Let's say I have a vector a = [1, 0, 1, 2, 3, 4, 5, 0, 5, 6, 7, 8, 0, 9, 0] and I want to split it to smaller vectors based on a condition depending on value in that array. E.g. value being zero.
Thus I want to obtain vector of following vectors
[1, 0]
[1, 2, 3, 4, 5, 0]
[5, 6, 7, 8, 0]
[9, 0]
So far this was working for me as a naive solution, but it loses the type.
function split_by_λ(a::Vector, λ)
b = []
temp = []
for i in a
push!(temp, i)
if λ(i)
push!(b, temp)
temp = []
end
end
b
end
split_by_λ(a, isequal(0))
Then I tried to play with ranges, which feels a bit more idiomatic, and does not lose the type.
function split_by_λ(a::Vector, λ)
idx = findall(λ, a)
ranges = [(:)(i==1 ? 1 : idx[i-1]+1, idx[i]) for i in eachindex(idx)]
map(x->a[x], ranges)
end
split_by_λ(a, isequal(0))
but it still feels very cumbersome regarding it's a rather simple task.
Is there something I'm missing, some easier way?
Maybe someone has a shorter idea but here is mine:
julia> inds = vcat(0,findall(==(0),a),length(a))
julia> getindex.(Ref(a), (:).(inds[1:end-1].+1,inds[2:end]))
5-element Array{Array{Int64,1},1}:
[1, 0]
[1, 2, 3, 4, 5, 0]
[5, 6, 7, 8, 0]
[9, 0]
[]
Or if you want to avoid copying a
julia> view.(Ref(a), (:).(inds[1:end-1].+1,inds[2:end]))
5-element Array{SubArray{Int64,1,Array{Int64,1},Tuple{UnitRange{Int64}},true},1}:
[1, 0]
[1, 2, 3, 4, 5, 0]
[5, 6, 7, 8, 0]
[9, 0]
0-element view(::Array{Int64,1}, 16:15) with eltype Int64
Pretty much the same as Przemyslaw's answer, but maybe less cryptic dense:
function split_by(λ, a::Vector)
first, last = firstindex(a), lastindex(a)
splits = [first-1; findall(λ, a); last]
s1, s2 = #view(splits[1:end-1]), #view(splits[2:end])
return [view(a, i1+1:i2) for (i1, i2) in zip(s1, s2)]
end
Also, I changed the signature to the conventional one of "functions first", which allows you to use do-blocks. Additionally, this should work with offset indexing.
One could surely get rid of the intermediate allocations, but I think that gets ugly without yield:
function split_by(λ, a::Vector)
result = Vector{typeof(view(a, 1:0))}()
l = firstindex(a)
r = firstindex(a)
while r <= lastindex(a)
if λ(a[r])
push!(result, #view(a[l:r]))
l = r + 1
end
r += 1
end
push!(result, #view(a[l:end]))
return result
end
how can I find the next number in this sequence ,
1, 4, 7, 8, 13, 12, 9 , ?
How to check , given any sequence of numbers , feasible or not. Any general theory or approach is very much welcomed .
One method is to go to the Online Encyclopedia of Integer Sequences and enter your list of at least six or eight numbers into the box and see if that happens to be a known sequence. For your example this doesn't find a known sequence.
If that doesn't work then you can try Mathematica's FindFormula
p=FindFormula[{1, 4, 7, 8, 13, 12, 9}];
and then
p[1] returns 1, p[2] returns 4, p[3] returns 7... and p[8] returns 106, etc.
You can read the documentation on FindFormula and you can look at the formula p by using InputForm[p] where #1 represents a variable in the function p.
In general I think this is rarely going to produce the result that you are looking for.
seq = FindSequenceFunction[{1, 4, 7, 8, 13, 12, 9}, n]
(48 - 74 n - 14 n^2 + 11 n^3 - n^4)/(3 (-13 + 3 n))
Checking the 7th number
n = 7;
seq
9
The next number is a fraction, apparently
n = 8;
seq
32/11
Show[Plot[seq, {n, 1, 10}],
ListPlot[Table[seq, {n, 1, 10}]],
PlotRange -> {{0, 10}, {-20, 30}}, AxesOrigin -> {0, 0}]
What is julian way to do yield (and yield from) as python do?
Edit: I will try to add small example in python.
Think 4x4 chess board. Find every N moves long path chess king could do. Don't waste memory -> make generator of every path.
if we sign every position with numbers:
0 1 2 3
4 5 6 7
8 9 10 11
12 13 14 16
point 0 has 3 neighbors (1, 4, 5). We could find table for every neighbors for every point:
NEIG = [[1, 4, 5], [0, 2, 4, 5, 6], [1, 3, 5, 6, 7], [2, 6, 7], [0, 1, 5, 8, 9], [0, 1, 2, 4, 6, 8, 9, 10], [1, 2, 3, 5, 7, 9, 10, 11], [2, 3, 6, 10, 11], [4, 5, 9, 12, 13], [4, 5, 6, 8, 10, 12, 13, 14], [5, 6, 7, 9, 11, 13, 14, 15], [6, 7, 10, 14, 15], [8, 9, 13], [8, 9, 10, 12, 14], [9, 10, 11, 13, 15], [10, 11, 14]]
Recursive function (generator) which enlarge given path from list of points or from generator of (generator of ...) points:
def enlarge(path):
if isinstance(path, list):
for i in NEIG[path[-1]]:
if i not in path:
yield path[:] + [i]
else:
for i in path:
yield from enlarge(i)
Function (generator) which give every path with given length
def paths(length):
steps = ([i] for i in range(16)) # first steps on every point on board
for _ in range(length-1):
nsteps = enlarge(steps)
steps = nsteps
yield from steps
We could see that there is 905776 paths with length 10:
sum(1 for i in paths(10))
Out[89]: 905776
In ipython we could timeit:
%timeit sum(1 for i in paths(10))
1.21 s ± 15.1 ms per loop (mean ± std. dev. of 7 runs, 1 loop each)
My julia implementation is ugly and much more complicated. And it seems to be slower.
