I have a div called main content, inside this div is another div called slideup. Using CSS animation, when you hover over the main content div, the slide up div slides up from the bottom to 50% height. This can be seen in my css code below
.maincontentdiv {
position: relative;
height: 100px;
width: 100%;
}
.slideup {
position: absolute;
width: 100%;
bottom: -2px;
min-height: 0;
color: #FFF;
transition: min-height 250ms ease-in;
background-color: #666666;
text-align: center;
height:20px;
}
.maincontentdiv:active > .slideup, .maincontentdiv:hover > .slideup {
min-height: 50%;
}
The hover works perfectly well, however I included the click function (.active) for touchscreen devices. I can not seem to get the click function working. Could somebody please tell me what I have done wrong?
Thanks
Related
I'm trying to build a gallery where every image has a hover effect (this one). When I jhover the image and click the link inside , a bootstrap modal opens showing some content.
Until here works fine, however, when I close this modal, the image is not displaying properly in the main page. You can see my problem here:
http://www.bootply.com/90dGFlCrxI
Can anyone explain me what am I doing wrong?
Thanks very much guys!
The issue seems be the
overflow: hidden;
in this css rule:
.effect figure {
margin: 0;
position: relative;
/*overflow: hidden;*/
text-align: left;
}
if you remove the issue is fixed.
another work around:
.effect figcaption {
position: absolute;
width: 100%;
left: 0;
padding: 7px;
background: #26BC8A;
color: #ed4e6e;
height: 50px;
top: auto;
bottom: 0;
opacity: 0;
/* transform: translateY(100%); */
/* transition: transform 0.4s, opacity 0.1s 0.3s; */
}
the translateY is not working as expected.
i have looked at other questions here and tried variations of code, but nothing seems to affect my outcome: nothing works but the hover background change on the element being hovered.
ideally, the code would produce the effect of changing the background image of the element being hovered, but also move a separate div with transition.
here is my Css for both the hover div (like a mouseover effect button) and the div i want to move on hover.
the idea is a sliding effect in and out for the div, while the "button" has an active and passive state:
#custom-div-welcome2 {
background: transparent;
position: absolute;
top: 0px;
left: 53px;
width: 325px;
height: 385px;
overflow: auto;
z-index: 0;
transition: top 2s;
-webkit-transition: top 2s;
}
#custom-div-AboutButton a{
background: transparent url(junk.png) no-repeat;
position: absolute;
left:710px;
top: 325px;
width: 115px;
height: 22px;
z-index: 1;
}
#custom-div-AboutButton a:hover {
background: transparent url(stuff.png) no-repeat;
}
#custom-div-AboutButton a:hover #custom-div-welcome2{
top: 180px;
}
At the moment i am working on a header with a slider animation (css3 only):
http://jimmytenbrink.nl/slider/
Everything is working fine except sometimes the slider is bugging if you go from the center to the right. It seems that i need to stop the animation for a few miliseconds to complete. However i searched everywhere on the internet but i cant seem to get it to work.
Anyone here has experience with it who can help me out?
HTML
<header>
<div><span>slide 1</span></div>
<div><span>slide 2</span></div>
<div><span>slide 3</span></div>
<div><span>slide 4</span></div>
<div><span>slide 5</span></div>
<div><span>slide 6</span></div>
<div><span>slide 7</span></div>
<div><span>slide 8</span></div>
</header>
CSS
header {
margin-top: 10px;
width: 800px;
overflow: hidden;
height: 500px;
}
header div {
background-color: #000;
width: 43.8px;
height: 200px;
position: relative;
float: left;
-webkit-transition: width .3s;
transition: width .3s;
overflow: hidden;
-webkit-animation-timing-function: linear;
-webkit-animation-iteration-count: 1;
-webkit-animation-fill-mode: forwards;
margin-right: 2px;
}
header div:first-child {
margin-left: 0px;
}
header div:last-child {
margin-right: 0px;
}
header div:hover span {
left: 50px;
opacity: 1;
}
header div img {
position: relative;
left: -240px;
-webkit-transition: all .3s;
transition: all .3s;
-webkit-filter: grayscale(1);
overflow:hidden;
}
header div span {
-webkit-transition: left .3s;
transition: left .3s;
position: absolute;
bottom: 30px;
color: white;
left: -350px;
opacity: 0;
width: 450px;
font-family:'Fugaz One', cursive;
text-transform: uppercase;
font-size: 24px;
color: #fff;
text-shadow: 0px 0px 10px #f1f1f1;
filter: dropshadow(color=#f1f1f1, offx=0, offy=0);
}
header:hover > div {
width: 43.8px;
}
header:hover > div:hover {
width: 150px;
}
Here is a JSFiddle
So the question is, how can i set a stop on the animation for a few miliseconds so the animation can finish before it gets triggered again?
Hope my question is clear!
(thanks for the edit)
One might call my answer a workaround. Maybe it is but according to my comment on ExtPro's answer - it is still completely pure CSS.
I decided to use display: table-cell since the table cell's width is distributed equally.
