I'm trying to test a Laravel 5.1 controller with PhpUnit, for that im creating a class inheriting from TestCase, and using DatabaseTransactions and WithoutMiddleware traits.
Within the class im implementing the setUpBeforeClass method which contains:
Artisan::call('migrate:refresh');
When i try to run the test I get the following error:
1) JugadoresControllerTest::test_Index_trae_arreglo_de_jugadores
ErrorException: explode() expects parameter 2 to be string, array given
/home/vagrant/.composer/vendor/illuminate/support/helpers.php:390
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Support/Arr.php:319
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Support/Collection.php:428
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Database/Query/Builder.php:1548
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Database/Migrations/DatabaseMigrationRepository.php:53
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Database/Migrations/Migrator.php:79
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Database/Console/Migrations/MigrateCommand.php:74
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Container/Container.php:503
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Console/Command.php:150
/home/vagrant/Code/marcadores/vendor/symfony/symfony/src/Symfony/Component/Console/Command/Command.php:259
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Console/Command.php:136
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Console/Application.php:62
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Foundation/Console/Kernel.php:152
/home/vagrant/Code/marcadores/vendor/laravel/framework/src/Illuminate/Support/Facades/Facade.php:210
/home/vagrant/Code/marcadores/tests/unit/JugadoresControllerTest.php:34
/home/vagrant/Code/marcadores/tests/unit/JugadoresControllerTest.php:34
/home/vagrant/.composer/vendor/phpunit/phpunit/src/TextUI/Command.php:151
/home/vagrant/.composer/vendor/phpunit/phpunit/src/TextUI/Command.php:103
Hope anyone can helpme!
I don't know if you ever figured this out, but I ran into a similar problem when trying to run phpunit tests under laravel 5.1. Apparently I had some out-of-date vendor builds on my global composer install (as reverenced by your error: /home/vagrant/.composer/vendor/illuminate/support/helpers.php:390)
All I did was cd to my composer directory:
cd /home/vagrant/.composer and ran composer update
This updated my global composer and everything worked as expected.
I'm new with symfony2 and i wnat to test my app using behat but when I followed the official install in this link http://docs.behat.org/en/latest/cookbooks/1.symfony2_integration.html#installing-and-enabling-symfony2-extension
i got this error :
[Behat\Behat\Context\Exception\ContextNotFoundException]
FeatureContext context class not found and can not be used.
it was just after the first line and when i ran the bin/behat command.
When using the Symfony2Extension, you are responsible for handling the autoloading. Make sure the FeatureContext class can be autoloaded by changing your composer.json autoload configuration and running composer dump-autoload.
I have phpunit 3.6.12 installed as well as Silex. In the root directory of my app I have tests directory which contains the trivial test file BlogFunctionTest.php
<?
use Silex\WebTestCase;
// BLOG: Front end test
class BlogFunctionalTest extends Silex\WebTestCase
{
public function testIndex()
{
$this->assertGreaterThan(0, 1);
}
}
?>
when I run phpunit from the command line I get the error
PHP Fatal error: Class 'Silex\WebTestCase' not found in {path}/BlogFunctionTest.php line 7
which refers to the line where I try to extend WebTestCase. The same happens if I replace
use Silex\WebTestCase;
with
use Symfony\Bundle\FrameworkBundle\Test\WebTestCase;
Silex is installed in relative to my test file at
../vendor/silex/
Any tips are greatly appreciated, thank you!
you have to define a bootstrap inside phpunit.xml.dist which point to the bootstrap of your silex application like it's done here https://github.com/joshuamorse/Silex-Boilerplate/blob/master/phpunit.xml.dist
Sorry for another 'phpunit doesn't work' question. It used to work for years now. Today I reinstalled PEAR and phpunit for reasons not connected to this problem. Now when I run phpunit as I usually did. Nothing happens. The cli just shows me a new line, no output whatsoever.
Has anyone encountered this problem or has an idea what could have caused it.
PHPUnit Version: 3.5.15
PEAR Version: 1.9.4
PHP Version: 5.3.8
Windows 7
I'm on OSX and MAMP. To get error messages I had to adjust the following entries in php.ini:
display_errors = On
display_startup_errors = On
Please not that this has to go into /Applications/MAMP/bin/php/php5.3.6/conf/php.ini .
For future reference, for those who are facing any problem with PHPUnit, and PHPUnit is failing silently, just add this three lines inside phpunit.xml:
<phpunit ....... >
...
...
<php>
<ini name="display_errors" value="true"/>
</php>
</phpunit>
After that run the tests again, and now you can see why PHPUnit is failing,
AND ... ENJOY UNIT TESTING :)
I know the orignal poster's question is already answered, but just for any people searching in the future: one thing that can cause PHPUnit to fail silently (i.e. it just stops running tests without telling you why) is that it has an error handler that it set up before each test run, which is intended to capture errors and display them at the end of the test run. The problem is that certain errors halt execution of the whole test run.
What I generally do when this happens, as a first step, is reset the error handler to something that will immediately output the error message. In my base test class I have a method called setVerboseErrorHandler, which I'll call at the top of the test (or in setUp) when this happens. The below requires php 5.3 or higher (due to the closure), so if you're on 5.2 or lower you can make it a regular function.
protected function setVerboseErrorHandler()
{
$handler = function($errorNumber, $errorString, $errorFile, $errorLine) {
echo "
ERROR INFO
Message: $errorString
File: $errorFile
Line: $errorLine
";
};
set_error_handler($handler);
}
Create the simplest test class you can without a bootstrap.php or phpunit.xml to first verify that your new installation works. PHPUnit will stop without any message if it cannot instantiate all of the test cases--one for each test method and data provider--before running any tests.
