I had an ASP.NET Core 1.1 application, which was upgraded from Visual Studio 2015 using project.json to Visual Studio 2017 with the MsBuild csproj standard. The app is deployed to a docker container on linux, where the official images from microsoft are used. BundlerMinifier were missing. But only on docker, not in Visual Studio 2017 and not using dotnet publish on Windows 10.
I found out, that the bundles were generated. But in the wwwroot folder of the solution, not in the publish output folder (passed by --output to dotnet publish). Lets say, I have /app where my VS solution is located in the docker container. Now I run dotnet publish --output /app/output. My bundled files are now in /app/src/{projectName}/wwwroot instead of /app/output/wwwroot where I need them.
I use relative paths in the bundleconfig.json like this:
[
{
"minify": { "enabled": false },
"outputFileName": "wwwroot/site.min.css",
"inputFiles": [
"wwwroot/lib/my-input-file.css"
]
}
]
To create the bundle, I have the following publishing scripts in my csproj file
<Target Name="PrepublishScript" BeforeTargets="PrepareForPublish">
<Exec Command="bower install" />
<Exec Command="dotnet bundle" />
</Target>
I'm not very familar with MsBuild. But according to some researchs, the following lines seems responsible to copy files to the output directory (like wwwroot)
<ItemGroup>
<None Update="wwwroot\**\*;Views\**\*.cshtml;Areas\**\*.cshtml">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</None>
</ItemGroup>
Since wwwroot is already included here and the copying of other files like Views works, I thought there is an issue about execution ordner. Something like MsBuild copy the files before MsBuild is publishing them. But this seems not possible from the logic, since this is done before PrepareForPublish target, which is - according to Microsoft docs - the right way.
That's because you don't include the files in the wwwroot.
<ItemGroup>
<None Update="wwwroot\**\*;Views\**\*.cshtml;Areas\**\*.cshtml">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</None>
</ItemGroup>
wwwroot\**\* will only copy over the files in subfolders of wwwroot (at least this was still the case with the old project.json structure), but your css file is in wwwroot/site.min.css. So either move them to wwwroot/css/site.min.css. Or easier: Just publish the copy over the whole wwwroot folder (and keep your libs files outside of wwwroot, like in bower_modules or npm_modules):
Also I'm not sure of <None> is the right tag for it. In my project's csproj there is only <None Include="App.config" /> and the files I copy over are in <Content>, like below
<ItemGroup>
<None Include="App.config" />
<Content Update="wwwroot;Views;Areas;appsettings.json;web.config">
<CopyToPublishDirectory>PreserveNewest</CopyToPublishDirectory>
</Content>
</ItemGroup>
As you shouldn't have any unrelated files in Views and Areas it's easier to copy over the whole folders too.
i have created on batch "del.bat".below is my batch script which is define in "del.bat"
I wanted to delete folder using batch after clicking "del.bat".when i am go to click "del.bat",nothing is happened.please let me know how to run it
<Project>
xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<Target Name="clean_folders">
<RemoveDir Directories="D:\projectdemo\crick\Cart"
ContinueOnError="true" />
</Target>
</Project>
c:
cd C:\\Program Files (x86)\\Microsoft Visual Studio 10.0\\VC
MSBuild.exe D:\projectdemo\demo.csproj /t:clean_folders>D:\projectdemo\output.txt
MSBuild is not located in the Visual Studio VC folder. This is the default folder where Command Prompt point to : the VS tools are located here.
MSBuild is not part of Visual Studio but of the .NET Framework.
MSBuild 4 (Visual Studio 2010) x86 is located in the Framework v4.0 folder :
"C:\WINDOWS\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe"
D:\projectdemo\demo.csproj /t:clean_folders >
D:\projectdemo\output.txt
I'm trying to make Visual Studio precompile my ASP.NET application that will be deployed on Azure. I've added the following to my .csproj file:
<Target Name="AfterBuild">
<Message Text="Starting AspNetCompiler for $(ProjectDir)" Importance="high" />
<AspNetCompiler
VirtualPath="/"
PhysicalPath="$(ProjectDir)"
/>
</Target>
Now when I ask Visual Studio to prepare a service package the following appears in the build output:
Starting AspNetCompiler for [PathToMyProject]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compiler.exe -v / -p [PathToMyProject]
If I plant an error in any of the view files that error is identified and breaks the build so clearly the precompilation is perfomed.
