when i post the data using POST method in woocommerce api. i am getting cors issue
Access to fetch at 'http://localhost/wordpress/wc-api/v3/customers?oauth_consumer_key=ck_64d88e1fa3516e9f5a06b6053f02976a534d3f8f&oauth_nonce=zsu3ysEnFHhvrZt4Nc7H66Dgu28H20K7&oauth_signature_method=HMAC-SHA256&oauth_timestamp=1562587817&oauth_version=1.0&oauth_signature=KtFxvyQNklUlfCi6rNWyJ0DEJ6AS2ZbwbO44u%2FEqxG4%3D' from origin 'http://localhost:8100' has been blocked by CORS policy: Response to preflight request doesn't pass access control check: It does not have HTTP ok status.
You have to set a Access-Control-Allow-Origin header on each request to the server, if your server is on a different domain than the app on which you are making those requests (the server sets it as a response header). Adding that header tells the system that the external domain "localhost:8100" is allowed to make those requests.
You cannot circumvent this requirement in vanilla browsers, because it is a built in security feature to reduce CORS attacks
PS. different ports on the same domain are considered to be different domains. Thus example.com will get a 401 error, if you are making a request to example.com:8100. Same goes for localhost, or any other domain.
Example code from an Apache2 web server .conf file, that I personally use to set these headers.
SetEnvIf Origin "^http(s)?://(.+\.)?(staging.\xxx\.com|xxx\.com|xxx\.local|xxx\.local:4200|a2\.local)$" origin_is=$0
Header always set Access-Control-Allow-Origin %{origin_is}e env=origin_is
Just replace the xxx.com domains with localhost:8100 or whatever else you need in that array. (if you are using Apache web server)
As a result, the Chrome network tab should have an Access-Control-Allow-Origin header on attached to the request
MDN says, when the credentials like cookies, authorisation header or TLS client certificates has to be exchanged between sites Access-Control-Allow-Crendentials has to be set to true.
Consider two sites A - https://example1.xyz.com and another one is B- https://example2.xyz.com. Now I have to make a http Get request from A to B. When I request B from A I am getting,
"No 'Access-Control-Allow-Origin' header is present on the requested
resource. Origin 'http://example1.xyz.com' is therefore not allowed
access."
So, I'm adding the following response headers in B
response.setHeader("Access-Control-Allow-Origin", request.getHeader("origin"));
This resolves the same origin error and I'm able to request to B. When and why should I set
response.setHeader("Access-Control-Allow-Credentials", "true");
When I googled to resolve this same-origin error, most of them recommended using both headers. I'm not clear about using the second one Access-Control-Allow-Credentials.
When should I use both?
Why should I set Access-Control-Allow-Origin to origin obtained from request header rather than wildcard *?
Please quote me an example to understand it better.
Allow-Credentials would be needed if you want the request to also be able to send cookies. If you needed to authorize the incoming request, based off a session ID cookie would be a common reason.
Setting a wildcard allows any site to make requests to your endpoint. Setting allow to origin is common if the request matches a whitelist you've defined. Some browsers will cache the allow response, and if you requested the same content from another domain as well, this could cause the request to be denied.
Setting Access-Control-Allow-Credentials: true actually has two effects:
Causes the browser to actually allow your frontend JavaScript code to access the response if credentials are included
Causes any Set-Cookie response header to actually have the effect of setting a cookie (the Set-Cookie response header is otherwise ignored)
Those effects combine with the effect that setting XMLHttpRequest.withCredentials or credentials: 'include' (Fetch API) have of causing credentials (HTTP cookies, TLS client certificates, and authentication entries) to actually be included as part of the request.
https://fetch.spec.whatwg.org/#example-cors-with-credentials has a good example.
Why should I set Access-Control-Allow-Origin to origin obtained from request header rather than wildcard *?
You shouldn’t unless you’re very certain what you’re doing.
It’s actually safe to do if:
The resource for which you’re setting the response headers that way is a public site or API endpoint intended to be accessible by everyone, and
You’re just not setting cookies that could enable an attacker to get access to sensitive information or confidential data.
For example, if your server code is just setting cookies just for the purpose of saving application state or session state as a convenience to your users, then there’s no risk in taking the value of the Origin request header and reflecting/echoing it back in the Access-Control-Allow-Origin value while also sending the Access-Control-Allow-Credentials: true response header.
On the other hand, if the cookies you’re setting expose sensitive information or confidential data, then unless you’re really certain you have things otherwise locked down (somehow…) you really want to avoid reflecting the Origin back in the Access-Control-Allow-Origin value (without checking it on the server side) while also sending Access-Control-Allow-Credentials: true.
