I'm a new user of PARI/GP, and after writing my script, I wanted to make a graph of it. As my function take an integer and return a number, it's closer to a sequence. Actually, I didn't know how to do it, so I read the documentation of PARI/GP, and after that I made some test in order to obtain a graph from a list.
After reading an answer in stackoverflow (Plotting multiple lists in Pari), I wanted to test with the following code:
plothraw([0..200], apply(i->cos(i*3*Pi/200), [0..200]), 0);
But when I do it, it tries to open something on latexit, but then it crash and give me a problem report.
I didn't even know that I had an app named latextit, maybe it was install during the installation of PARI/GP. Anyway, how can I fix this?
PARI/GP definitely doesn't install latexit.
The way hi-res graphics work on the Win32 version of PARI/GP is to write down an Enhanced Metafile (.EMF) in a temp directory and ask the system to
"open" it. When you installed latexit it probably created an association in the registry to let it open .EMF files
i3Pi does not mean what you think, it just creates a new variable with that name. You want i * 3 * Pi instead.
The following constructions both work in my setup
plothraw([0..200], apply(i->cos(i*3*Pi/200), [0..200]), 0);
plothraw([0..200], apply(i->cos(i*3*Pi/200), [0..200]), 1);
(the second one being more readable because a red line is drawn between successive points; I have trouble seeing the few tiny blue dots)
Instead of apply, you can use a direct constructor as in
vector(201, i, cos((i-1) * 3 * Pi / 200))
which of course can be computed more efficiently as
real( powers(exp(3*I*Pi/200), 200) )
(of course, it doesn't matter here, but compare both commands at precision \p10000 or so ...)
I am attempting to design a front end GUI for a CLI program by the name of eac3to.exe. The problem as I see it is that this program sends all of it's output to a cmd window. This is giving me no end of trouble because I need to get a lot of this output into a GUI window. This sounds easy enough, but I am begining to wonder whether I have found one of AutoIt's limitations?
I can use the Run() function with a windows internal command such as Dir and then get the output into a variable with the AutoIt StdoutRead() function, but I just can't get the output from an external program such as eac3to.exe - it just doesn't seem to work whatever I do! Just for testing purposesI I don't even need to get the output to a a GUI window: just printing it with ConsoleWrite() is good enough as this proves that I was able to read it into a variable. So at this stage that's all I need to do - get the text (usually about 10 lines) that has been output to a cmd window by my external CLI program into a variable. Once I can do this the rest will be a lot easier. This is what I have been trying, but it never works:
Global $iPID = Run("C:\VIDEO_EDITING\eac3to\eac3to.exe","", #SW_SHOW)
Global $ScreenOutput = StdoutRead($iPID)
ConsoleWrite($ScreenOutput & #CRLF)
After running this script all I get from the consolWrite() is a blank line - not the text data that was output as a result of running eac3to.exe (running eac3to without any arguments just lists a screen of help text relating to all the commandline options), and that's what I am trying to get into a variable so that I can put it to use later in the program.
Before I suggest a solution let me just tell you that Autoit has one
of the best help files out there. Use it.
You are missing $STDOUT_CHILD = Provide a handle to the child's STDOUT stream.
Also, you can't just do RUN and immediately call stdoutRead. At what point did you give the app some time to do anything and actually print something back to the console?
You need to either use ProcessWaitClose and read the stream then or, you should read the stream in a loop. Simplest check would be to set a sleep between RUN and READ and see what happens.
#include <AutoItConstants.au3>
Global $iPID = Run("C:\VIDEO_EDITING\eac3to\eac3to.exe","", #SW_SHOW, $STDOUT_CHILD)
; Wait until the process has closed using the PID returned by Run.
ProcessWaitClose($iPID)
; Read the Stdout stream of the PID returned by Run. This can also be done in a while loop. Look at the example for StderrRead.
; If the proccess doesnt end when finished you need to put this inside of a loop.
Local $ScreenOutput = StdoutRead($iPID)
ConsoleWrite($ScreenOutput & #CRLF)
I am trying to create a key binding for "Evaluate buffer till here" in Emacs & ESS, which is situated in ESS => ESS Eval menu. Most of the commands in that menu are listed in help files (http://ess.r-project.org/Manual/ess.html, and in Emacs options), but this particular one is not. If I place following code in .emacs file:
(eval-after-load "ess-mode" '(define-key ess-mode-map (kbd "C-.") 'ess-eval-buffer-till-here))
I get a following message when trying to use the binding: Symbol´s function definition is void: ess-eval-buffer-till-here. Obviously I am calling for wrong name. What is the right name for this command and how can I see all of the commands for ESS?
So it's a menu item? Type C-hk and then select that item.
(Menus are implemented as keymaps, so this is just the normal describe-key functionality.)
You can also see the non-interactive call form of the last command with C-xESCESC or C-xM-:. It's easy to figure out the command name once you have that. (thanks event_jr)
For listing all commands, most modes will list all their key bindings in their docstring, so you can use C-hm to describe the modes in use in the buffer.
As there may be commands without bindings, you could also use M-x apropos-command to list them all (most likely specifying ^ess as a pattern, if it uses that as a consistent name space).
I have two movie clips:
mov1 has frames with labels in such sequence ("item"," btn", "win", "loose")
mov2 has frames with labels in such sequence (" ", "item", "win", "loose")
This is two standardized movie clips, which are ruled by one class MovItem.