Yet I don't see any new .NET assemblies anywhere in the results.
How do I make ASP.NET compiler create the .NET assemblies for the views?
If you don't specify an output directory you should find the output in this folder:
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Temporary ASP.NET Files\root\some-random-id (try sorting on the date modified to find the latest directory).
When calling the aspnet_compiler.exe you can also append an output folder to the command:
aspnet_compiler -v "/" -p "C:\Projects\WebApplication1\WebApplication1" C:\CompileOutput
Here you see the output in my C:\CompiledOutput folder
I want Visual Studio to precompile my ASP.NET application which is used as an Azure web role payload. So I've found this post that explains how to call aspnet_compiler to validate views.
I tried to add the following to "post-build event" of my ASP.NET application:
call "%VS100COMNTOOLS%\vsvars32.bat"
aspnet_compiler -v / -p $(ProjectDir)
or alternatively this (application name specified explicitly):
call "%VS100COMNTOOLS%\vsvars32.bat"
aspnet_compiler -v /ASP.NET-Application-ProjectNameHere -p $(ProjectDir)
In both cases when the build runs I see the following in the build output:
Setting environment for using Microsoft Visual Studio 2010 x86 tools.
Utility to precompile an ASP.NET application
Copyright (C) Microsoft Corporation. All rights reserved.
and clearly no precompilation happens because if I change any .aspx or .cshtml file "Build Action" to "None" it doesn't get to the Azure service package and the view no longer opens once the package is deployed to Azure.
How do I setup aspnet_compiler for precompiling from within Visual Studio?
If you want to use Asp.NET Compiler within your Visual Studio / msbuild then you can add
AspNetCompiler Task to your project file (.csproj/.vbproj) and set MvcBuildViews to true.
Example:
<Project>
<PropertyGroup>
<MvcBuildViews>true</MvcBuildViews>
</PropertyGroup>
<!-- ... -->
<Target Name="PrecompileWeb" AfterTargets="build" Condition="'$(MvcBuildViews)'=='true'">
<Message Text="Starting AspNetCompiler for $(ProjectDir)" Importance="high" />
<AspNetCompiler
VirtualPath="temp"
PhysicalPath="$(WebProjectOutputDir)"
Force="true"
/>
</Target>
<!-- ... -->
</Project>
You may also set TargetPath attribute to specify destination directory.
AfterTargets="build" is similar to "post-build event". See Target Build Order for more.
Integrate ASPX compilation into Visual Studio
One of the principles I insist on is to always try my build on a clean environment and simulate installation as if it was done by QA. Lately I've noticed that I keep falling on errors hidden deep in the aspx files. So, why not using the old and familiar aspnet_compiler.exe tool? It is located at C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727 and it is quite easy to use.
As a VS add-ins freak I've started thinking on an amazing add-in that will integrate to the VS and will listen to build events and display the results at the output pane. Heck, why not add some coffee serving capabilities?
It took me about 10 minutes of googling to stumble on this blog. Mike Hadlow had a genius in its simplicity idea. Use the POST BUILD EVENT!
All I need to do is put the following line in the post build event: C:\WINDOWS\Microsoft.NET\Framework\v2.0.50727\aspnet_compiler.exe -v / -p "$(ProjectDir)\"
Now, All that is left is to make the process of adding this line to each and every web project in our team to be automatic.
I have just the add-in for that :)
enter link description here
The answer from Matej was helpful for me, but I was not able to use it as-is and still get it to work for both local builds within Visual Studio and automated builds via TFS.
I had to add some extra msbuild settings. Actually, there were 2 different scenarios that I had. One project was an Web App that built into the _PublishedWebsites folder and one was an MVC Web App that did not build into the _PublishedWebsites folder.