If you do that, you’re potentially exposing sensitive information or confidential data in way that could allow malicious attackers to get to it. For an explanation of the risks, read the following:
https://web-in-security.blogspot.jp/2017/07/cors-misconfigurations-on-large-scale.html
http://blog.portswigger.net/2016/10/exploiting-cors-misconfigurations-for.html
And if the resource you’re sending the CORS headers for is not a public site or API endpoint intended to be accessible by everyone but is instead inside an intranet or otherwise behind some IP-address-restricted firewall, then you definitely really want to avoid combining Access-Control-Allow-Origin-reflects-Origin and Access-Control-Allow-Credentials: true. (In the intranet case you almost always want to only be allowing specific hardcoded/whitelisted origins.)
We can set and allow cross-origin-resource-sharing for
All domains , Specific domains and Not allow for any domains
But I wonder allowing CORS for specific domains meaningful.
If a hacker knows the domains that server allows. (e.g www.facebook.com)
Hacker can fake the origin header in the request as www.facebook.com
Thus, in the perspective of security. I think only Allow all domains and Not allow for any domains are meaningful. Since it is very easy to fake the origin of the requester
Am I right??
Browsers are where CORS restrictions are enforced. And browsers know the real origin a script runs in. That’s how they work. If they didn’t, there would be zero security on the Web.
So browsers do CORS checks against what they know to be the real origin of the JavaScript code that’s making an XHR or fetch() request—not against the value of the Origin header.
And browsers are what set the Origin request header and send it over the network to begin with. Browsers set the Origin value based on what they know to be the real origin, and not for their own use—because they already know what the origin is and that value is what they use internally.
So even if you manage to change an Origin header a browser sends over the network, that won’t matter to the browser—it’s going to ignore that value and continue checking against the real origin.
More details
As far as CORS goes, servers just send back documents, with an Access-Control-Allow-Origin header and other CORS headers, to any client that requests them.
Consider if you use curl or something to request a document from a server: The server doesn’t check the Origin header and refuse to send the document if the requesting origin doesn’t match the Access-Control-Allow-Origin header. The server sends the response regardless.
And as far as clients go, curl and non-browser tools don’t have the concept of an origin to begin with and so don’t usually send any Origin header to begin with. You can make curl send one—with any value you want—but it’s pointless because servers don’t care what the value is.
And curl, etc., don’t check the value of the Access-Control-Allow-Origin response header the server sends, and refuse to get a document if the request’s Origin header doesn’t match the Access-Control-Allow-Origin header in the server response. They just get the document.
But browsers are different. Browser engines are really the only clients that have the notion of an origin to begin with, and that know the actual origin a Web application’s JavaScript is running in.
And unlike curl, etc., browsers will not let your script get a document if the XHR or fetch() call requesting it is from an origin not allowed in the server’s Access-Control-Allow-Origin header.
And again, the way browsers determine what the origin is by already knowing what the origin is, not based on the value of whatever Origin request header might end up getting sent in the request.
I am building a web API. I found whenever I use Chrome to POST, GET to my API, there is always an OPTIONS request sent before the real request, which is quite annoying. Currently, I get the server to ignore any OPTIONS requests. Now my question is what's good to send an OPTIONS request to double the server's load? Is there any way to completely stop the browser from sending OPTIONS requests?
edit 2018-09-13: added some precisions about this pre-flight request and how to avoid it at the end of this reponse.
OPTIONS requests are what we call pre-flight requests in Cross-origin resource sharing (CORS).
They are necessary when you're making requests across different origins in specific situations.
This pre-flight request is made by some browsers as a safety measure to ensure that the request being done is trusted by the server.
Meaning the server understands that the method, origin and headers being sent on the request are safe to act upon.
Your server should not ignore but handle these requests whenever you're attempting to do cross origin requests.
A good resource can be found here http://enable-cors.org/
A way to handle these to get comfortable is to ensure that for any path with OPTIONS method the server sends a response with this header
Access-Control-Allow-Origin: *
This will tell the browser that the server is willing to answer requests from any origin.
For more information on how to add CORS support to your server see the following flowchart
http://www.html5rocks.com/static/images/cors_server_flowchart.png
edit 2018-09-13
CORS OPTIONS request is triggered only in somes cases, as explained in MDN docs:
Some requests don’t trigger a CORS preflight. Those are called “simple requests” in this article, though the Fetch spec (which defines CORS) doesn’t use that term. A request that doesn’t trigger a CORS preflight—a so-called “simple request”—is one that meets all the following conditions:
The only allowed methods are:
GET
HEAD
POST
Apart from the headers set automatically by the user agent (for example, Connection, User-Agent, or any of the other headers with names defined in the Fetch spec as a “forbidden header name”), the only headers which are allowed to be manually set are those which the Fetch spec defines as being a “CORS-safelisted request-header”, which are:
Accept
Accept-Language
Content-Language
Content-Type (but note the additional requirements below)
DPR
Downlink
Save-Data
Viewport-Width
Width
The only allowed values for the Content-Type header are:
application/x-www-form-urlencoded
multipart/form-data
text/plain
No event listeners are registered on any XMLHttpRequestUpload object used in the request; these are accessed using the XMLHttpRequest.upload property.
