Related
How do I use CSS3 gradients for my background-color and then apply a background-image to apply some sort of light transparent texture?
Multiple backgrounds!
body {
background: #eb01a5;
background-image: url("IMAGE_URL"); /* fallback */
background-image: url("IMAGE_URL"), linear-gradient(#eb01a5, #d13531); /* W3C */
}
These 2 lines are the fallback for any browser that doesn't do gradients.
See notes for stacking images only IE < 9 below.
Line 1 sets a flat background color.
Line 2 sets the background image fallback.
The final line sets a background image and gradient for browsers that can handle them.
Line 3 is for all relatively modern browsers.
Nearly all current browsers have support for multiple background images and css backgrounds. See http://caniuse.com/#feat=css-gradients for browser support. For a good post on why you don't need multiple browser prefixes, see http://codepen.io/thebabydino/full/pjxVWp/
Layer Stack
It should be noted that the first defined image will be topmost in the stack. In this case, the image is on TOP of the gradient.
For more information about background layering see http://www.w3.org/TR/css3-background/#layering.
Stacking images ONLY (no gradients in the declaration) For IE < 9
IE9 and up can stack images this same way. You could use this to create a gradient image for ie9, though personally, I wouldn't. However to be noted when using only images, ie < 9 will ignore the fallback statement and not show any image. This does not happen when a gradient is included. To use a single fallback image in this case I suggest using Paul Irish's wonderful Conditional HTML element along with your fallback code:
.lte9 #target{ background-image: url("IMAGE_URL"); }
Background position, sizing etc.
Other properties that would apply to a single image may also be comma separated. If only 1 value is supplied, that will be applied to all stacked images including the gradient. background-size: 40px; will constrain both the image and the gradient to 40px height and width. However using background-size: 40px, cover; will make the image 40px and the gradient will cover the element. To only apply a setting to one image, set the default for the other: background-position: 50%, 0 0; or for browsers that support it use initial: background-position: 50%, initial;
You may also use the background shorthand, however this removes the fallback color and image.
body{
background: url("IMAGE_URL") no-repeat left top, linear-gradient(#eb01a5, #d13531);
}
The same applies to background-position, background-repeat, etc.
If you also want to set background position for your image, than you can use this:
background-color: #444; // fallback
background: url('PATH-TO-IMG') center center no-repeat; // fallback
background: url('PATH-TO-IMG') center center no-repeat, -moz-linear-gradient(top, #startColor, #endColor); // FF 3.6+
background: url('PATH-TO-IMG') center center no-repeat, -webkit-gradient(linear, 0 0, 0 100%, from(#startColor), to(#endColor)); // Safari 4+, Chrome 2+
background: url('PATH-TO-IMG') center center no-repeat, -webkit-linear-gradient(top, #startColor, #endColor); // Safari 5.1+, Chrome 10+
background: url('PATH-TO-IMG') center center no-repeat, -o-linear-gradient(top, #startColor, #endColor); // Opera 11.10
background: url('PATH-TO-IMG') center center no-repeat, linear-gradient(to bottom, #startColor, #endColor); // Standard, IE10
or you can also create a LESS mixin (bootstrap style):
#gradient {
.vertical-with-image(#startColor: #555, #endColor: #333, #image) {
background-color: mix(#startColor, #endColor, 60%); // fallback
background-image: #image; // fallback
background: #image, -moz-linear-gradient(top, #startColor, #endColor); // FF 3.6+
background: #image, -webkit-gradient(linear, 0 0, 0 100%, from(#startColor), to(#endColor)); // Safari 4+, Chrome 2+
background: #image, -webkit-linear-gradient(top, #startColor, #endColor); // Safari 5.1+, Chrome 10+
background: #image, -o-linear-gradient(top, #startColor, #endColor); // Opera 11.10
background: #image, linear-gradient(to bottom, #startColor, #endColor); // Standard, IE10
}
}
One thing to realize is that the first defined background image is topmost in the stack. The last defined image will be bottommost. That means, to have a background gradient behind an image, you would need:
body {
background-image: url("http://www.skrenta.com/images/stackoverflow.jpg"), linear-gradient(red, yellow);
background-image: url("http://www.skrenta.com/images/stackoverflow.jpg"), -webkit-gradient(linear, left top, left bottom, from(red), to(yellow));
background-image: url("http://www.skrenta.com/images/stackoverflow.jpg"), -moz-linear-gradient(top, red, yellow);
}
You could also define background positions and background size for the images.
I put together a blog post about some interesting things you can do with CSS3 gradients
you could simply type :
background: linear-gradient(
to bottom,
rgba(0,0,0, 0),
rgba(0,0,0, 100)
),url(../images/image.jpg);
my solution:
background-image: url(IMAGE_URL); /* fallback */
background-image: linear-gradient(to bottom, rgba(0,0,0,0.7) 0%,rgba(0,0,0,0.7) 100%), url(IMAGE_URL);
I always use the following code to make it work. There are some notes:
If you place image URL before gradient, this image will be displayed above the gradient as expected.