First, add the following if it is not already in your project file:
<PropertyGroup>
<MvcBuildViews>true</MvcBuildViews>
</PropertyGroup>
For the one WITH _PublishedWebsites:
<Choose>
<When Condition="'$(BuildingInsideVisualStudio)' == true">
<PropertyGroup>
<AspNetCompilerPhysicalPath>$(ProjectDir)</AspNetCompilerPhysicalPath>
</PropertyGroup>
</When>
<Otherwise>
<PropertyGroup>
<AspNetCompilerPhysicalPath>$(WebProjectOutputDir)</AspNetCompilerPhysicalPath>
</PropertyGroup>
</Otherwise>
</Choose>
<Target Name="PrecompileWeb" AfterTargets="build" Condition="'$(MvcBuildViews)'=='true'">
<!-- aspnet_compiler.exe needs to be run on the folder that has the aspx files and the "bin" subfolder.
When running locally, the value needs to be the project directory, which is $(ProjectDir).
When running the TFS build, the value needs to be (BuildFolder)\(ProjectName)\_PublishedWebsites\(ProjectName).
The $(AspNetCompilerPhysicalPath) will hold the correct value for both types of builds.
-->
<Message Text="Starting AspNetCompiler for $(ProjectName) at $(AspNetCompilerPhysicalPath)" Importance="high" />
<AspNetCompiler
VirtualPath="/"
PhysicalPath="$(AspNetCompilerPhysicalPath)"
TargetPath="$(AspNetCompilerPhysicalPath)\bin_precompile"
Force="true"
/>
</Target>
For the one WITHOUT _PublishedWebsites:
<Choose>
<When Condition="'$(BuildingInsideVisualStudio)' == true">
<PropertyGroup>
<AspNetCompiler_CopyFilesFirst>false</AspNetCompiler_CopyFilesFirst>
</PropertyGroup>
</When>
<Otherwise>
<PropertyGroup>
<AspNetCompiler_CopyFilesFirst>true</AspNetCompiler_CopyFilesFirst>
</PropertyGroup>
<ItemGroup>
<AllOutputFiles Include="$(OutDir)\\**\*.*" />
</ItemGroup>
</Otherwise>
</Choose>
<Target Name="PrecompileWeb" AfterTargets="build" Condition="'$(MvcBuildViews)'=='true'">
<!-- aspnet_compiler.exe needs to be run on the folder that has the cshtml files and the "bin" subfolder. I could not find a setting that was appropriate for both.
When running locally, the value needs to be the project directory, which is $(ProjectDir).
When running the TFS build, there is no folder that matches both of those criteria.
So first we will copy the output into the source code folder's "bin" subfolder,
then run it against the source $(ProjectDir), the same as if we were building locally.
-->
<Message Text="Before running AspNetCompiler, copy files from $(OutDir) to $(ProjectDir)\bin" Importance="high" />
<Exec Command="( robocopy.exe /mir $(OutDir) $(ProjectDir)\bin ) ^& IF %25ERRORLEVEL%25 LEQ 1 exit 0" Condition="'$(AspNetCompiler_CopyFilesFirst)'=='true'" />
<Message Text="Starting AspNetCompiler for $(ProjectName) at $(ProjectDir)" Importance="high" />
<AspNetCompiler
VirtualPath="/"
PhysicalPath="$(ProjectDir)"
TargetPath="$(ProjectDir)\bin_precompile"
Force="true"
/>
</Target>
Visual Studio 2010 has a Publish command that allows you to publish your Web Application Project to a file system location. I'd like to do this on my TeamCity build server, so I need to do it with the solution runner or msbuild. I tried using the Publish target, but I think that might be for ClickOnce:
msbuild Project.csproj /t:Publish /p:Configuration=Deploy
I basically want to do exactly what a web deployment project does, but without the add-in. I need it to compile the WAP, remove any files unnecessary for execution, perform any web.config transformations, and copy the output to a specified location.
My Solution, based on Jeff Siver's answer
<Target Name="Deploy">
<MSBuild Projects="$(SolutionFile)"
Properties="Configuration=$(Configuration);DeployOnBuild=true;DeployTarget=Package"
ContinueOnError="false" />
<Exec Command=""$(ProjectPath)\obj\$(Configuration)\Package\$(ProjectName).deploy.cmd" /y /m:$(DeployServer) -enableRule:DoNotDeleteRule"
ContinueOnError="false" />
</Target>
I got it mostly working without a custom msbuild script. Here are the relevant TeamCity build configuration settings:
Artifact paths: %system.teamcity.build.workingDir%\MyProject\obj\Debug\Package\PackageTmp
Type of runner: MSBuild (Runner for MSBuild files)
Build file path: MyProject\MyProject.csproj
Working directory: same as checkout directory
MSBuild version: Microsoft .NET Framework 4.0
MSBuild ToolsVersion: 4.0
Run platform: x86
Targets: Package
Command line parameters to MSBuild.exe: /p:Configuration=Debug
This will compile, package (with web.config transformation), and save the output as artifacts. The only thing missing is copying the output to a specified location, but that could be done either in another TeamCity build configuration with an artifact dependency or with an msbuild script.
