I have a error, how I solve this?
ERROR:The input is not a valid Base-64 string as it contains a non-base 64 character, more than two padding characters, or a non-white space character among the padding characters. what's meaning?
I just had this caused by an HTML-formatted email retrieved from a Lotus Notes server. It is likely that the email message you are accessing has a character in it that doesn't work with Base64. My email had one of the characters from this page in it as a phone number delimiter from a foreign country:
http://www.alt-codes.net/
Once I forwarded the email with that character removed, the component worked fine. Good luck!
In namespace OpenPop.Mime.Decode at class Base64:
After : base64Encoded = base64Encoded.Replace("\r\n", "");
Inset : if (base64Encoded.StartsWith("=")) base64Encoded = base64Encoded.Substring(1, base64Encoded.Length - 1);
Related
In our application, we are sending passwords as part of the header for authentication to our auth service. However, we're running into a situation where users are using non-ascii characters as part of their password, and I found out that non-ascii characters are not supported in HTTP.
What are some approaches to handling this?
You need to encode it in an ASCII compatible format.
Base 64 is such an encoding.
Here is an exemple of how they did it for the HTTP Basic Authentication using Base 64 encoding.
The Authorization field is constructed as follows:
The username and password are combined with a single colon (:). This means that the username itself cannot contain a colon.
The resulting string is encoded into an octet sequence. The character set to use for this encoding is by default unspecified, as long as it is compatible with US-ASCII, but the server may suggest use of UTF-8 by sending the charset parameter.
The resulting string is encoded using a variant of Base64.
The authorization method and a space (e.g. "Basic ") is then prepended to the encoded string.
For example, if the browser uses Aladdin as the username and OpenSesame as the password, then the field's value is the base64-encoding of Aladdin:OpenSesame, or QWxhZGRpbjpPcGVuU2VzYW1l. Then the Authorization header will appear as:
Authorization: Basic QWxhZGRpbjpPcGVuU2VzYW1l
So let's say your password is ǁǂǃDŽDždžLJLjljNJNjnjǍǎǏǐǑǒǓǔǕǖǗǘǙǚǛǜǝǞǟ, which cannot be represented using the ASCII charset.
Here is some pseudo code showing you how to do it
var password = 'ǁǂǃDŽDždžLJLjljNJNjnjǍǎǏǐǑǒǓǔǕǖǗǘǙǚǛǜǝǞǟ'
var base64EncodedPassword = base64Encode(password)
var httpHeader = new HttpHeader('Password', base64EncodedPassword)
And it would results in the following header. Represented using only ASCII char
Password: x4HHgseDx4THhceGx4fHiMeJx4rHi8eMx43HjsePx5DHkceSx5PHlMeVx5bHl8eYx5nHmsebx5zHnceex58=
whats the best practice to end a tcp message? I now have my own custom string of characters, but I am paranoid that in a case of blind luck, its possible to transmit something on the wire that can contain your end message chracater(s)/string .
SMTP servers take the enter key, but won't that freak out if a peace of text has "enters" in it and is transmitted on the wire?
I would like to get some ideas on this.
Thanks
If you are using a custom string as the end indicator, you must ensure that this end indicator won't appear in the message body, using some string escape techniques.
For example, if you are using "\r\n" as the end indicator, you must turn the "\r\n" in the message body to another form.
Can better use the length of message and pass it the beginning?
For example of text protocol seee here. Your problem solve it part
An encoded string is a string with the following encoding rules.
- Characters in the range [0x10 - 0xff] are encoded as itselves.
- A character in the range [0x00 - 0x0f] is prefixed by 0x01 and
shifted by 0x40. For example, 0x03 is encoded as 0x01 0x43.
I have an encrypted query string passed from another page, it reads something like "/se73j+sef" but after receiving it, the '+' sign got omitted and became "/se73j sef". Is this normal? Please kindly advice. Thanks.
Is this normal?
Yes, perfectly normal. + is a special character in an url. It means space (0x20 ASCII character). If you want to represent the + sign you will have to url encode it:
/se73j%2Bsef
To url encode a string in .NET you could use the UrlEncode method. Or depending on how you are building the url there are certainly better ways.
In some javascript, I have:
var url = "find.aspx?" + "location=" + encodeURIComponent( address );
alert( url );
location.href = url;
where the value of address is the string "Seattle, WA".
In the alert I see
find.aspx?Seattle%2C%20WA
as I expect.
But on the server side, when I look at Request.Url, the relevant substring I see is
find.aspx?Seattle, WA
And in the Firefox url window I see
find.aspx?location=Seattle%2C WA
So I'm getting three different representations whereas I would expect that in all three places I should see what I see in the alert. My expectation is that the url I assign to location.href should show up as-is in the browser url window, and should be passed as-is to the server in Request.Url (and I would need to decode the values on the server before using them). What's happening?