You have already figured out how to get it to work, but my solution was a little different.
First thing you can do is check the exit status. If it's not 0, then PHP exited and because of the INI configuration settings set, none of the PHP error messages were outputted. What I did was to enable the "display_errors" INI setting, and set "error_reporting" to E_ALL. I was then able to identify errors such as PHP not being able to parse a certain script. Once I fixed that, PHPUnit ran properly.
I managed to spectacularly paint myself in a corner with a custom "fatal error handler" that in certain rare conditions turned out to output nothing. Those conditions, in accordance with Murphy's Law, materialized once I had forgotten the handler was in place.
Since it wasn't really a "PHPunit problem", none of the other answers helped [although #David's problem was at the bottom the same thing], even though the symptoms were the same - phpunit terminating with no output, no errors, no log and no clue.
In the end I had to resort to a step-by-step tracing of the whole test suite by adding this in the bootstrap code:
register_shutdown_function(function() {
foreach ($GLOBALS['lastStack'] as $i => $frame) {
print "{$i}. {$frame['file']} +{$frame['line']} in function {$frame['function']}\n";
}
});
register_tick_function(function() {
$GLOBALS['lastStack'] = debug_backtrace(DEBUG_BACKTRACE_IGNORE_ARGS, 8);
});
declare(ticks=1);
If anyone ever manages to do worse than this, and somehow block stdout as well, this modification should work:
register_shutdown_function(function() {
$fp = fopen("/tmp/path-to-debugfile.txt", "w");
foreach ($GLOBALS['lastStack'] as $i => $frame) {
fwrite($fp, "{$i}. {$frame['file']} +{$frame['line']} in function {$frame['function']}\n");
}
fclose($fp);
});
an old thread this one, but one I stumbled across when having the same problem.
I had the same problem, nothing being returned to console including print, print_r, echo etc.
solved it by using --stderr as a test-runner option.
Check that you haven't written any logic into your code that just dies, with no output. For example,
<?php
if (!array_key_exists('SERVER_NAME', $_SERVER)) {
die();
}
This was exactly my case; I'd made some assumptions about the environment which were correct when running the code via Apache, but weren't fulfilled when running from CLI and the code did not echo any output.
PHPUnit tried to include the bootstrap file before giving the usual init output, but died during the bootstrapping proccess, hence exiting with status 0 and no output.
If when you run from command line a recent version of phpunit like this
> php phpunit
or
> ./phpunit
or
> php ./phpunit.phar
or
> ./phpunit.phar
And you immediatly return to the prompt with no messages, this is probably due to a "suhosin secutiry" setup.
phpunit is now a "phar" package including all libraries. To be able to run such file when php has the suhosin security module enabled, you must first set this
suhosin.executor.include.whitelist = phar
into you php.ini file (for example, with debian/ubuntu, you may have to edit file /etc/php5/conf.d/suhosin.ini
i tried everything here, but nothing worked until i tried phpunit --no-configuration simpletest.php. that finally gave me some output, which implies that my phpunit.xml.dist file is broken. (i'll come back and update this once i debug it.)
the contents of simpletest.php are below, but any test file should work.
<?php
use PHPUnit\Framework\TestCase;
final class FooTest extends TestCase
{
public function testFoo()
{
$this->assertEquals('x', 'y');
}
}
Check if the phpunit you're running and the one you installed are the same:
$ pear list phpunit/phpunit
...
script /path/to/phpunit
...
Try to execute exactly that phpunit with the full path.
Then check your PATH variable and see if the correct directory is in it. If not, fix that.
If that does not help, use write something into the phpunit executable, e.g. "echo 123;" and run phpunit. Check if you see that.
For me the conflict was with Xdebug's directive
xdebug.remote_enable=1
If you are using composer, check to make sure your included PHP files are not ending the code executions. The same goes for when you included certain PHP files explicitly.
In my case, I was working on a WordPress plugin and one of the PHP files I included directly in composer.json (which I don't want to load through PSR-4 because WordPress's coding standards don't support it yet) had this code on top;
if (!defined('ABSPATH')) {
exit(); // exit if accessed directly
}
And since ABSPATH will not be defined when I run the tests directly, the code was exiting.
This is because, since I told Composer to always load these files each time, this part of the code will execute, while the other files included though autoload PSR will load on demand.
So check to make sure any of the files you included are not stopping the code execution. If it happens, then even when you run phpunit --info the code will still exit and you won't see any output.
I was facing a seems problem. I could run phpunit from root directory but not from anywhere else. so I put the "--configuration" tag, and point it to my xml configuration.
$ ./<path_to_phpunit>phpunit --configuration <path_to_phpunitxml>/phpunit.xml
The path to phpunit is optinal, I used it because I installed locally by composer.
In /composer/vendor/phpunit/phpunit/src/TextUI/Command.php in main() function in catch (Throwable $t) {} block var_dump (echo / print_r) exception. If an exception exists, you, probably, will solve the current problem.
I am trying to implement item rendere example from TourdeFlex application. However, when I tried to run the application its giving me " could not resolve to a component implementation" error message beside the local items. I also added the assets folder and verified the visualization.swc.
Please let me know the solution to fix the issue.
THanks in advance.
Serenity.
local is XML namespace declared at the top of example, its like import in ActionScript. "Could not resolve" means referenced class is not found. Look at that namespace to determine where it must be placed. For example, xmlns:gui="gui.*" declares namespace gui which references classes from folder "gui".
Edit: xmlns:local="*" means "import all files from src directory". In src should be file Item.mxml or Item.as and it is missing (or failed to compile).