Update
Here is an msbuild script that will compile, package (with web.config transformation), and copy the output to my staging server
<?xml version="1.0" encoding="utf-8" ?>
<Project DefaultTargets="Build" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<Configuration Condition=" '$(Configuration)' == '' ">Release</Configuration>
<SolutionName>MySolution</SolutionName>
<SolutionFile>$(SolutionName).sln</SolutionFile>
<ProjectName>MyProject</ProjectName>
<ProjectFile>$(ProjectName)\$(ProjectName).csproj</ProjectFile>
</PropertyGroup>
<Target Name="Build" DependsOnTargets="BuildPackage;CopyOutput" />
<Target Name="BuildPackage">
<MSBuild Projects="$(SolutionFile)" ContinueOnError="false" Targets="Rebuild" Properties="Configuration=$(Configuration)" />
<MSBuild Projects="$(ProjectFile)" ContinueOnError="false" Targets="Package" Properties="Configuration=$(Configuration)" />
</Target>
<Target Name="CopyOutput">
<ItemGroup>
<PackagedFiles Include="$(ProjectName)\obj\$(Configuration)\Package\PackageTmp\**\*.*"/>
</ItemGroup>
<Copy SourceFiles="#(PackagedFiles)" DestinationFiles="#(PackagedFiles->'\\build02\wwwroot\$(ProjectName)\$(Configuration)\%(RecursiveDir)%(Filename)%(Extension)')"/>
</Target>
</Project>
You can also remove the SolutionName and ProjectName properties from the PropertyGroup tag and pass them to msbuild.
msbuild build.xml /p:Configuration=Deploy;SolutionName=MySolution;ProjectName=MyProject
Update 2
Since this question still gets a good deal of traffic, I thought it was worth updating my answer with my current script that uses Web Deploy (also known as MSDeploy).
<Project xmlns="http://schemas.microsoft.com/developer/msbuild/2003" DefaultTargets="Build" ToolsVersion="4.0">
<PropertyGroup>
<Configuration Condition=" '$(Configuration)' == '' ">Release</Configuration>
<ProjectFile Condition=" '$(ProjectFile)' == '' ">$(ProjectName)\$(ProjectName).csproj</ProjectFile>
<DeployServiceUrl Condition=" '$(DeployServiceUrl)' == '' ">http://staging-server/MSDeployAgentService</DeployServiceUrl>
</PropertyGroup>
<Target Name="VerifyProperties">
<!-- Verify that we have values for all required properties -->
<Error Condition=" '$(ProjectName)' == '' " Text="ProjectName is required." />
</Target>
<Target Name="Build" DependsOnTargets="VerifyProperties">
<!-- Deploy using windows authentication -->
<MSBuild Projects="$(ProjectFile)"
Properties="Configuration=$(Configuration);
MvcBuildViews=False;
DeployOnBuild=true;
DeployTarget=MSDeployPublish;
CreatePackageOnPublish=True;
AllowUntrustedCertificate=True;
MSDeployPublishMethod=RemoteAgent;
MsDeployServiceUrl=$(DeployServiceUrl);
SkipExtraFilesOnServer=True;
UserName=;
Password=;"
ContinueOnError="false" />
</Target>
</Project>
In TeamCity, I have parameters named env.Configuration, env.ProjectName and env.DeployServiceUrl. The MSBuild runner has the build file path and the parameters are passed automagically (you don't have to specify them in Command line parameters).
