I use cyberduck for SFTP my website files to the server. Dreamhost is the server.
In setting up a new bookmark in cyberduck I received this error "Connection failed - EOF while reading packet." [end of file]
The website is up and working fine, http://ce-t.org
Initially I thought this error had to do with the connection opening with cyberduck. So I setup a different bookmark to test and was able to do without a problem.
I have also deleted my first attempt to setup and reset up. This did not alter anything.
Now after doing more reading, may be in one of the website files?
As you can see i am a novice.
Help appreciated.
Usually when I run into this issue, its because my pw has expired.
Try SSHing into the server and change/update your pw. After I change it, I can FTP in.
This is 3 years too late for the OP. But I had this error when trying to make an SFTP connection to hosting on a Plesk server and the solution was to:
Enable the 'Access to the server over SSH' setting for the ftp user via the Plesk Control panel.
Of course you might need to contact your hosting service to get this done if you are not managing your own server.
In my case the same error occurred due to a syntax error in the .bashrc file on the remote server.
Also note that the default account setting for an FTP user at Dreamhost might specify an FTP connection. If so, trying to use Cyberduck to connect via SFTP will generate this error message. You can use the Dreamhost control panel to edit the user's record to specify SFTP.
In my case I have used dropbear ssh server.
I replace this server with openssh server, and now i can open the sftp connection without any issues.
Related
I have a WordPress site hosted on Google Cloud, and was working very well.
With no apparent motive, stoped working and I can't access to it, neither the front panel or admin panel.
I can't access via FTP o SSH console.
The VM on Google cloud still running as far as I can see.
Errors I get:
When trying to access de website on Google Chrome:
ERR_CONNECTION_TIMED_OUT
When trying to access FTP via FileZilla:
Error: Connection timed out after 20 seconds of inactivity
Error: Could not connect to server
When trying to access SSH:
Connection via Cloud Identity-Aware Proxy Failed Code: 4003 Reason:
failed to connect to backend You may be able to connect without using
the Cloud Identity-Aware Proxy.
i just want to update this issue.
The problem was that the memory quota.
I've increased the amounth of memory, restarted de VM and all went back to work.
Thanks
This page with SSH troubleshooting steps might be able to help you.
The issue could be solved by trying these troubleshooting steps. I think it is likely that the first one might be the cause of your issue since you mentioned it did work before.
Does the instance have a full disk? Try to expand it!
Is the firewall correctly setup, check your firewall rules and ensure that the default-allow-ssh rule is present.
Check your IAM permissions, do you have the roles required to connect to the VM?
Enable the serial console from your instance settings, connect and review the logs, they might give you some useful insights.
Our file transfer automation software is connecting to an external SFTP server to download files. It's connecting using Putty's command line tool PSFTP. When it kicks off at it's scheduled time, an error results. The error is:
Remote working directory is /directory
lcd: unable to change directory: Invalid Signature.
Using username "username".
Pre-authentication banner message from server:
| IM CCaaS FTP server
End of banner message from server
When I manually FTP to the server, I can log in with no issue. I then re-run the job and it completes successfully. I've googled this and found articles on key exchanges with similar errors, but this connection isn't using private/public keys. I cut over the application to a new Windows 2016 server on September 21st. There have been some successful transfers. I've also read the version of PSFTP may be the issue (0.73), but I would have expected consistent issues connecting. It seems sporadic. I'm not sure if the issue is on my end or at the destination. Any thoughts?
This is not SFTP problem. You have problem when changing a local working directory (using lcd command in the sftp client).
So this probably covers the problem:
System error 2148073478, extended error, or Invalid Signature error message on SMB connections in Windows Server 2012 or Windows 8.
I have a localhost website that I was testing and today I got "Error Establishing Database Connection" so I changed the port number from 80 to 8080 but it's not working and I got this 404 error:
I saw some people mention that I need to edit wp-config.php but Filezilla would not connect to the server either. I am a pretty beginner. Is there any good solution that I can follow or anywhere that I ask for help, hopefully not so expensive?
Thank you.
If you changed server port you should visit protocol://host:port/ try to visit http://localhost:8080/wordpress
First thing is first, If you have a database connection issue, please change your port back to the default port 80 (This port is used by browsers to receive unencrypted content over the internet. Currently your new URL would be as Mehmet said "http://localhost:8080/wordpress/" which won't solve your problem).
Now to solve the database connection issue, please locate your logs file. For wordpress this is located in the root directory of your wordpress site. I would assume C:\inetpub\wwwroot\wordpress\error.log unless you moved your error log. This will tell you what is really wrong with your database connection. It could be a username/password mismatch. Read/Write permissions missing, SQL server crashed/(is not running) or even a corrupted or deleted database.
As for the wp-config.php file, it will be located at C:\inetpub\wwwroot\wordpress\wp-config.php
I am trying out Eldos's SFTP Net Drive to map a drive to a virtual Ubuntu server. I works great when authenticating with a password. I have tried the normal/typical methods for configuring Key-based access. However, I receive error 10058. I have searched for clear instructions without success.
Anyone using this with Key-based access? Please share how you have it configured.
Thank you :)
If you're connecting via command line (e.g. using "open /profile:server" command line arguments) and you're accessing recently reinstalled server, the connection will silently fail because of changed server ssh fingerprint.
Try to reconnect manually (not using command line), accept new fingerprint and the problem will resolve.
This is because the server doesn't accept the key for whatever reason and closes connection. Usually this is an indicator of buggy server which normally should send the error packet in response.
But your question is offtopic here on StackOverflow.
I just got IIS7 set up on a Windows Server 2008 R2 machine in VirtualBox. After doing so, I could not connect from any other client, though http://localhost worked. For that matter, I was unable to even ping the server.
After doing some research, I found that enabling File and Print Sharing on the server solved the problem, but surely there has to be a better way, and I would much prefer to learn to use the best method, rather than the easiest one.
What, specifically, should I do to enable both pinging of the server as well as access to the web server running on it?
Isn't it that the inbound web HTTP port is blocked by default? I'm not a server guru but can remember going to the firewall to allow it through. Should already be there.
Out of the box on Windows Server 2008/2008R2 firewall is installed and users cannot access resources or services on the server unless you configure exceptions to the firewall. There is one exception to this are services/resources on this server that you make available through the GUI tools (Initial Configuration Tasks Wizard, Server manager) - these automatically create firewall required exceptions for you.
So in your case either upon File and Print Sharing installation or upon using File and Print Sharing config wizard/Shared resource provision wizard (most likely the later) required firewall exception was created for you. The rule in question is: File and Printer Sharing (Echo Request – ICMPv4-In) - actually allows ping, but I guess Windows also uses it for network resources discovery and other things implied by the role you installed.
Nothing prevents you from not enabling File and Print Sharing and just enabling mentioned firewall exception manually.