Firefox converts certain encoded characters into their literal forms as a way to be friendly to users. It will also convert spaces typed into the address bar into %20 for the server.
Update: The reason Firefox doesn't display the comma unencoded is because commas are allowed in URLs, but spaces are not, so it knows that a space is going to be unambiguously interpreted, whereas the pre-encoded comma is different from a non-encoded comma to some servers. see: Can I use commas in a URL?
ASP is probably trying to help you out by auto-un-encoding the string for you.
Update: It looks like ASP.NET unencodes Request.Url for you by default, as mentioned here: QueryString malformed after URLDecode They also mention that you can use HttpRequest.Url.Query to access the un-decoded version.
The alert is the only thing not doing any "magic" for you.
For the alert, you are doing the encoding yourself. Perhaps it looks the same as on the server-side if you removed encodeURIComponent.
On the server side, ASP.NET will always show you the unencoded form. This is to make it easier to directly map to files that also have text that needed to be (un)encoded.
Note that you can replace every letter for its UTF8 representation in URL Encoding. It will still be the same URL. I.e., type the following in the browser window and it will still work: %66%59%6E%64.aspx?location=Seattle%2C%20WA. To only encode the necessary chars, use UrlEncode on the server side if you create a link yourself.
URL encoding can become fairly tricky. You ask to explain it. To know the correct escape of a certain character, you need to know how that character looks in UTF8. The hexadecimal value of the UTF-8 bytes then become the %XX%YY value of your letter. Sometimes it's one %XX, but it can be up to six byte sequences in total (some Chinese characters for instance).
URL Encoding works one way only. Never double-encode or double-unencode. This is prohibited by the specification. Also, because you can encode any character, it is not always possible (as you found out) to do roundtrip encoding/unencoding. If you unencode and re-encode again, it is well possible that the resulting string is different, but syntactically the same.
In HTML, URL Encoding is sometimes interspersed with HTML Encoding. I.e., the ampersand is valid in HTML, but not in HTML. find.aspx?city=A&name=B becomes find.aspx?city=A&name=B in and HTML URL. However, browsers are lenient and will accept wrongly HTML-encoded strings.
Finally, a not on the browser: if you type in a space in a link, even inside an <a> tag, it will escape the space (or other character) for you. Likewise, it will nowadays show the odd characters (é, ï etc) in the address bar, but when it sends it over HTTP, the browser will correctly do the encoding for you.
Update: about anwering your question of needing a "definitive" reference or proof.
While I couldn't find any on the internet, I decided to look for it myself using Reflector. Going through the methods that set, for instance, the HttpRequest.QueryString, you quickly encounter the private method HttpRequest.FillInQueryStringCollection which then calls HttpValueCollection.FillfromEncodedBytes. Somewhat near the end of that method, HttpUtility.UrlDecode is called for the values. Conclusion: do not call it yourself, to prevent double decoding.
You can see this for yourself when you download Reflector and disassemble the .NET libs of System.Web.
For your example you can change this line
var url = "find.aspx?" + "location=" + encodeURIComponent( address );
to
var url = "find.aspx?" + "location=" + address;
and see the address as it is. Bu if address variable contains any '&' character your variable will be corrupt. So you are using encodeURIComponent to encode these things url.
On the Server side all these encoded strings are decoded back. It means encodeURIComponent is just for sending the address variable (whether it contains & character or not) to server side correctly.
I am passing an object from one asp.net page to another. I'm encoding the object as a Base64 string and passing it as a POST parameter. However, when the receiving page reads the POST value, if there is a + sign in the Base64 string, it is being replaced with a line break. For example:
...AABDEDS+DFEAED...
becomes
...AABDEDS
DFEAED...
I compared the Base64 string immediately after encoding in the sending page to the string immediately before decoding in the receiving page and that is the only difference. I tried HtmlEncoding() the base64 string prior to writing it to the request stream, but that had no effect, so it seems to be an issue on the receiving end.
Any ideas?
Use UrlEncode. The + is a reserved character and needs to be encoded.
When you pass the base64 string in the parameter, you need to URL Encode it (so the characters come across properly). Use:
System.Web.HttpServerUtility.UrlEncode(base64String);
HttpServer.UrlEncode Method (String)(System.Web)
the + symbol is a special URL character that on it's own evaluates to a space in the URL.
You'll need to Server.URLEncode your base64 string on one side (which will turn the Plus into a %2B and Server.URLDecode it on the other side