.background-gradient {
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -moz-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -webkit-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -webkit-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -o-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -ms-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, linear-gradient(135deg, #6ec575 0, #3b8686 100%);
height: 500px;
width: 500px;
}
<div class="background-gradient"></div>
If you place gradient before image URL, this image will be displayed under the gradient.
.background-gradient {
background: -moz-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -webkit-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -webkit-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -o-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -ms-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
width: 500px;
height: 500px;
}
<div class="background-gradient"></div>
This technique is just the same as we have multiple background images as describe here
I had an implementation where I needed to take this technique a step farther, and wanted to outline my work. The below code does the same thing but uses SASS, Bourbon, and an image sprite.
#mixin sprite($position){
#include background(url('image.png') no-repeat ($position), linear-gradient(#color1, #color2));
}
a.button-1{
#include sprite(0 0);
}
a.button-2{
#include sprite (0 -20px);
}
a.button-2{
#include sprite (0 -40px);
}
SASS and Bourbon take care of the cross browser code, and now all I have to declare is the sprite position per button. It is easy to extend this principal for the buttons active and hover states.
If you have strange errors with downloading background images use W3C Link checker: https://validator.w3.org/checklink
Here are modern mixins that I use (credits: PSA: don't use gradient generators):
.buttonAkc
{
.gradientBackground(#imageName: 'accept.png');
background-repeat: no-repeat !important;
background-position: center right, top left !important;
}
.buttonAkc:hover
{
.gradientBackgroundHover('accept.png');
}
.gradientBackground(#startColor: #fdfdfd, #endColor: #d9d9db, #imageName)
{
background-color: mix(#startColor, #endColor, 60%); // fallback
background-image: url("#{img-folder}/#{imageName}?v=#{version}"); // fallback
background: url("#{img-folder}/#{imageName}?v=#{version}") no-repeat scroll right center, -webkit-linear-gradient(top, #startColor 0%, #endColor 100%) no-repeat scroll left top; // Chrome 10-25, Safari 5.1-6
background: url("#{img-folder}/#{imageName}?v=#{version}") no-repeat scroll right center, linear-gradient(to bottom, #startColor 0%, #endColor 100%) no-repeat scroll left top;
}
.gradientBackgroundHover(#imageName)
{
.gradientBackground(#fdfdfd, #b5b6b9, #imageName);
}
If you want a gradient with a single background image in the center, you can do it with one line of code like this:
body {
background: url(logo.png) no-repeat fixed center center, linear-gradient(#00467f, #a5cc82) fixed;
}
Use background-blend-mode and rgba to mix the background image and color
This is what you need:
.myblendedbg {
background-image: url("some_image.png");
background-color: rgba(0, 0, 0, 0.85); /* use rgba for fine adjustments */
background-blend-mode: multiply;
}
If you adjust the alpha value of the rgba color value (it's at .85 in the example), you can control the transparency.
Also, background-blend-mode has other values you can play with to get some really creative results.
NOTE: background-blend-mode: color; fails on Firefox, while multiply works on all modern browsers
Here is a MIXIN that I created to handle everything that people might like to use:
.background-gradient-and-image (#fallback, #imgUrl, #background-position-x, #background-position-y, #startColor, #endColor) {
background: #fallback;
background: url(#imgUrl) #background-position-x #background-position-y no-repeat; /* fallback */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -webkit-gradient(linear, left top, left bottom, from(#startColor) #background-position-x #background-position-y no-repeat, to(#endColor)); /* Saf4+, Chrome */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -webkit-linear-gradient(top, #startColor, #endColor); /* Chrome 10+, Saf5.1+ */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -moz-linear-gradient(top, #startColor, #endColor); /* FF3.6+ */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -ms-linear-gradient(top, #startColor, #endColor); /* IE10 */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -o-linear-gradient(top, #startColor, #endColor); /* Opera 11.10+ */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, linear-gradient(top, #startColor, #endColor); /* W3C */
}
This can be used like so:
.background-gradient-and-image (#f3f3f3, "../images/backgrounds/community-background.jpg", left, top, #fafcfd, #f2f2f2);
Hope you guys find this helpful.
credit to #Gidgidonihah for finding the initial solution.
I was trying to do the same thing. While background-color and background-image exist on separate layers within an object -- meaning they can co-exist -- CSS gradients seem to co-opt the background-image layer.
From what I can tell, border-image seems to have wider support than multiple backgrounds, so maybe that's an alternative approach.
http://articles.sitepoint.com/article/css3-border-images
UPDATE: A bit more research. Seems Petra Gregorova has something working here --> http://petragregorova.com/demos/css-gradient-and-bg-image-final.html
You could use multiple background: linear-gradient(); calls, but try this:
If you want the images to be completely fused together where it doesn't look like the elements load separately due to separate HTTP requests then use this technique. Here we're loading two things on the same element that load simultaneously...
Just make sure you convert your pre-rendered 32-bit transparent png image/texture to base64 string first and use it within the background-image css call (in place of INSERTIMAGEBLOBHERE in this example).
