I have a store procedure which show single row value like
(x.CLTotalAc, x.CLTotalAmt,x.CLAc, x.CLAmt,x.CL,
y.GB_CLTotalAc,y.GB_CLTotalAmt, y.GB_CLAc, y.GB_CLAmt, y.GB_CL).
I want these value to my asp.net C# page under text box (txtCLTotalAmt,
txtCL, txtGB_CLTotalAmt, txtGB_CL)
Store Procedure
ALTER proc [dbo].[Cr_CL_Report]
#ProductName text,
#BranchName text
as
begin
Select x.CLTotalAc,x.CLTotalAmt,x.CLAc, x.CLAmt,x.CL,
y.GB_CLTotalAc,y.GB_CLTotalAmt, y.GB_CLAc, y.GB_CLAmt, y.GB_CL
from
(
SELECT COUNT(dbo.DDBranchName.BCode) AS BrCode,
dbo.TblTotalCL.CLProductName AS ProductName,
SUM(dbo.TblTotalCL.CLTotalAc) AS CLTotalAc,
SUM(dbo.TblTotalCL.CLTotalAmt) AS CLTotalAmt,
SUM(dbo.TblTotalCL.CLAc) AS CLAc, SUM(dbo.TblTotalCL.CLAmt) AS CLAmt,
SUM(dbo.TblTotalCL.CLAmt)/SUM(dbo.TblTotalCL.CLTotalAmt) * 100 AS CL
FROM dbo.DDBranchName INNER JOIN
dbo.TblTotalCL ON dbo.DDBranchName.BCode = dbo.TblTotalCL.CLbrCode
WHERE (dbo.TblTotalCL.CLAsOnDate IN
(SELECT MAX(CLAsOnDate) AS Expr1 FROM dbo.TblTotalCL AS TblTotalCL_1))
AND (dbo.TblTotalCL.CLProductName LIKE #ProductName)
AND (dbo.DDBranchName.BCode LIKE #BranchName)
GROUP BY dbo.TblTotalCL.CLProductName
) x
inner join
(
SELECT COUNT(dbo.DDBranchName.BCode) AS GB_BrCode,
dbo.TblTotalCL.CLProductName AS GB_ProductName,
SUM(dbo.TblTotalCL.CLTotalAc) AS GB_CLTotalAc,
SUM(dbo.TblTotalCL.CLTotalAmt) AS GB_CLTotalAmt,
SUM(dbo.TblTotalCL.CLAc) AS GB_CLAc,
SUM(dbo.TblTotalCL.CLAmt) AS GB_CLAmt,
(SUM(dbo.TblTotalCL.CLAmt) / SUM(dbo.TblTotalCL.CLTotalAmt))*100 AS GB_CL
FROM dbo.DDBranchName INNER JOIN
dbo.TblTotalCL ON dbo.DDBranchName.BCode = dbo.TblTotalCL.CLbrCode
WHERE (dbo.TblTotalCL.CLAsOnDate IN
(SELECT MAX(CLAsOnDate) AS Expr1 FROM dbo.TblTotalCL AS TblTotalCL_1))
AND (dbo.TblTotalCL.CLProductName LIKE #ProductName)
GROUP BY dbo.TblTotalCL.CLProductName
) y on
x.ProductName = y.GB_ProductName
end
Blockquote
how can I solve this?
Getting return value from stored procedure in C#
In the link you can see how to get the values form a stored procedure. Then assign the value to the text box
Start by reading up on Ado.net. Use for instance the example here,under adonet data provider examples/sqlclient. When you have this working you have retrieved the data from the database. (imho avoid table adapters, entity framework and linqtosql if you want to grok it. instead go with manually writing for SqlCommand. or dapper to ease some of the burden.)
Now you have to get it to the web page. First decide on Webforms or Aspnetmvc. Then googlewithbing what the syntax is like.
Wash.
Rinse.
Repeat.
HTH
Related
I just start using apex from few time. So I hope you'll forgive me if I ask things that are very simple.
I have a select list populated by a SQL Query, my SQL instruction is SELECT NUM, ID FROM TABLE.
I'd like to change the query dynamically adding a " WHERE NUM LIKE %myVar%", where "MyVar" is the test of a text Item, so I'd like to change the content of the select list pressing the button.
Is it possible?
thanks in advance for any answer.
I find a partial solution. I bind to select list a PL/SQL function returning a SQL Script and I add an text item called filter.
My function is:
declare
q varchar2(4000);
begin
q:='select numero, ';
q:=q||'id from t_doc ';
q:=q||'where numero = :FILTROPT';
return q;
end;
But if I use like with a percent in the function instead of "=", apex raise me an error.
Any suggestion?
I have set my column to int not null default 1... but whenever I save my record, it sets default value for that record to be 0.
I am not setting it anywhere. I don't know where I am making a mistake.