No ReadableStream object is used in the request.
Have gone through this issue, below is my conclusion to this issue and my solution.
According to the CORS strategy (highly recommend you read about it) You can't just force the browser to stop sending OPTIONS request if it thinks it needs to.
There are two ways you can work around it:
Make sure your request is a "simple request"
Set Access-Control-Max-Age for the OPTIONS request
Simple request
A simple cross-site request is one that meets all the following conditions:
The only allowed methods are:
GET
HEAD
POST
Apart from the headers set automatically by the user agent (e.g. Connection, User-Agent, etc.), the only headers which are allowed to be manually set are:
Accept
Accept-Language
Content-Language
Content-Type
The only allowed values for the Content-Type header are:
application/x-www-form-urlencoded
multipart/form-data
text/plain
A simple request will not cause a pre-flight OPTIONS request.
Set a cache for the OPTIONS check
You can set a Access-Control-Max-Age for the OPTIONS request, so that it will not check the permission again until it is expired.
Access-Control-Max-Age gives the value in seconds for how long the response to the preflight request can be cached for without sending another preflight request.
Limitation Noted
For Chrome, the maximum seconds for Access-Control-Max-Age is 600 which is 10 minutes, according to chrome source code
Access-Control-Max-Age only works for one resource every time, for example, GET requests with same URL path but different queries will be treated as different resources. So the request to the second resource will still trigger a preflight request.
Please refer this answer on the actual need for pre-flighted OPTIONS request: CORS - What is the motivation behind introducing preflight requests?
To disable the OPTIONS request, below conditions must be satisfied for ajax request:
Request does not set custom HTTP headers like 'application/xml' or 'application/json' etc
The request method has to be one of GET, HEAD or POST. If POST, content type should be one of application/x-www-form-urlencoded, multipart/form-data, or text/plain
Reference:
https://developer.mozilla.org/en-US/docs/Web/HTTP/Access_control_CORS
When you have the debug console open and the Disable Cache option turned on, preflight requests will always be sent (i.e. before each and every request). if you don't disable the cache, a pre-flight request will be sent only once (per server)
Yes it's possible to avoid options request. Options request is a preflight request when you send (post) any data to another domain. It's a browser security issue. But we can use another technology: iframe transport layer. I strongly recommend you forget about any CORS configuration and use readymade solution and it will work anywhere.
Take a look here:
https://github.com/jpillora/xdomain
And working example:
http://jpillora.com/xdomain/
For a developer who understands the reason it exists but needs to access an API that doesn't handle OPTIONS calls without auth, I need a temporary answer so I can develop locally until the API owner adds proper SPA CORS support or I get a proxy API up and running.
I found you can disable CORS in Safari and Chrome on a Mac.
Disable same origin policy in Chrome
Chrome: Quit Chrome, open an terminal and paste this command: open /Applications/Google\ Chrome.app --args --disable-web-security --user-data-dir
Safari: Disabling same-origin policy in Safari
If you want to disable the same-origin policy on Safari (I have 9.1.1), then you only need to enable the developer menu, and select "Disable Cross-Origin Restrictions" from the develop menu.
As mentioned in previous posts already, OPTIONS requests are there for a reason. If you have an issue with large response times from your server (e.g. overseas connection) you can also have your browser cache the preflight requests.
Have your server reply with the Access-Control-Max-Age header and for requests that go to the same endpoint the preflight request will have been cached and not occur anymore.
I have solved this problem like.
if($_SERVER['REQUEST_METHOD'] == 'OPTIONS' && ENV == 'devel') {
header('Access-Control-Allow-Origin: *');
header('Access-Control-Allow-Headers: X-Requested-With');
header("HTTP/1.1 200 OK");
die();
}
It is only for development. With this I am waiting 9ms and 500ms and not 8s and 500ms. I can do that because production JS app will be on the same machine as production so there will be no OPTIONS but development is my local.
You can't but you could avoid CORS using JSONP.
you can also use a API Manager (like Open Sources Gravitee.io) to prevent CORS issues between frontend app and backend services by manipulating headers in preflight.
Header used in response to a preflight request to indicate which HTTP headers can be used when making the actual request :
content-type
access-control-allow-header
authorization
x-requested-with
and specify the "allow-origin" = localhost:4200 for example
After spending a whole day and a half trying to work through a similar problem I found it had to do with IIS.