I used this technique to fuse a wafer looking texture and other image data that's serialized with a standard rgba transparency / linear gradient css rule. Works better than layering multiple art and wasting HTTP requests which is bad for mobile. Everything is loaded client side with no file operation required, but does increase document byte size.
div.imgDiv {
background: linear-gradient(to right bottom, white, rgba(255,255,255,0.95), rgba(255,255,255,0.95), rgba(255,255,255,0.9), rgba(255,255,255,0.9), rgba(255,255,255,0.85), rgba(255,255,255,0.8) );
background-image: url("data:image/png;base64,INSERTIMAGEBLOBHERE");
}
If you have to get gradients and background images working together in IE 9 (HTML 5 & HTML 4.01 Strict), add the following attribute declaration to your css class and it should do the trick:
filter: progid:DXImageTransform.Microsoft.gradient(GradientType=0, startColorstr='#000000', endColorstr='#ff00ff'), progid:DXImageTransform.Microsoft.AlphaImageLoader(src='[IMAGE_URL]', sizingMethod='crop');
Notice that you use the filter attribute and that there are two instances of progid:[val] separated by a comma before you close the attribute value with a semicolon. Here's the fiddle. Also notice that when you look at the fiddle the gradient extends beyond the rounded corners. I don't have a fix for that other not using rounded corners. Also note that when using a relative path in the src [IMAGE_URL] attribute, the path is relative to the document page and not the css file (See source).
This article (http://coding.smashingmagazine.com/2010/04/28/css3-solutions-for-internet-explorer/) is what lead me to this solution. It's pretty helpful for IE-specific CSS3.
I resolve the problem in that way. I define Gradient in HTML and background image in the Body
html {
background-image: -webkit-gradient(linear, left bottom, right top, color-stop(0.31, rgb(227, 227, 227)), color-stop(0.66, rgb(199, 199, 199)), color-stop(0.83, rgb(184, 184, 184)));
background-image: -moz-linear-gradient(left bottom, rgb(227, 227, 227) 31%, rgb(199, 199, 199) 66%, rgb(184, 184, 184) 83%);
height: 100%
}
body {
background: url("http://www.skrenta.com/images/stackoverflow.jpg");
height: 100%
}
this is a background image with Gradient overlay, the 26% is the opacity and 7deg is the gradient position
CSS Gradient Generator
backgroundImage: `linear-gradient(7deg, rgba(2,0,36,1) 0%, rgba(39,17,68,1) 26%, rgba(10,19,20,0.49343487394957986) 100%), url('backgroundImg.jpeg')`,
I wanted to make span button with background image, background gradient combination.
http://enjoycss.com/ helped to do my work task. Only I have to remove some auto generated additional CSS. But it's really nice site build your scratch work.
#nav a.link-style span {
background: url("../images/order-now-mobile.png"), -webkit-linear-gradient(0deg, rgba(190,20,27,1) 0, rgba(224,97,102,1) 51%, rgba(226,0,0,1) 100%);
background: url("../images/order-now-mobile.png"), -moz-linear-gradient(90deg, rgba(190,20,27,1) 0, rgba(224,97,102,1) 51%, rgba(226,0,0,1) 100%);
background: url("../images/order-now-mobile.png"), linear-gradient(90deg, rgba(170,31,0,1) 0, rgba(214,18,26,1) 51%, rgba(170,31,0,1) 100%);
background-repeat: no-repeat;
background-position: 50% 50%;
border-radius: 8px;
border: 3px solid #b30a11;
}
For my responsive design, my drop-box down-arrow on the right side of the box (vertical accordion), accepted percentage as position. Initially the down-arrow was "position: absolute; right: 13px;". With the 97% positioning it worked like charm as follows:
> background: #ffffff;
> background-image: url(PATH-TO-arrow_down.png); /*fall back - IE */
> background-position: 97% center; /*fall back - IE */
> background-repeat: no-repeat; /*fall back - IE */
> background-image: url(PATH-TO-arrow_down.png) no-repeat 97% center;
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -moz-linear-gradient(top, #ffffff 1%, #eaeaea 100%);
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -webkit-gradient(linear, left top, left bottom, color-stop(1%,#ffffff), color-stop(100%,#eaeaea));
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -webkit-linear-gradient(top, #ffffff 1%,#eaeaea 100%);
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -o-linear-gradient(top, #ffffff 1%,#eaeaea 100%);<br />
> filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#ffffff', endColorstr='#eaeaea',GradientType=0 );
P.S. Sorry, don't know how to handle the filters.
I hope this is cross-browser enough:
(modified base from gradient editor with black to transparent vertical gradient on top of image)
background-image: url('YOURIMAGE.JPG');
background-image: -moz-linear-gradient(left, rgba(0,0,0,1) 0%, rgba(0,0,0,0) 100%),url('YOURIMAGE.JPG'); /* FF3.6-15 */
background-image: -webkit-linear-gradient(left, rgba(0,0,0,1) 0%,rgba(0,0,0,0) 100%),url('YOURIMAGE.JPG'); /* Chrome10-25,Safari5.1-6 */
background-image: linear-gradient(to right, rgba(0,0,0,1) 0%,rgba(0,0,0,0) 100%),url('YOURIMAGE.JPG'); /* W3C, IE10+, FF16+, Chrome26+, Opera12+, Safari7+ */
filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#000000', endColorstr='#00000000',GradientType=1 ), progid:DXImageTransform.Microsoft.AlphaImageLoader(src='YOURIMAGE.JPG', sizingMethod='crop'); /* IE6-9 */
As a sure method way, you can just make a background image that is say 500x5 pixels, in your css use:
background-img:url(bg.jpg) fixed repeat-x;
background:#<xxxxxx>;
Where xxxxxx corresponds with the color that matches the final gradient color.