I have debugged my code , and when I am passing new entity object it is setting default value for not null to 0 .May be it is something with LINQ, But I don't know how to handle it.I don't want to explicitly assign value.
Thanks!
For sql-server, you can use SQL Server Profiler to catch all the scripts you run into the DB.
This may show you some details
Try running this query, replacing the 'myTable' and 'myColumn' values with your actual TABLE and COLUMN names, and see what's returned:
SELECT
OBJECT_NAME(C.object_id) AS [Table Name]
,C.Name AS [Column Name]
,DC.Name AS [Constraint Name]
,DC.Type_Desc AS [Constraint Type]
,DC.Definition AS [Default Value]
FROM sys.default_constraints DC
INNER JOIN sys.Columns C
ON DC.parent_column_id = C.column_id
AND DC.parent_object_id = C.object_id
WHERE OBJECT_NAME(DC.parent_object_id) = 'myTable'
AND COL_NAME(DC.parent_object_id,DC.parent_column_id) = 'myColumn'
;
Should return something like this:
[Table Name] [Column Name] [Constraint Name] [Constraint Type] [Default Value]
-------------------------------------------------------------------------------------------
myTable myColumn DF_myTable_myColumn DEFAULT_CONSTRAINT ('0')
If the [Default Value] returned is indeed (1), then it means that you have set the constraint properly and something else is at play here. It might be a trigger, or some other automated DML that you've forgotten/didn't know about, or something else entirely.
I am not the world's biggest fan of using a TRIGGER, but in a case like this, it could be handy. I find that one of the best uses for a TRIGGER is debugging little stuff like this - because it lets you see what values are being passed into a table without having to scroll through mountains of profiler data. You could try something like this (again, switching out the myTable and myColumn values with your actual table and column names):
CREATE TABLE Default_Check
(
Action_Time DATETIME NOT NULL DEFAULT GETDATE()
,Inserted_Value INT
);
CREATE TRIGGER Checking_Default ON myTable
AFTER INSERT, UPDATE
AS
BEGIN
INSERT INTO Default_Check (Inserted_Value)
SELECT I.myColumn
FROM Inserted I
;
END
;
This trigger would simply list the date/time of an update/insert done against your table, as well as the inserted value. After creating this, you could run a single INSERT statement, then check:
SELECT * FROM Default_Check;
If you see one row, only one action (insert/update) was done against the table. If you see two, something you don't expect is happening - you can check to see what. You will also see here when the 0 was inserted/updated.
When you're done, just make sure you DROP the trigger:
DROP TRIGGER Checking_Default;
You'll want to DROP the table, too, once it's become irrelevant:
DROP TABLE Default_Check;
If all of this still didn't help you, let me know.
In VB use
Property VariableName As Integer? = Nothing
And
In C# use
int? value = 0;
if (value == 0)
{
value = null;
}
Please check My Example:
create table emp ( ids int null, [DOJ] datetime NOT null)
ALTER TABLE [dbo].[Emp] ADD CONSTRAINT DF_Emp_DOJ DEFAULT (GETDATE()) FOR [DOJ]
1--Not working for Default Values
insert into emp
select '1',''
2 ---working for Default Values
insert into emp(ids) Values(13)
select * From emp
I'm sorry for the confusing title, but couldn't find another way to ask it.
Let's say I want to write a procedure add_salesline. I enter all the fields with parameters, except subtotal. Subtotal (just the price for the salesline) needs to be calculated based on fields in other tables such as productprice in the table products, pricereduction in the table promotion, etc. (based on the properties).
How can I do this? I've been trying to solve this problem for a good week now, and it's just not working...
Presumably one of the parameters passed to procedure add_salesline() is productid, or whatever. So you use that to SELECT products.productprice, promotion.pricereduction and whatever else you need to perform the calculation.
The purpose of writing a stored procedure is to associate several calls into a single program unit. So add_salesline() might look something like this (lots of caveats because your question is very light on details):
create or replace procedure add_salesline(
p_orderno in salesline.orderno%type
, p_salesqty in salesline.salesqty%type
, p_productid in products.productid%type
)
is
new_rec salesline%rowtype;
begin
new_rec.orderno := p_orderno;
new_rec.salesqty := p_salesqty;
new_rec.productid := p_productid;
select p_salesqty * (p.productprice * nvl(pp.pricereduction, 1))
into new_rec.subtotal
from products p
left outer join promotion pp
on pp.productid = p.productid
where p.productid = p_productid
;
insert into salesline
value new_rec;
end;
This code assumes pricereduction is a rate. If the value is an absolute discount the formula will be different (p.productprice - nvl(pp.pricereduction, 0)). Or if it's a replacement price: coalesce(pp.pricereduction, p.productprice).
I am trying to log all the changes to database but was unable to find a way to get current username to the trigger. I have triggerData table which stores the information of user
(guid (userid), data (username), logintime) these are inserted when user sign in.