In constructor of MovItem I init:
public function MovItem(item_mc:MovieClip )
{
this.item_mc.addEventListener( MouseEvent.CLICK, dispatchEvent );
//this.item_mc.gotoAndStop('btn');
this.item_mc.gotoAndStop(1);
}
In web version all works correctly, but in AIR 2.6 for Android it fails with error:
Error #2109: Frame label btw not found.
on gotoAndStop('btn'); on element which don't have such label.
And when I'm gotoAndStop(1); on this item all works fine.
All should be great, but 'btw' label on second movie clip is situated on second frame.
How can I fix it easily without total rework in .fla resources? Why does it works on web application, but on AIR fails? Thanx for you time.
This is actually happening in both the web version and the AIR version because mov2 has no frame called btn.
On the web version you will get a compiler warning but instead of quitting the application it just ignores the gotoAndStop(). However when compiling to AIR the compiler is in strict mode which converts compiler warnings to errors and won't allow you to compile until they are fixed.
It is bad practice anyway to call a function that you know is erronous (especially in a constructor method) so you should ether pass the frame to the constructor as a parameter (if they are going to different frame numbers) or explicitly give it the frame number e.g. gotoAndStop(2) (if they all go to the same frame number).
Also check you haven't misspelt the frame as you refer to the frame as both btn and btw in your question.
I am making a C application in Unix that uses raw tty input.
I am calling write() to characters on the display, but I want to manipulate the cursor:
ssize_t
write(int d, const void *buf, size_t nbytes);
I've noticed that if buf has the value 8 (I mean char tmp = 8, then passing &tmp), it will move the cursor/pointer backward on the screen.
I was wondering where I could find all the codes, for example, I wish to move the cursor forward but I cannot seem to find it via Google.
Is there a page that lists all the code for the write() function please?
Thank you very much,
Jary
8 is just the ascii code for backspace. You can type man ascii and look at all the values (the man page on my Ubuntu box has friendlier names for the values). If you want to do more complicated things you may want to look at a library like ncurses.
You have just discovered that character code 8 is backspace (control-H).
You would probably be best off using the curses library to manage the screen. However, you can find out what control sequences curses knows about by using infocmp to decompile the terminfo entry for your terminal. The format isn't particularly easy to understand, but it is relatively comprehensive. The alternative is to find a manual for the terminal, which tends to be rather hard.
For instance, I'm using a color Xterm window; infocmp says:
# Reconstructed via infocmp from file: /usr/share/terminfo/78/xterm-color
xterm-color|nxterm|generic color xterm,
am, km, mir, msgr, xenl,
colors#8, cols#80, it#8, lines#24, ncv#, pairs#64,
acsc=``aaffggiijjkkllmmnnooppqqrrssttuuvvwwxxyyzz{{||}}~~,
bel=^G, bold=\E[1m, clear=\E[H\E[2J, cr=^M,
csr=\E[%i%p1%d;%p2%dr, cub=\E[%p1%dD, cub1=^H,
cud=\E[%p1%dB, cud1=^J, cuf=\E[%p1%dC, cuf1=\E[C,
cup=\E[%i%p1%d;%p2%dH, cuu=\E[%p1%dA, cuu1=\E[A,
dch=\E[%p1%dP, dch1=\E[P, dl=\E[%p1%dM, dl1=\E[M, ed=\E[J,
el=\E[K, enacs=\E)0, home=\E[H, ht=^I, hts=\EH, il=\E[%p1%dL,
il1=\E[L, ind=^J,
is2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, kbs=^H,
kcub1=\EOD, kcud1=\EOB, kcuf1=\EOC, kcuu1=\EOA,
kdch1=\E[3~, kf1=\E[11~, kf10=\E[21~, kf11=\E[23~,
kf12=\E[24~, kf13=\E[25~, kf14=\E[26~, kf15=\E[28~,
kf16=\E[29~, kf17=\E[31~, kf18=\E[32~, kf19=\E[33~,
kf2=\E[12~, kf20=\E[34~, kf3=\E[13~, kf4=\E[14~,
kf5=\E[15~, kf6=\E[17~, kf7=\E[18~, kf8=\E[19~, kf9=\E[20~,
kfnd=\E[1~, kich1=\E[2~, kmous=\E[M, knp=\E[6~, kpp=\E[5~,
kslt=\E[4~, meml=\El, memu=\Em, op=\E[m, rc=\E8, rev=\E[7m,
ri=\EM, rmacs=^O, rmcup=\E[2J\E[?47l\E8, rmir=\E[4l,
rmkx=\E[?1l\E>, rmso=\E[m, rmul=\E[m,
rs2=\E[m\E[?7h\E[4l\E>\E7\E[r\E[?1;3;4;6l\E8, sc=\E7,
setab=\E[4%p1%dm, setaf=\E[3%p1%dm, sgr0=\E[m, smacs=^N,
smcup=\E7\E[?47h, smir=\E[4h, smkx=\E[?1h\E=, smso=\E[7m,
smul=\E[4m, tbc=\E[3g, u6=\E[%i%d;%dR, u7=\E[6n,
u8=\E[?1;2c, u9=\E[c,
That contains information about box drawing characters, code sequences generated by function keys, various cursor movement sequences, and so on.
You can find out more about X/Open Curses (v4.2) in HTML. However, that is officially obsolete, superseded by X/Open Curses v7, which you can download for free in PDF.
If you're using write just so you have low-level cursor control, I think you are using the wrong tool for the job. There are command codes for many types of terminal. VT100 codes, for example, are sequences of the form "\x1b[...", but rather than sending raw codes, you'd be much better off using a library like ncurses.