You could also fix this to the bottom of the screen and have it match the initial gradient color.
PROBLEM
I am trying to combine the CSS3 gradient feature along with a background-image sized specifically and placed specifically in the div. Strange thing is that the background-size property not only applies the size to the image, but also the gradient. However I need to keep the image 30px and apply the graident all the way. Any help would be welcomed?
Thanks in advance
CSS
.accordian-head {
height: 50px;
padding: 10px 10px;
background: #ADADAD;
background-image: url(../img/plus-icon.png) 97% 50%;
background-position:97% 50%;
background-repeat:no-repeat; /* fallback */
background-size:30px;
background-image: url(../img/plus-icon.png), -webkit-gradient(linear, left top, left bottom, from(#F4F4F4), to(#ADADAD)); /* Saf4+, Chrome */
background-image: url(../img/plus-icon.png), -webkit-linear-gradient(top, #F4F4F4 0%, #ADADAD 100%); /* Chrome 10+, Saf5.1+ */
background-image: url(../img/plus-icon.png), -moz-linear-gradient(top, #F4F4F4 0%, #ADADAD 100%); /* FF3.6+ */
background-image: url(../img/plus-icon.png), -ms-linear-gradient(top, #F4F4F4 0%, #ADADAD 100%); /* IE10 */
background-image: url(../img/plus-icon.png), -o-linear-gradient(top, #F4F4F4 0%, #ADADAD 100%); /* Opera 11.10+ */
background-image: url(../img/plus-icon.png), linear-gradient(top, #F4F4F4 0%, #ADADAD 100%); /* W3C */
}
You have two layers, one for the image and one for the gradient. When you specify one background-size value, it applies to both layers.
To stretch the gradient you need to explicitly give it its own size:
background-size:30px, 100%;
What you could do is use nested divs, and apply the gradient on top.
<div class="gradient">
<div class="image" style="background-image:url(../img/plus-icon.png)">
</div>
</div>
.gradient {
background: -webkit-gradient(linear, left top, left bottom, from(#F4F4F4), to(#ADADAD));
/* etc */
}
.image {
background-size: 30%;
}
I have created a simple css bar with colour stops using the following:
#testing{
width:100%;
height:40px;
background-image: -webkit-linear-gradient(left, #034a96 80%, #eab92d 50%);
background-image: -moz-linear-gradient(top, #034a96 50%, #eab92d 51%);
background-image: -ms-linear-gradient(top, #034a96 50%, #eab92d 51%);
background-image: -o-linear-gradient(top, #034a96 50%, #eab92d 51%);
background-image: linear-gradient(top, #034a96 50%, #eab92d 51%);
-webkit-border-radius: 15px;
-moz-border-radius: 15px;
border-radius: 15px;
}
What I would like to do is have the first 80% of the bar is have a gradient that goes from the top with colour #034a96 to #0663c7 and then just that gradient colouring 50% of the bar. Then with the other 51% I have another gradient from the top with #eab92d to #c79810. What I'm asking is if it is possible to have multiple gradients with in each other eg:
background-image: -webkit-linear-gradient(left, top #034a96 to #0663c7 50%, top #eab92d to #c79810 51%);
Or something along those lines. I hope I'm being clear with everything. Thanks in advance
Yes, you can.
One simple example (not exactly your colourset, but it shows the plan):
background: #b8e1fc; /* Old browsers */
background: -moz-linear-gradient(top, #b8e1fc 0%, #a9d2f3 10%, #90bae4 25%, #90bcea 37%, #90bff0 50%, #6ba8e5 51%, #a2daf5 83%, #bdf3fd 100%); /* FF3.6+ */
background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,#b8e1fc), color-stop(10%,#a9d2f3), color-stop(25%,#90bae4), color-stop(37%,#90bcea), color-stop(50%,#90bff0), color-stop(51%,#6ba8e5), color-stop(83%,#a2daf5), color-stop(100%,#bdf3fd)); /* Chrome,Safari4+ */
background: -webkit-linear-gradient(top, #b8e1fc 0%,#a9d2f3 10%,#90bae4 25%,#90bcea 37%,#90bff0 50%,#6ba8e5 51%,#a2daf5 83%,#bdf3fd 100%); /* Chrome10+,Safari5.1+ */
background: -o-linear-gradient(top, #b8e1fc 0%,#a9d2f3 10%,#90bae4 25%,#90bcea 37%,#90bff0 50%,#6ba8e5 51%,#a2daf5 83%,#bdf3fd 100%); /* Opera 11.10+ */
background: linear-gradient(to bottom, #b8e1fc 0%,#a9d2f3 10%,#90bae4 25%,#90bcea 37%,#90bff0 50%,#6ba8e5 51%,#a2daf5 83%,#bdf3fd 100%); /* W3C */
filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#b8e1fc', endColorstr='#bdf3fd',GradientType=0 ); /* IE6-9 */
This code doesn't create multi-step gradients in IE.