You can also run it from the command line:
msbuild build.xml /p:Configuration=Staging;ProjectName=MyProject;DeployServiceUrl=http://staging-server/MSDeployAgentService
Using the deployment profiles introduced in VS 2012, you can publish with the following command line:
msbuild MyProject.csproj /p:DeployOnBuild=true /p:PublishProfile=<profile-name> /p:Password=<insert-password> /p:VisualStudioVersion=11.0
For more information on the parameters see this.
The values for the /p:VisualStudioVersion parameter depend on your version of Visual Studio. Wikipedia has a table of Visual Studio releases and their versions.
I came up with such solution, works great for me:
msbuild /t:ResolveReferences;_WPPCopyWebApplication /p:BuildingProject=true;OutDir=C:\Temp\build\ Test.csproj
The secret sauce is _WPPCopyWebApplication target.
I don't know TeamCity so I hope this can work for you.
The best way I've found to do this is with MSDeploy.exe. This is part of the WebDeploy project run by Microsoft. You can download the bits here.
With WebDeploy, you run the command line
msdeploy.exe -verb:sync -source:contentPath=c:\webApp -dest:contentPath=c:\DeployedWebApp
This does the same thing as the VS Publish command, copying only the necessary bits to the deployment folder.
With VisualStudio 2012 there is a way to handle subj without publish profiles. You can pass output folder using parameters. It works both with absolute and relative path in 'publishUrl' parameter. You can use VS100COMNTOOLS, however you need to override VisualStudioVersion to use target 'WebPublish' from %ProgramFiles%\MSBuild\Microsoft\VisualStudio\v11.0\WebApplications\Microsoft.WebApplication.targets. With VisualStudioVersion 10.0 this script will succeed with no outputs :)
Update: I've managed to use this method on a build server with just Windows SDK 7.1 installed (no Visual Studio 2010 and 2012 on a machine). But I had to follow these steps to make it work:
Make Windows SDK 7.1 current on a machine using Simmo answer (https://stackoverflow.com/a/2907056/2164198)
Setting Registry Key HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\VisualStudio\SxS\VS7\10.0 to "C:\Program Files\Microsoft Visual Studio 10.0\" (use your path as appropriate)
Copying folder %ProgramFiles%\MSBuild\Microsoft\VisualStudio\v11.0 from my developer machine to build server
Script:
set WORK_DIR=%~dp0
pushd %WORK_DIR%
set OUTPUTS=%WORK_DIR%..\Outputs
set CONFIG=%~1
if "%CONFIG%"=="" set CONFIG=Release
set VSTOOLS="%VS100COMNTOOLS%"
if %VSTOOLS%=="" set "PATH=%PATH%;%WINDIR%\Microsoft.NET\Framework\v4.0.30319" && goto skipvsinit
call "%VSTOOLS:~1,-1%vsvars32.bat"
if errorlevel 1 goto end
:skipvsinit
msbuild.exe Project.csproj /t:WebPublish /p:Configuration=%CONFIG% /p:VisualStudioVersion=11.0 /p:WebPublishMethod=FileSystem /p:publishUrl=%OUTPUTS%\Project
if errorlevel 1 goto end
:end
popd
exit /b %ERRORLEVEL%
found two different solutions which worked in slightly different way:
1. This solution is inspired by the answer from alexanderb [link]. Unfortunately it did not work for us - some dll's were not copied to the OutDir. We found out that replacing ResolveReferences with Build target solves the problem - now all necessary files are copied into the OutDir location.
msbuild /target:Build;_WPPCopyWebApplication /p:Configuration=Release;OutDir=C:\Tmp\myApp\ MyApp.csproj
Disadvantage of this solution was the fact that OutDir contained not only files for publish.
2. The first solution works well but not as we expected. We wanted to have the publish functionality as it is in Visual Studio IDE - i.e. only the files which should be published will be copied into the Output directory. As it has been already mentioned first solution copies much more files into the OutDir - the website for publish is then stored in _PublishedWebsites/{ProjectName} subfolder. The following command solves this - only the files for publish will be copied to desired folder. So now you have directory which can be directly published - in comparison with the first solution you will save some space on hard drive.
msbuild /target:Build;PipelinePreDeployCopyAllFilesToOneFolder /p:Configuration=Release;_PackageTempDir=C:\Tmp\myApp\;AutoParameterizationWebConfigConnectionStrings=false MyApp.csproj
AutoParameterizationWebConfigConnectionStrings=false parameter will guarantee that connection strings will not be handled as special artifacts and will be correctly generated - for more information see link.