So, the CSS might look like this:
HINT: This is only a bunch of necessary CSS. All the code is in the jsFiddle
header {
width: 368px;
display: table;
overflow: hidden;
}
header > div {
width: 44px;
height: 200px;
position: relative;
-webkit-transition: width .3s;
transition: width .3s;
display: table-cell;
overflow: hidden;
}
header > div:hover {
width: 151px;
}
Fiddle
As you can see, we don't have to determine the width of all not-hovered divs. Actually, the problem came from that very CSS rule:
/* DON'T USE THIS RULE - IT'S THE RULE WHICH WAS BAD */
header:hover > div {
width: 43.8px;
}
You were changing the width of the divs on header:hover, so when the transition didn't manage to do its job in time, you came out with mouse pointing to the header but to non of the divs.
If I understand what you mean by 'bugging', what is happening is if you move the mouse quickly to the right, it traverses the currently open div and is left in an area which when that div collapses, does not contain (e.g. the mouse is not hovered over) the next one in order to expand it- namely the hover event of the following div(s) is/are not firing thus they do not expand. There wont be a CSS fix for this Im afraid as its browser related, you may want to replace with jQuery/JS.
I have a problem trying to work out a small test menu with the (for me) "new" css3. The menu should be in the footer which always is on the bottom of the View port. However, I would like to mess around with the transition effects css3 offers therefore I want to grow a point of the menu when you :hover it.
The menu points are set to float:left in a relative menu div. The transition does as intended except the height transition enlarges the element downwards and (obviously as it is the footer) out of the page.
Instead I would like the menu points to grow upward. To solve this i could change the float:left to position:absolute and add bottom:0, but I would have to horizontal position every menu point (hyperlink) manually which I would like to avoid. Since the Menu size (number of menu points) should be variable and I also don't want to use and JavaScript, I am clueless.
Here is the css and the html:
<div id="footer">
<div class="menu">
menp1
menp2
menp3
menp4
menp5
menp6
</div>
</div>
and the css:
#footer {
position: absolute;
background-color: #497044;
bottom: 0px;
width: 100%;
height: 45px;
padding: 5px; }
div.menu {
position: relative;
height: 45px;
width: 480px;
left: 50%;
margin-left: -240px; }
div.menu a {
float:left;
width: 80px;
height: 50px;
border: 3px dashed;
margin-left: 5px;
text-align: center;
-moz-transition: height 2s; }
div.menu a:hover {
background-color: white;
height: 100px; }
thanks for the advice!
http://jsfiddle.net/nqCgu/2/
You mean something like this?
You can use a negative margin-top value and margin-top transition to achieve this. Add:
div.menu { ...
transition: margin-top .2s;
-moz-transition: margin-top .2s;}
div.menu a:hover {
margin-top:-50px;
background-color:white;
height: 100px; }
I am currently running into a problem when trying to implement a simple rollover using CSS :after and :hover pseudo-elements.
Have a look at the clock and facebook icons to the right: http://clean.philippchristoph.de/
Here's the CSS code:
.icon {
background: url('../img/clock_icon.png') top left no-repeat;
width: 25px;
height: 25px;
}
.icon:after {
.transition(opacity, .2s, ease);
content: " ";
position: absolute;
top: 4px; left: 5px; bottom: 0; right: 0;
background: url('../img/clock_icon.png') no-repeat;
background-position: -25px 0;
opacity: 0;
}
.icon:hover:after, .clock:hover div {
opacity: 1;
}
As you can see, the image is faded using a sprite and opacity. However, now I can't seem to hover both elements anymore. As you will see on the example page, you can hover over the facebook icon, but not over the clock. If you remove the facebook icon, you can hover over the clock again. Note that the two icons are entirely seperate elements.
I've tested this behavior on both FF and Chrome on Windows.
It'd be awesome if someone could shed some light onto this issue.. :)
Replace your CSS with this one (I mean the mentioned classes only, not your entire CSS :) ):
.icon {
background: url("../img/clock_icon.png") no-repeat scroll left top transparent;
height: 25px;
width: 25px;
position: relative
}
.icon:after {
-moz-transition: opacity 0.2s ease 0s;
background: url("../img/clock_icon.png") no-repeat scroll -25px 0pt transparent;
bottom: 0pt;
content: " ";
left: 0;
opacity: 0;
position: absolute;
right: 0pt;
top: 0;
}
.icon:hover:after, .clock:hover div {
opacity: 1;
}
.facebook, .facebook:after {
background-image: url("../img/facebook_icon.png");
}
.clock {
position: relative
}
.clock div {
-moz-transition: opacity 0.2s ease 0s;
color: #A0A0A0;
font-size: 12px;
left: 40px;
line-height: 11px;
opacity: 0;
position: absolute;
top: 5px;
width: 160px
}
You need to add position: relative to your icon class, so that the generated content is positioned relative to that, rather than the parent. I've tried to simplify what you have in a fiddle, though I wasn't 100% sure what you are after. Is that close? I also amended the positioning of the generated content.
It's worth noting that - annoyingly - you can't apply a transition to generated content (which is why any attempt to have the opacity transition on these elements will fail in your case). Hopefully this will change soon.