Up to IE9, these aren't possible at all (only simple gradients), but IE9 supports SVG data. It's a bit complicated to write, but you should have a look at http://www.colorzilla.com/gradient-editor. It's an online-tool for creating CSS code for gradients. It also supports SVG gradients for IE9.
I know that this can easily be done in any image editing program, I was just curious if there was a way just using css.
Example:
body {background-color: #837960; background-image: url("Images/background.jpg") background-repeat: no-repeat;}
Could you use css to fade the background image into the background color so a visible line does not exist or should I keep adding a gradient to transparency in Photoshop?
It is possible - in CSS3 you can set multiple values for background
body {
background: #837960 url("https://i.stack.imgur.com/MUsp6.jpg") 0 0 no-repeat;
background: -moz-linear-gradient(top, rgba(255,255,255,0) 0%, rgba(130,91,0,1) 100%); /* FF3.6+ */
background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(255,255,255,0)), color-stop(100%,rgba(130,91,0,1))); /* Chrome,Safari4+ */
background: -webkit-linear-gradient(top, rgba(255,255,255,0) 0%,rgba(130,91,0,1) 100%); /* Chrome10+,Safari5.1+ */
background: -o-linear-gradient(top, rgba(255,255,255,0) 0%,rgba(130,91,0,1) 100%); /* Opera 11.10+ */
background: -ms-linear-gradient(top, rgba(255,255,255,0) 0%,rgba(130,91,0,1) 100%); /* IE10+ */
background: linear-gradient(to bottom, rgba(255,255,255,0) 0%,rgba(130,91,0,1) 100%); /* W3C */
filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#00ffffff', endColorstr='#825b00',GradientType=0 ); /* IE6-9 */
}
However, it will work only in modern browser that supports CSS3
(code generated via http://www.colorzilla.com/gradient-editor/)
Yes it's possible with CSS using the linear-gradient() function with multiple background images:
body {
background-color: #837960;
background-image: linear-gradient(
to bottom, transparent, #837960
), url("Images/background.jpg");
background-repeat: no-repeat;
}
Specify the gradient as the first image so it gets stacked on top, and use it to fade from transparent at the top to the opaque background-color at the bottom. This will give the illusion the image underneath is fading into the background without requiring alpha-transparency on the image itself.
Ideally, you should just edit the image so as to have a consistent look across browsers.
While you can have a background gradient, that would appear behind an image, as the background images are placed over background color. In order to have the image look like it is fading into another color, you would need to place another tag on top of that the body such as:
body { background: url('https://i.stack.imgur.com/MUsp6.jpg') }
div.content {
width: 100%;
height: 100%;
background: -moz-linear-gradient(top, rgba(255,255,255,0) 0%, rgba(255,255,255,1) 100%); /* FF3.6+ */
background: -webkit-gradient(linear, left top, left bottom, color-stop(0%,rgba(255,255,255,0)), color-stop(100%,rgba(255,255,255,1))); /* Chrome,Safari4+ */
background: -webkit-linear-gradient(top, rgba(255,255,255,0) 0%,rgba(255,255,255,1) 100%); /* Chrome10+,Safari5.1+ */
background: -o-linear-gradient(top, rgba(255,255,255,0) 0%,rgba(255,255,255,1) 100%); /* Opera 11.10+ */
background: -ms-linear-gradient(top, rgba(255,255,255,0) 0%,rgba(255,255,255,1) 100%); /* IE10+ */
background: linear-gradient(to bottom, rgba(255,255,255,0) 0%,rgba(255,255,255,1) 100%); /* W3C */
filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#00ffffff', endColorstr='#ffffff',GradientType=0 ); /* IE6-9 */
}
<body>
<div class="content">Example</div>
</body>
Or whatever color/positioning combination you would like. A good resource is http://www.colorzilla.com/gradient-editor/
How do I use CSS3 gradients for my background-color and then apply a background-image to apply some sort of light transparent texture?
Multiple backgrounds!
body {
background: #eb01a5;
background-image: url("IMAGE_URL"); /* fallback */
background-image: url("IMAGE_URL"), linear-gradient(#eb01a5, #d13531); /* W3C */
}
These 2 lines are the fallback for any browser that doesn't do gradients.
See notes for stacking images only IE < 9 below.
Line 1 sets a flat background color.
Line 2 sets the background image fallback.
The final line sets a background image and gradient for browsers that can handle them.
Line 3 is for all relatively modern browsers.
Nearly all current browsers have support for multiple background images and css backgrounds. See http://caniuse.com/#feat=css-gradients for browser support. For a good post on why you don't need multiple browser prefixes, see http://codepen.io/thebabydino/full/pjxVWp/
Layer Stack
It should be noted that the first defined image will be topmost in the stack. In this case, the image is on TOP of the gradient.
For more information about background layering see http://www.w3.org/TR/css3-background/#layering.