this is my working batch
publish-my-website.bat
SET MSBUILD_PATH="C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\MSBuild\15.0\Bin"
SET PUBLISH_DIRECTORY="C:\MyWebsitePublished"
SET PROJECT="D:\Github\MyWebSite.csproj"
cd /d %MSBUILD_PATH%
MSBuild %PROJECT% /p:DeployOnBuild=True /p:DeployDefaultTarget=WebPublish /p:WebPublishMethod=FileSystem /p:DeleteExistingFiles=True /p:publishUrl=%PUBLISH_DIRECTORY%
Note that I installed Visual Studio on server to be able to run MsBuild.exe because the MsBuild.exe in .Net Framework folders don't work.
You must set your environments
< WebSite name>
< domain>
and reference my blog.(sorry post was Korean)
http://xyz37.blog.me/50124665657
http://blog.naver.com/PostSearchList.nhn?SearchText=webdeploy&blogId=xyz37&x=25&y=7
#ECHO OFF
:: http://stackoverflow.com/questions/5598668/valid-parameters-for-msdeploy-via-msbuild
::-DeployOnBuild -True
:: -False
::
::-DeployTarget -MsDeployPublish
:: -Package
::
::-Configuration -Name of a valid solution configuration
::
::-CreatePackageOnPublish -True
:: -False
::
::-DeployIisAppPath -<Web Site Name>/<Folder>
::
::-MsDeployServiceUrl -Location of MSDeploy installation you want to use
::
::-MsDeployPublishMethod -WMSVC (Web Management Service)
:: -RemoteAgent
::
::-AllowUntrustedCertificate (used with self-signed SSL certificates) -True
:: -False
::
::-UserName
::-Password
SETLOCAL
IF EXIST "%SystemRoot%\Microsoft.NET\Framework\v2.0.50727" SET FXPath="%SystemRoot%\Microsoft.NET\Framework\v2.0.50727"
IF EXIST "%SystemRoot%\Microsoft.NET\Framework\v3.5" SET FXPath="%SystemRoot%\Microsoft.NET\Framework\v3.5"
IF EXIST "%SystemRoot%\Microsoft.NET\Framework\v4.0.30319" SET FXPath="%SystemRoot%\Microsoft.NET\Framework\v4.0.30319"
SET targetFile=<web site fullPath ie. .\trunk\WebServer\WebServer.csproj
SET configuration=Release
SET msDeployServiceUrl=https://<domain>:8172/MsDeploy.axd
SET msDeploySite="<WebSite name>"
SET userName="WebDeploy"
SET password=%USERNAME%
SET platform=AnyCPU
SET msbuild=%FXPath%\MSBuild.exe /MaxCpuCount:%NUMBER_OF_PROCESSORS% /clp:ShowCommandLine
%MSBuild% %targetFile% /p:configuration=%configuration%;Platform=%platform% /p:DeployOnBuild=True /p:DeployTarget=MsDeployPublish /p:CreatePackageOnPublish=False /p:DeployIISAppPath=%msDeploySite% /p:MSDeployPublishMethod=WMSVC /p:MsDeployServiceUrl=%msDeployServiceUrl% /p:AllowUntrustedCertificate=True /p:UserName=%USERNAME% /p:Password=%password% /p:SkipExtraFilesOnServer=True /p:VisualStudioVersion=12.0
IF NOT "%ERRORLEVEL%"=="0" PAUSE
ENDLOCAL
You can Publish the Solution with desired path by below code, Here PublishInDFolder is the name that has the path where we need to publish(we need to create this in below pic)
You can create publish file like this
Add below 2 lines of code in batch file(.bat)
#echo OFF
call "C:\Program Files (x86)\Microsoft Visual Studio\2017\Enterprise\Common7\Tools\VsMSBuildCmd.bat"
MSBuild.exe D:\\Solution\\DataLink.sln /p:DeployOnBuild=true /p:PublishProfile=PublishInDFolder
pause
This my batch file
C:\Windows\Microsoft.NET\Framework\v4.0.30319\MSBuild.exe C:\Projects\testPublish\testPublish.csproj /p:DeployOnBuild=true /property:Configuration=Release
if exist "C:\PublishDirectory" rd /q /s "C:\PublishDirectory"
C:\Windows\Microsoft.NET\Framework\v4.0.30319\aspnet_compiler.exe -v / -p C:\Projects\testPublish\obj\Release\Package\PackageTmp -c C:\PublishDirectory
cd C:\PublishDirectory\bin
del *.xml
del *.pdb
For generating the publish output provide one more parameter.