Here is the trigger
declare #UserIsOnlineTimeWindow DateTime
declare #currenttime DateTime
set #currenttime = GETDATE()
set #UserIsOnlineTimeWindow = 10
DECLARE #uname nvarchar(max)
**set #uname = (SELECT T.UserName from (SELECT distinct u.UserName FROM aspnet_Users u
WHERE IsAnonymous = 'FALSE' AND ((#currenttime - #UserIsOnlineTimeWindow) < u.LastActivityDate)) as t,
TriggerData td, aspnet_Users au
WHERE t.UserName = td.Data and td.guid = au.UserId and td.logintime = (select MAX(td.logintime) from TriggerData td))**
DECLARE #ComputerName nvarchar(50)
DECLARE #IPAddr nvarchar(50)
DECLARE #BroadcastIP nvarchar(50)
DECLARE #auditInsert nvarchar(255)
SET #ComputerName = (SELECT ComputerName FROM inserted)
SET #IPAddr = (SELECT ISNULL(IPAddr,0) FROM inserted)
SET #BroadcastIP = (SELECT ISNULL(BroadcastIP,0) FROM inserted)
SET #auditInsert = #ComputerName+' '+#IPAddr+' '+#BroadcastIP
Begin
INSERT INTO Audit(OldInfo ,NewInfo,[User],Date1,Type,TableName) VALUES('New Record',#auditInsert, #uname ,GETDATE(),'Added','LabIP')
End
The query for the username does not give the currently modifying user instead it gives the recently logged in user. Any help is appreciated. Thanks!
Like marc_s said triggers can and will be applied once per batch. In your case however it sounds like your current application is only inserting once per batch so it's working fine. Your will have a problem however if anyone tries to insert more than one row. Say from another part of the application, or from a query window. It's really up to you if you want to fix it now or wait for it to break (if ever).
I've re-formated the query that is giving you problems.
set #uname = (SELECT T.UserName FROM
(SELECT DISTINCT u.UserName
FROM aspnet_Users u
WHERE IsAnonymous = 'FALSE'
AND ((#currenttime - #UserIsOnlineTimeWindow) < u.LastActivityDate)) AS t
JOIN TriggerData td
ON t.UserName = td.Data
JOIN aspnet_Users au
ON td.guid = au.UserId
WHERE td.logintime = (select MAX(td.logintime) from TriggerData td))
You can see from this where your problem is. If you look in the WHERE clause you will see that you are specifically pulling the row that last logged in. If you are not using an application id (although it sounds like you are) you can use USER_NAME() or SUSER_SNAME() to pull the current user. Unfortunatly based on the information you have provided I don't think you will be able to pull the user that actually made the change, again assuming that you are using an application id.
You might try putting the SPID (id for the current connection) into your users table. You can retrieve this as ##SPID. That way while you are in the current connection you will always be able to tell who the current user is. Of course this will only work if you are holding onto the connection for the whole time the user is logged in (probably not in a web based application).
Last (and unfortunatly least) is rather than using triggers create stored procedures to do your inserts. Pass in the current user into the SP as part of the parameter list and do your logging there.
Sorry I couldn't help more.
How can I put a table name dynamically in a query?
Suppose I have a query as shown below:
Select a.amount
,b.sal
,a.name
,b.address
from alloc a
,part b
where a.id=b.id;
In the above query I want to use a table dynamically (part b if the database is internal, p_part b if the database if external).
I have a function that returns which database it is. Suppose the function is getdatabase();
select decode(getdatabase(),'internal','part b','external','p_part b')
from dual;
How can I use this function in my main query to insert the table name dynamically into the query?
I don't want to implement this using the primitive way of by appending strings to make a final query and then open cursor with that string.
I don't want to implement this with primitive way of by appending
strings to make a final query and then open cursor with that string .
That's really the only way you can do it. It's not possible to use a variable or function call for the table name when using a regular PL/SQL SQL block, you have to use dynamic SQL.
Refer to Oracle documentation for more details:
http://docs.oracle.com/cd/B10500_01/appdev.920/a96590/adg09dyn.htm
Here's an example from the doc:
EXECUTE IMMEDIATE 'SELECT d.id, e.name
FROM dept_new d, TABLE(d.emps) e -- not allowed in static SQL
-- in PL/SQL
WHERE e.id = 1'
INTO deptid, ename;
You can do this without dynamic SQL, assuming both tables (part and p_part) are available at compile time:
select a.amount
,b.sal
,a.name
,b.address
from alloc a
,part b
where a.id=b.id
and (select getdatabase() from dual) = 'internal'
UNION ALL
select a.amount
,b.sal
,a.name
,b.address
from alloc a
,p_part b
where a.id=b.id
and (select getdatabase() from dual) = 'external'
;
I've put the function call in a subquery so that it is run only once per call (i.e. twice, in this instance).