Stacking images ONLY (no gradients in the declaration) For IE < 9
IE9 and up can stack images this same way. You could use this to create a gradient image for ie9, though personally, I wouldn't. However to be noted when using only images, ie < 9 will ignore the fallback statement and not show any image. This does not happen when a gradient is included. To use a single fallback image in this case I suggest using Paul Irish's wonderful Conditional HTML element along with your fallback code:
.lte9 #target{ background-image: url("IMAGE_URL"); }
Background position, sizing etc.
Other properties that would apply to a single image may also be comma separated. If only 1 value is supplied, that will be applied to all stacked images including the gradient. background-size: 40px; will constrain both the image and the gradient to 40px height and width. However using background-size: 40px, cover; will make the image 40px and the gradient will cover the element. To only apply a setting to one image, set the default for the other: background-position: 50%, 0 0; or for browsers that support it use initial: background-position: 50%, initial;
You may also use the background shorthand, however this removes the fallback color and image.
body{
background: url("IMAGE_URL") no-repeat left top, linear-gradient(#eb01a5, #d13531);
}
The same applies to background-position, background-repeat, etc.
If you also want to set background position for your image, than you can use this:
background-color: #444; // fallback
background: url('PATH-TO-IMG') center center no-repeat; // fallback
background: url('PATH-TO-IMG') center center no-repeat, -moz-linear-gradient(top, #startColor, #endColor); // FF 3.6+
background: url('PATH-TO-IMG') center center no-repeat, -webkit-gradient(linear, 0 0, 0 100%, from(#startColor), to(#endColor)); // Safari 4+, Chrome 2+
background: url('PATH-TO-IMG') center center no-repeat, -webkit-linear-gradient(top, #startColor, #endColor); // Safari 5.1+, Chrome 10+
background: url('PATH-TO-IMG') center center no-repeat, -o-linear-gradient(top, #startColor, #endColor); // Opera 11.10
background: url('PATH-TO-IMG') center center no-repeat, linear-gradient(to bottom, #startColor, #endColor); // Standard, IE10
or you can also create a LESS mixin (bootstrap style):
#gradient {
.vertical-with-image(#startColor: #555, #endColor: #333, #image) {
background-color: mix(#startColor, #endColor, 60%); // fallback
background-image: #image; // fallback
background: #image, -moz-linear-gradient(top, #startColor, #endColor); // FF 3.6+
background: #image, -webkit-gradient(linear, 0 0, 0 100%, from(#startColor), to(#endColor)); // Safari 4+, Chrome 2+
background: #image, -webkit-linear-gradient(top, #startColor, #endColor); // Safari 5.1+, Chrome 10+
background: #image, -o-linear-gradient(top, #startColor, #endColor); // Opera 11.10
background: #image, linear-gradient(to bottom, #startColor, #endColor); // Standard, IE10
}
}
One thing to realize is that the first defined background image is topmost in the stack. The last defined image will be bottommost. That means, to have a background gradient behind an image, you would need:
body {
background-image: url("http://www.skrenta.com/images/stackoverflow.jpg"), linear-gradient(red, yellow);
background-image: url("http://www.skrenta.com/images/stackoverflow.jpg"), -webkit-gradient(linear, left top, left bottom, from(red), to(yellow));
background-image: url("http://www.skrenta.com/images/stackoverflow.jpg"), -moz-linear-gradient(top, red, yellow);
}
You could also define background positions and background size for the images.
I put together a blog post about some interesting things you can do with CSS3 gradients
you could simply type :
background: linear-gradient(
to bottom,
rgba(0,0,0, 0),
rgba(0,0,0, 100)
),url(../images/image.jpg);
my solution:
background-image: url(IMAGE_URL); /* fallback */
background-image: linear-gradient(to bottom, rgba(0,0,0,0.7) 0%,rgba(0,0,0,0.7) 100%), url(IMAGE_URL);
I always use the following code to make it work. There are some notes:
If you place image URL before gradient, this image will be displayed above the gradient as expected.
.background-gradient {
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -moz-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -webkit-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -webkit-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -o-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, -ms-linear-gradient(135deg, #6ec575 0, #3b8686 100%);
background: url('http://trungk18.github.io/img/trungk18.png') no-repeat, linear-gradient(135deg, #6ec575 0, #3b8686 100%);
height: 500px;
width: 500px;
}
<div class="background-gradient"></div>
If you place gradient before image URL, this image will be displayed under the gradient.
.background-gradient {
background: -moz-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -webkit-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -webkit-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -o-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: -ms-linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
background: linear-gradient(135deg, #6ec575 0, #3b8686 100%), url('http://trungk18.github.io/img/trungk18.png') no-repeat;
width: 500px;
height: 500px;
}
<div class="background-gradient"></div>
This technique is just the same as we have multiple background images as describe here
I had an implementation where I needed to take this technique a step farther, and wanted to outline my work. The below code does the same thing but uses SASS, Bourbon, and an image sprite.