msbuild example.sln /p:publishprofile=profilename /p:deployonbuild=true /p:configuration=debug/or any
you can use this command to publish web applications with Publish Profiles.
msbuild SolutionName.sln /p:DeployOnBuild=true /p:PublishProfile=PublishProfileName
This sample Publish Profile can create a release zip file with a version number that's in AssemblyInfo.cs File in the network path (create zip file and remove other published files with PowerShell command is optional).
<Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003">
<PropertyGroup>
<WebPublishMethod>FileSystem</WebPublishMethod>
<LastUsedBuildConfiguration>Release</LastUsedBuildConfiguration>
<LastUsedPlatform>Any CPU</LastUsedPlatform>
<SiteUrlToLaunchAfterPublish />
<LaunchSiteAfterPublish>True</LaunchSiteAfterPublish>
<ExcludeApp_Data>False</ExcludeApp_Data>
<Major>0</Major>
<Minor>1</Minor>
<Build>2</Build>
<Publish>C:\</Publish>
<publishUrl>$(Publish)</publishUrl>
<DeleteExistingFiles>True</DeleteExistingFiles>
</PropertyGroup>
<Target Name="GetBuildUrl">
<PropertyGroup> <In>$([System.IO.File]::ReadAllText('$(MSBuildProjectDirectory)\Properties\AssemblyInfo.cs'))</In>
<TargetPath>\\NetworkPath\ProjectName</TargetPath>
<Pattern>^\s*\[assembly: AssemblyVersion\(\D*(\d+)\.(\d+)\.(\d+)\.(\d+)</Pattern>
<Major>$([System.Text.RegularExpressions.Regex]::Match($(In), $(Pattern), System.Text.RegularExpressions.RegexOptions.Multiline).Groups[1].Value)</Major>
<Minor>$([System.Text.RegularExpressions.Regex]::Match($(In), $(Pattern), System.Text.RegularExpressions.RegexOptions.Multiline).Groups[2].Value)</Minor>
<Build>$([System.Text.RegularExpressions.Regex]::Match($(In), $(Pattern), System.Text.RegularExpressions.RegexOptions.Multiline).Groups[3].Value)</Build>
<Sub>$([System.Text.RegularExpressions.Regex]::Match($(In), $(Pattern), System.Text.RegularExpressions.RegexOptions.Multiline).Groups[4].Value)</Sub>
<Publish>$(TargetPath)\$(Major).$(Minor).$(Build).$(Sub)\</Publish>
<publishUrl Condition=" '$(Publish)' != '' ">$(Publish)</publishUrl>
<publishUrl Condition=" '$(Publish)' == '' and '$(LastUsedBuildConfiguration)'!='' ">$(LastUsedBuildConfiguration)</publishUrl>
</PropertyGroup>
</Target>
<Target Name="BeforeBuild" DependsOnTargets="GetBuildUrl">
<Message Importance="High" Text="|" />
<Message Importance="High" Text=" ================================================================================================" />
<Message Importance="High" Text=" BUILD INFO " />
<Message Importance="High" Text=" Version [$(Major).$(Minor).$(Build)] found in [$(MSBuildProjectDirectory)\Properties\AssemblyInfo.cs] " />
<Message Importance="High" Text=" Build will be saved to [$(publishUrl)] " />
<Message Importance="High" Text=" =================================================================================================" />
<Message Importance="High" Text="|" />
</Target>
<Target Name="Zip" BeforeTargets="AfterBuild">
<Exec Command="PowerShell -command Compress-Archive -Path $(Publish) -DestinationPath $(Publish)Release.zip" />
<Exec Command="PowerShell -command Remove-Item -Recurse -Force $(Publish) -Exclude Release.zip" />
</Target>
</Project>