, bar = 2)
f(mylist)
However, it is good practice to name the elements you want to include in the current environment, lest you override another object... and so write preferrably
list2env(mylist[c("foo", "bar")], environment())
Finally, if you want different names for the new imported objects, write:
list2env(`names<-`(mylist[c"foo", "bar"]), c("foo2", "bar2")), environment())
which is equivalent to
foo2 <- mylist$foo
bar2 <- mylist$bar