#mixin sprite($position){
#include background(url('image.png') no-repeat ($position), linear-gradient(#color1, #color2));
}
a.button-1{
#include sprite(0 0);
}
a.button-2{
#include sprite (0 -20px);
}
a.button-2{
#include sprite (0 -40px);
}
SASS and Bourbon take care of the cross browser code, and now all I have to declare is the sprite position per button. It is easy to extend this principal for the buttons active and hover states.
If you have strange errors with downloading background images use W3C Link checker: https://validator.w3.org/checklink
Here are modern mixins that I use (credits: PSA: don't use gradient generators):
.buttonAkc
{
.gradientBackground(#imageName: 'accept.png');
background-repeat: no-repeat !important;
background-position: center right, top left !important;
}
.buttonAkc:hover
{
.gradientBackgroundHover('accept.png');
}
.gradientBackground(#startColor: #fdfdfd, #endColor: #d9d9db, #imageName)
{
background-color: mix(#startColor, #endColor, 60%); // fallback
background-image: url("#{img-folder}/#{imageName}?v=#{version}"); // fallback
background: url("#{img-folder}/#{imageName}?v=#{version}") no-repeat scroll right center, -webkit-linear-gradient(top, #startColor 0%, #endColor 100%) no-repeat scroll left top; // Chrome 10-25, Safari 5.1-6
background: url("#{img-folder}/#{imageName}?v=#{version}") no-repeat scroll right center, linear-gradient(to bottom, #startColor 0%, #endColor 100%) no-repeat scroll left top;
}
.gradientBackgroundHover(#imageName)
{
.gradientBackground(#fdfdfd, #b5b6b9, #imageName);
}
If you want a gradient with a single background image in the center, you can do it with one line of code like this:
body {
background: url(logo.png) no-repeat fixed center center, linear-gradient(#00467f, #a5cc82) fixed;
}
Use background-blend-mode and rgba to mix the background image and color
This is what you need:
.myblendedbg {
background-image: url("some_image.png");
background-color: rgba(0, 0, 0, 0.85); /* use rgba for fine adjustments */
background-blend-mode: multiply;
}
If you adjust the alpha value of the rgba color value (it's at .85 in the example), you can control the transparency.
Also, background-blend-mode has other values you can play with to get some really creative results.
NOTE: background-blend-mode: color; fails on Firefox, while multiply works on all modern browsers
Here is a MIXIN that I created to handle everything that people might like to use:
.background-gradient-and-image (#fallback, #imgUrl, #background-position-x, #background-position-y, #startColor, #endColor) {
background: #fallback;
background: url(#imgUrl) #background-position-x #background-position-y no-repeat; /* fallback */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -webkit-gradient(linear, left top, left bottom, from(#startColor) #background-position-x #background-position-y no-repeat, to(#endColor)); /* Saf4+, Chrome */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -webkit-linear-gradient(top, #startColor, #endColor); /* Chrome 10+, Saf5.1+ */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -moz-linear-gradient(top, #startColor, #endColor); /* FF3.6+ */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -ms-linear-gradient(top, #startColor, #endColor); /* IE10 */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, -o-linear-gradient(top, #startColor, #endColor); /* Opera 11.10+ */
background: url(#imgUrl) #background-position-x #background-position-y no-repeat, linear-gradient(top, #startColor, #endColor); /* W3C */
}
This can be used like so:
.background-gradient-and-image (#f3f3f3, "../images/backgrounds/community-background.jpg", left, top, #fafcfd, #f2f2f2);
Hope you guys find this helpful.
credit to #Gidgidonihah for finding the initial solution.
I was trying to do the same thing. While background-color and background-image exist on separate layers within an object -- meaning they can co-exist -- CSS gradients seem to co-opt the background-image layer.
From what I can tell, border-image seems to have wider support than multiple backgrounds, so maybe that's an alternative approach.
http://articles.sitepoint.com/article/css3-border-images
UPDATE: A bit more research. Seems Petra Gregorova has something working here --> http://petragregorova.com/demos/css-gradient-and-bg-image-final.html
You could use multiple background: linear-gradient(); calls, but try this:
If you want the images to be completely fused together where it doesn't look like the elements load separately due to separate HTTP requests then use this technique. Here we're loading two things on the same element that load simultaneously...
Just make sure you convert your pre-rendered 32-bit transparent png image/texture to base64 string first and use it within the background-image css call (in place of INSERTIMAGEBLOBHERE in this example).
I used this technique to fuse a wafer looking texture and other image data that's serialized with a standard rgba transparency / linear gradient css rule. Works better than layering multiple art and wasting HTTP requests which is bad for mobile. Everything is loaded client side with no file operation required, but does increase document byte size.
div.imgDiv {
background: linear-gradient(to right bottom, white, rgba(255,255,255,0.95), rgba(255,255,255,0.95), rgba(255,255,255,0.9), rgba(255,255,255,0.9), rgba(255,255,255,0.85), rgba(255,255,255,0.8) );
background-image: url("data:image/png;base64,INSERTIMAGEBLOBHERE");
}
If you have to get gradients and background images working together in IE 9 (HTML 5 & HTML 4.01 Strict), add the following attribute declaration to your css class and it should do the trick:
filter: progid:DXImageTransform.Microsoft.gradient(GradientType=0, startColorstr='#000000', endColorstr='#ff00ff'), progid:DXImageTransform.Microsoft.AlphaImageLoader(src='[IMAGE_URL]', sizingMethod='crop');
Notice that you use the filter attribute and that there are two instances of progid:[val] separated by a comma before you close the attribute value with a semicolon. Here's the fiddle. Also notice that when you look at the fiddle the gradient extends beyond the rounded corners. I don't have a fix for that other not using rounded corners. Also note that when using a relative path in the src [IMAGE_URL] attribute, the path is relative to the document page and not the css file (See source).
