i get data for average time in seconds from google analytics, and i want display that data in piechart in minutes:seconds. Thank you for your answers
From pie chart Configuration Options there is no supported way for that.
Pie slice text/value is configured using option pieSliceText option and you can have none, percentage, value or name values.
For tooltip is similar: you can have both, value or percentage.
You can set your own legend with converted data from values to min:sec. How to do that is described in How to add Percentage and Total on the Legend of Google Pie Charts.
There is one completely unsupported possibility: to filter out DOM elements which contain values of your data using:
document.querySelectorAll('text[text-anchor=start]');
and than change value of element with converted value. But using that you will get at least one element which contains text and not data which should be converted. And this solution could break when google change DOM element attributes.
Related
I have the following graph in Power BI:
and I'm trying to recreate the below graph from Excel (note the X axis with the months February and January, with the Operation Text:
As you can see, my attempt only displays the Operation Text rather than the month and Operation Text).
Here is what my current axis looks like:
Changing the axis to have Actual Start Date on top, rather than the Operation Text:
Makes my graph look like this:
Is it possible to achieve the same outcome as in Excel, with the values in my graph showing the two months side by side, for each operation text? If so, how can I do this?
I've tried looking into the X axis 'format' settings and wasn't able to see anything obvious to help achieve this. In addition, unfortunately the graph I'm looking to recreate is only a screenshot so I am unable to see how it achieves that outcome.
EDIT:
As suggested, I attempted to place Operation Text into the Legend field in my Visualisations section but I am unable to, due to the fact that I have two Value fields (the two columns Actual Hours and Estimated Hours).
#CR7SMS is correct. You just need to expand down to the next level using that split arrow in the upper right of the visual so that this:
Becomes this:
Note that to get the axis to look like this, you'll need to sort on month rather than one of the measures.
You'll also want to turn off 'Concatenate labels' toggle in the 'Format > X axis' section of the visual settings.
You would have to drill down one level, using the arrows seen at the top right of your first screenshot. For your specific purposes, the split arrow should do the trick. Hope this helps.
Have you tried moving your date or operation text column in legend section ?..not 100% but something close to your requirement you can achieve
I'm trying to plot some data in Google spreadsheet:
And as you may see all of the series are in a same column and I can't use the any of the rows as headers. My plot looks like this:
I would appreciate if you could help me know how I can edit/add legend labels.
Unfortunately I don't think the graphs were intended for your data format.
The only way I've been able to work out how to add a header is by reformatting my data so I have the header at the top of my ranges.
So I suggest you split your data into separate columns so you have;
D2:D4, E2:E4, F2:F4 etc with D1, E1, and F1 as your header and then selecting "Use row 1 as your headers." From the data menu.
Alternatively, you could add labels to the series themselves. Although not ideal, it could be quicker than reformatting your data. On the data menu, click on the three dots of a data series to bring up a menu that allows you to add a label. Unfortunately this needs to be a cell so you'll have to have that header on your sheet some where.
I had the same question this year (2021), and it looks like there's support for it now. In short, you just have to double-click on the empty legend item for the series, and it'll give you a place to put text, directly in the chart.
Here's what my chart looked like (with no series titles):
If you double-click on one, you'll get a small text input area.
Type in your series name and then press enter or click outside of the input area.
Repeat this for each series, and you should be good to go.
I had the same problem because I was selecting only the data I wanted to include in the chart and not the entire table, headers and all. When you create a chart in Google Sheets and you want to use a row or column (or both) as strings that are included in the chart's labeling, you must select the entire table before choosing the Chart command from the Insert menu.
After doing so, you may need to do all or some of the following:
Switch rows/columns if your axes are not correct
Eliminate any rows/columns that you don't want represented by editing the Data Range field in the chart editor
Select Use column A as headers or Use row 1 as headers
You could also potentially use the add labels option when clicking on the 3 dots in the series section:
Double-click on the symbols in your legend, then double-click on the symbol for the series you would like to label; you should be able to directly enter your legend label now. You can do further text formatting using the chart editor on the right.
I took them to a new sheet. first selected only the X-axis and one of the columns that will appear as one. label. In this sheet, I made all the "labels" as a header of the sheet. and added them one by one as a series. and this time it. add them as a label.
obviously this is a workaround and the bug should be fixed :) hopefully.
I want to plot stacked column graph through Shinobi.
Please referer attached screen shot for desired graph.
Can anyone please suggest how to pass data point for the same.
Disclaimer: I am a developer at Shinobi Controls.
To get columns to stack you need to create a series for each column you wish to stack.
To get the series to stack, you must set each series' "stackIndex" property to the same value.
For example, in your image you will need 5 SChartColumnSeries with their "stackIndex" value set to the same value, lets say 1.
Now you can add one datapoint for each series with the same X value but with different Y values.
I have a crossfilter.dimension. How do I get the current filter set on it (for example if it was set by a brush from a chart)?
Example:
dimension.filterRange([1,15]) // returns dimension
Given this filtered dimension, how do I get the values 1 and 15 out?
Stumbled on this old question because it is the top-voted unanswered crossfilter question, with 1k views!
This feature was contributed by Thomas Gillet in 1.4.5 as dimension.currentFilter()
The tough remaining problem: when you get beyond filterExact and filterRange, the more complex filters use filterFunction. You might be able to retrieve the function but functions are essentially opaque.
For example, if you are using dc.js, it will generate a filter function when
multiple items are selected in pie chart, row chart, or bar chart with ordinal dimension
the chart has a two-dimensional filter, like the scatter plot or the heatmap
For this reason, if you're using dc.js, you should use chart.filters() instead.
Thank you, Gordon. This was really helpful to me! One note - your link is correct -- it goes to filters(), but the text displays as chart.filter() which is in the API, but doesn't return multiple filters on a chart. I tried to edit your answer, but it won't allow single character changes!
I want to make a line chart that allows the user to select a date range for the data. For example if the date range span is more than 1 month, I want to to have a bar that shows the months, also if the date range is around 30 days or less I want it to show the dates for each day as well. Something like that.
Does anyone have any suggestions?
Thanks!
I would suggest using a DateTimeAxis, and setting the labelUnits property to "days" or "months" as appropriate. The axis will then do all the hard work of grouping your data accordingly.
In your particular case, when the user makes a choice from the combo box, you should have a handler that computes how granular to make the x-axis based on the user's date selections.