My Web API project was set up as follows:
// WebApiConfig.cs
public static void Register(HttpConfiguration config)
{
var cors = new EnableCorsAttribute("*", "*", "*");
config.EnableCors(cors);
//...
}
I did not have CORS specific config options in the web.config > system.webServer node like I have seen in so many posts
No CORS specific code in the global.asax or in the controller as a decorator
The problem was the app pool settings.
The managed pipeline mode was set to classic (changed it to integrated) and the Identity was set to Network Service (changed it to ApplicationPoolIdentity)
Changing those settings (and refreshing the app pool) fixed it for me.
OPTIONS request is a feature of web browsers, so it's not easy to disable it. But I found a way to redirect it away with proxy. It's useful in case that the service endpoint just cannot handle CORS/OPTIONS yet, maybe still under development, or mal-configured.
Steps:
Setup a reverse proxy for such requests with tools of choice (nginx, YARP, ...)
Create an endpoint just to handle the OPTIONS request. It might be easier to create a normal empty endpoint, and make sure it handles CORS well.
Configure two sets of rules for the proxy. One is to route all OPTIONS requests to the dummy endpoint above. Another to route all other requests to actual endpoint in question.
Update the web site to use proxy instead.
Basically this approach is to cheat browser that OPTIONS request works. Considering CORS is not to enhance security, but to relax the same-origin policy, I hope this trick could work for a while. :)
One solution I have used in the past - lets say your site is on mydomain.com, and you need to make an ajax request to foreigndomain.com
Configure an IIS rewrite from your domain to the foreign domain - e.g.
<rewrite>
<rules>
<rule name="ForeignRewrite" stopProcessing="true">
<match url="^api/v1/(.*)$" />
<action type="Rewrite" url="https://foreigndomain.com/{R:1}" />
</rule>
</rules>
</rewrite>
on your mydomain.com site - you can then make a same origin request, and there's no need for any options request :)
It can be solved in case of use of a proxy that intercept the request and write the appropriate headers.
In the particular case of Varnish these would be the rules:
if (req.http.host == "CUSTOM_URL" ) {
set resp.http.Access-Control-Allow-Origin = "*";
if (req.method == "OPTIONS") {
set resp.http.Access-Control-Max-Age = "1728000";
set resp.http.Access-Control-Allow-Methods = "GET, POST, PUT, DELETE, PATCH, OPTIONS";
set resp.http.Access-Control-Allow-Headers = "Authorization,Content-Type,Accept,Origin,User-Agent,DNT,Cache-Control,X-Mx-ReqToken,Keep-Alive,X-Requested-With,If-Modified-Since";
set resp.http.Content-Length = "0";
set resp.http.Content-Type = "text/plain charset=UTF-8";
set resp.status = 204;
}
}
What worked for me was to import "github.com/gorilla/handlers" and then use it this way:
router := mux.NewRouter()
router.HandleFunc("/config", getConfig).Methods("GET")
router.HandleFunc("/config/emcServer", createEmcServers).Methods("POST")
headersOk := handlers.AllowedHeaders([]string{"X-Requested-With", "Content-Type"})
originsOk := handlers.AllowedOrigins([]string{"*"})
methodsOk := handlers.AllowedMethods([]string{"GET", "HEAD", "POST", "PUT", "OPTIONS"})
log.Fatal(http.ListenAndServe(":" + webServicePort, handlers.CORS(originsOk, headersOk, methodsOk)(router)))
As soon as I executed an Ajax POST request and attaching JSON data to it, Chrome would always add the Content-Type header which was not in my previous AllowedHeaders config.
I have very basic question regarding the "Access-Control-Allow-Origin" header.
Assume that we have a website "www.siteA.com" that will be doing the CORS to another site "www.siteB.com" and the "Access-Control-Allow-Origin" on siteB is set as "www.siteC.com" only.
When user via browser access siteA and it tries accessing content from siteB, what will the response look like?
Will the request be blocked at the server level
or
will it send the entire response with "Access-Control-Allow-Origin" header set to "www.siteC.com" and will be blocked by user's browser? (i think the first is the correct one)
When user via browser access siteA and it tries accessing content from siteB, what will the response look like?
The same as any other response from the site.
Will the request be blocked at the server level
No. CORS is an instruction to the browser that it should not apply the Same Origin Policy to the request. The server can't (reliably) tell where a request came from to block it at the server level.
will it send the entire response with "Access-Control-Allow-Origin" header set to "www.siteC.com" and will be blocked by user's browser?
Yes.
will be blocked by user's browser?
Yes, because only www.siteC.com domain can access the resource according to your Access-Control-Allow-Origin header. They would send back;
Access-Control-Allow-Origin: http://www.siteC.com
You can find answers the questions about the Access-Control-Allow-Origin header via this.