This article (http://coding.smashingmagazine.com/2010/04/28/css3-solutions-for-internet-explorer/) is what lead me to this solution. It's pretty helpful for IE-specific CSS3.
I resolve the problem in that way. I define Gradient in HTML and background image in the Body
html {
background-image: -webkit-gradient(linear, left bottom, right top, color-stop(0.31, rgb(227, 227, 227)), color-stop(0.66, rgb(199, 199, 199)), color-stop(0.83, rgb(184, 184, 184)));
background-image: -moz-linear-gradient(left bottom, rgb(227, 227, 227) 31%, rgb(199, 199, 199) 66%, rgb(184, 184, 184) 83%);
height: 100%
}
body {
background: url("http://www.skrenta.com/images/stackoverflow.jpg");
height: 100%
}
this is a background image with Gradient overlay, the 26% is the opacity and 7deg is the gradient position
CSS Gradient Generator
backgroundImage: `linear-gradient(7deg, rgba(2,0,36,1) 0%, rgba(39,17,68,1) 26%, rgba(10,19,20,0.49343487394957986) 100%), url('backgroundImg.jpeg')`,
I wanted to make span button with background image, background gradient combination.
http://enjoycss.com/ helped to do my work task. Only I have to remove some auto generated additional CSS. But it's really nice site build your scratch work.
#nav a.link-style span {
background: url("../images/order-now-mobile.png"), -webkit-linear-gradient(0deg, rgba(190,20,27,1) 0, rgba(224,97,102,1) 51%, rgba(226,0,0,1) 100%);
background: url("../images/order-now-mobile.png"), -moz-linear-gradient(90deg, rgba(190,20,27,1) 0, rgba(224,97,102,1) 51%, rgba(226,0,0,1) 100%);
background: url("../images/order-now-mobile.png"), linear-gradient(90deg, rgba(170,31,0,1) 0, rgba(214,18,26,1) 51%, rgba(170,31,0,1) 100%);
background-repeat: no-repeat;
background-position: 50% 50%;
border-radius: 8px;
border: 3px solid #b30a11;
}
For my responsive design, my drop-box down-arrow on the right side of the box (vertical accordion), accepted percentage as position. Initially the down-arrow was "position: absolute; right: 13px;". With the 97% positioning it worked like charm as follows:
> background: #ffffff;
> background-image: url(PATH-TO-arrow_down.png); /*fall back - IE */
> background-position: 97% center; /*fall back - IE */
> background-repeat: no-repeat; /*fall back - IE */
> background-image: url(PATH-TO-arrow_down.png) no-repeat 97% center;
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -moz-linear-gradient(top, #ffffff 1%, #eaeaea 100%);
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -webkit-gradient(linear, left top, left bottom, color-stop(1%,#ffffff), color-stop(100%,#eaeaea));
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -webkit-linear-gradient(top, #ffffff 1%,#eaeaea 100%);
> background: url(PATH-TO-arrow_down.png) no-repeat 97% center, -o-linear-gradient(top, #ffffff 1%,#eaeaea 100%);<br />
> filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#ffffff', endColorstr='#eaeaea',GradientType=0 );
P.S. Sorry, don't know how to handle the filters.
I hope this is cross-browser enough:
(modified base from gradient editor with black to transparent vertical gradient on top of image)
background-image: url('YOURIMAGE.JPG');
background-image: -moz-linear-gradient(left, rgba(0,0,0,1) 0%, rgba(0,0,0,0) 100%),url('YOURIMAGE.JPG'); /* FF3.6-15 */
background-image: -webkit-linear-gradient(left, rgba(0,0,0,1) 0%,rgba(0,0,0,0) 100%),url('YOURIMAGE.JPG'); /* Chrome10-25,Safari5.1-6 */
background-image: linear-gradient(to right, rgba(0,0,0,1) 0%,rgba(0,0,0,0) 100%),url('YOURIMAGE.JPG'); /* W3C, IE10+, FF16+, Chrome26+, Opera12+, Safari7+ */
filter: progid:DXImageTransform.Microsoft.gradient( startColorstr='#000000', endColorstr='#00000000',GradientType=1 ), progid:DXImageTransform.Microsoft.AlphaImageLoader(src='YOURIMAGE.JPG', sizingMethod='crop'); /* IE6-9 */
As a sure method way, you can just make a background image that is say 500x5 pixels, in your css use:
background-img:url(bg.jpg) fixed repeat-x;
background:#<xxxxxx>;
Where xxxxxx corresponds with the color that matches the final gradient color.
You could also fix this to the bottom of the screen and have it match the initial gradient color.