Check out ResumableFunctions.jl
from the README
using ResumableFunctions
#resumable function fibonnaci(n::Int) :: Int
a = 0
b = 1
for i in 1:n-1
#yield a
a, b = b, a+b
end
a
end
for fib in fibonnaci(10)
println(fib)
end
You can use Julia Iterators.
struct Fibonacci
last::Int64
end
function Base.iterate(fibo::Fibonacci)
return 1, (1, 1, 2) # the first output, and the next iteration state
end
function Base.iterate(fibo::Fibonacci, state)
i, a, b = state
if i ≤ fibo.last
return a, (i + 1, b, a + b) # the output, and the next iteration state
end
end
You can then use it like this:
for i in Fibonacci(10)
print(i, " ")
end
Which outputs:
1 1 2 3 5 8 13 21 34 55 89
This can result in excellent performance, but it is often a bit verbose, and it's also tricky to decide on what iteration state to use, and how to find the next element given that state. In your chess example, I would avoid this approach, but in other cases it can come in really handy.
You can use Channels:
function fibo(n)
Channel() do ch
a, b = 0, 1
for _ in 1:n
a, b = b, a + b
put!(ch, a)
end
end
end
Use it like this:
for val in fibo(10)
print(val, " ")
end
Which outputs:
1 1 2 3 5 8 13 21 34 55
To get the yield from behavior, you can just use a for loop. For example, to get the Fibonacci sequence r times:
function repeat_fibo(r, n)
Channel() do ch
for _ in 1:r
for val in fibo(n)
put!(ch, val)
end
end
end
end
For more details, see the docs.
Note that the ResumableFunctions.jl library has some benchmarks showing that their solution is significantly faster than using Channels (see #gggg's answer). Perhaps Channel performance will improve in future Julia versions.
To get better Channel performance, you should set the channel's element type and the channel's size: for example, use Channel{Int64}(100) instead of Channel().
Here's a Julia implementation of your chess problem using Channels:
NEIG = [[1, 4, 5], [0, 2, 4, 5, 6], [1, 3, 5, 6, 7], [2, 6, 7], [0, 1, 5, 8, 9],
[0, 1, 2, 4, 6, 8, 9, 10], [1, 2, 3, 5, 7, 9, 10, 11], [2, 3, 6, 10, 11],
[4, 5, 9, 12, 13], [4, 5, 6, 8, 10, 12, 13, 14],
[5, 6, 7, 9, 11, 13, 14, 15], [6, 7, 10, 14, 15], [8, 9, 13],
[8, 9, 10, 12, 14], [9, 10, 11, 13, 15], [10, 11, 14]]
function paths(start, length)
Channel{Vector{Int64}}(100) do ch
if length == 1
put!(ch, [start])
else
for path in paths(start, length - 1)
for next_step in NEIG[path[end] + 1]
next_step in path || put!(ch, [path; next_step])
end
end
end
end
end
function paths(length)
Channel{Vector{Int64}}(100) do ch
for start in 0:15
for path in paths(start, length)
put!(ch, path)
end
end
end
end
You can count all the paths of length 10 much like in Python:
sum(1 for _ in paths(10))
You can also time it:
#time sum(1 for _ in paths(10))
On my machine this takes about 4 seconds. There are probably ways to optimize this further, but this does show that Channel performance still has some room for improvement.
Given an undirected graph how do you go about finding all cycles of length n (using networkx if possible). So input would be the Graph and n and the function would return all cycles of that length.
You can use networkx.cycle_basis.
>>> G = networkx.Graph()
>>> networkx.add_cycle(G, [0, 1, 2, 3])
>>> networkx.add_cycle(G, [0, 3, 4, 5])
>>> print(networkx.cycle_basis(G))
[[3, 4, 5, 0], [1, 2, 3, 0]]
>>> print(networkx.cycle_basis(G, root = 2))
[[1, 2, 3, 0]]
Then, you can check the length of each list as you see fit.
I'm trying to match all the paths (up to a certain length) among a group of nodes. I can successfully do so by issuing the following query:
MATCH (n) WHERE ID(n) IN [1, 2, 3, 4, 5]
MATCH (m) WHERE ID(m) IN [1, 2, 3, 4, 5]
MATCH paths = allShortestPaths((n)-[*..3]-(m))
RETURN paths
I'm satisfied with both the result itself and its speed. What I don't understand is whether there is a way of defining a variable to define the collection [1, 2, 3, 4, 5] just once. Sort of:
x = [1, 2, 3, 4, 5]
MATCH (n) WHERE ID(n) IN x
MATCH (m) WHERE ID(m) IN x
MATCH paths = allShortestPaths((n)-[*..3]-(m))
RETURN paths
Is this possible? I've tried several alternatives (using WITH and AS) but with no luck.
Thanks
Use:
WITH [1, 2, 3, 4, 5] AS x
As in:
WITH [1, 2, 3, 4, 5] AS x
MATCH (n) WHERE ID(n) IN x
MATCH (m) WHERE ID(m) IN x
MATCH paths = allShortestPaths((n)-[*..3]-(m))
RETURN paths
By the way, there seems to be a regression in neo4j-community-2.2.0-M03, which causes an error with the above query. M02 seems to have no problems.