I try to save some values in ini file, it's ok while i save only one value, like:
AAA=BBB
but i found a problem, when i try to save several values like this:
AAA=BBB;CCC
it's ok, if i want to save, but if i want to read this value, i will get only BBB. I found solution of this problem, if value was saved in quotes it will be read normally:
AAA="BBB;CCC"
but, i don't know how to save value in quotes. I use following code, to save values:
configs.setValue("Settings/name", value);
I tried to save with ASCII symbol and with "\"", but it's not work. Save code:
if (!Ui->commonIncludesLineEdit->text().isEmpty()) {
value = Ui->commonIncludesLineEdit->text();
configs.setValue("Settings/CommonIncludes", value);
} else {
if (configs.contains("Settings/CommonIncludes"))
configs.remove("Settings/CommonIncludes");
}
read code:
if (configs.contains("Settings/CommonIncludes"))
Ui->commonIncludesLineEdit->setText(configs.value(
"Settings/CommonIncludes",
"Open problems").toString());
ini file:
[Settings]
CommonIncludes="C:/dev/ObfOr/Workset_latest;C:/dev/ObfOr/Workset_latest/Demo"
Related
Description
I'm trying to create a key binding that behaves differently based on the file type.
Ideally what id like to do is the following:
If the file type is .md then run the command markdown-preview-plus:toggle
else run the command script:run
I know it's something along the lines of:
file init.coffee :
editor.command('custom:command', e => {
if ( of file type .md) {
markdown-preview-plus:toggle
} else {
script:run
}
})
Then in the keymap.cson i have to add something like:
'atom-text-editor':
'cmd-i': 'custom:command'
But obviously this is pseudocode. I've tried reading the documentation specifically this
but there isn't enough information.
I was able to do this by adding the following to the keymap.cson file:
"atom-text-editor[data-grammar='source gfm']":
'cmd-i': 'markdown-preview-plus:toggle'
"atom-text-editor:not([data-grammar='source gfm'])":
'cmd-i': 'script:run'
For anyone trying to do something similar to this, I used this as reference:
Atom grammer syntax
I need to isolate the file extension from a path in SQLite. I've read the post here (SQLite: How to select part of string?), which gets 99% there.
However, the solution:
select distinct replace(column_name, rtrim(column_name, replace(column_name, '.', '' ) ), '') from table_name;
fails if a file has no extension (i.e. no '.' in the filename), for which it should return an empty string. Is there any way to trap this please?
Note the filename in this context is the bit after the final '\'- it shouldn't be searching for'.'s in the full path, as it does at moment too.
I think it should be possible to do it using further nested rtrims and replaces.
Thanks. Yes, you can do it like this:
1) create a scalar function called "extension" in QtScript in SQLiteStudio
2) The code is as follows:
if ( arguments[0].substring(arguments[0].lastIndexOf('\u005C')).lastIndexOf('.') == -1 )
{
return ("");
}
else
{
return arguments[0].substring(arguments[0].lastIndexOf('.'));
}
3) Then, in the SQL query editor you can use
select distinct extension(PATH) from DATA
... to itemise the distinct file extensions from the column called PATH in the table called DATA.
Note that the PATH field must contain a backslash ('\') in this implementation - i.e. it must be a full path.
I have trouble with correctly launching cloc 1.62 from windows command line using qprocess. Here is what i have:
A QStringList with all the languages cloc recognizes;
QStringList languages;
languages<<"\"ABAP\""<<"\"ActionScript\""<<"\"Ada\""<<"\"ADSO/IDSM\""<<"\"AMPLE\""<<"\"Ant\""<<"\"Apex Trigger\"";
Then i create a qstring consisting of all of the list's elements separated by comma, exept for one, which is stored in a lang variable;
QString langsinuse;
for (int i=0;i<languages.length();i++)
{
if (languages.at(i) != lang)
{
if (langsinuse.isEmpty())
{
langsinuse=langsinuse+languages.at(i);
}
else
{
langsinuse=langsinuse+','+languages.at(i);
}
}
}
then i build an arguments stringlist and launch the process:
QStringList arguments;
QProcess cloc;
QString params="cloc-1.62.exe --xml --by-file --report-file="+
list1.at(1).trimmed()+'/'+name+'/'+"report.xml"+" --exclude-lang="+langsinuse+" "+distr;
arguments<<"/k"<<params;
cloc.startDetached("cmd.exe",arguments,"cloc/");
But somehow the spaces in the languages names are not considered escaped and every word separated by space considered a different parameter for cloc, even though both words are in double quotes (for example "\"Apex Trigger\"") and clock produces a bunch of errors.
(50 errors:
Unable to read: Trigger","Arduino
Unable to read: Sketch","ASP","ASP.Net","Assembly","AutoHotkey","awk","Bourne)
It's the error that happens when you don't put a language's name that contains spaces in double quotes, int the --exclude-lang= option (for example --exclude-lang=Apex Trigger will cause an error, --exclude-lang="Apex Trigger" won't)
However if i just save the whole command i build in qt and save it in some batch file it runs just fine.
Am i missing something in escaping the double quotes correctly?
Ok i just had to pass arguments separately and not as a single string.
arguments<<"/k"<<"cloc-1.62.exe" <<"--xml"<<"--by-file"<<"--report-file="+
list1.at(1).trimmed()+'/'+name+'/'+"report.xml"<<"--exclude-lang="+langsinuse<<distr;
I am trying to upload a CSV file that has special characters using ServletFileUpload of apache common. But the special characters present in the CSV are being stored as junk characters in the database. The special characters I have are Trademark, registered etc. Following is the code snippet.
ServletFileUpload upload = new ServletFileUpload();
FileItemIterator iter = upload.getItemIterator(request);
while (iter.hasNext()) {
FileItemStream item = iter.next();
String name = item.getFieldName();
InputStream stream = item.openStream();
if (item.isFormField()) {
System.out.println("Form field " + name + " with value "
+ Streams.asString(stream, "UTF-8") + " detected.");
}
}
I have tried reading it using BufferendReader, used request.setCharacterEncoding("UTF-8"), tried upload.setHeaderEncoding("UTF-8") and also checked with IOUtils.copy() method, but none of them worked.
Please advice how to get rid of this issue and where it needs to be addressed? Is there anything I need to do beyond servlet code?
Thanks
What database are using? What character set is database using? Characters can be malformed in the database rather than in Java code.
Well I'm using the following code to get the filename for a file that needs to be stored ..
QString fileName = QFileDialog::getSaveFileName(this, tr("Save File"),"/home/user/MyDocs/",tr("JPG files (*.jpg);;BMP files (*.bmp);;PNG files (*.png)"));
I'm providing the user with a number of options regarding the file format in which the file is to be saved. However, the returned QString only gives me the prefix filename the user have chosen, not the suffix and thus I don't know which file format the user chose. How can I detect such a file format?
The code in the question works in Windows (Qt 4.6.2 and Win XP). fileName contains the selected extension. But you are obviously using something else Windows, so you could try this workaround:
QFileDialog dialog(this, tr("Save as ..."), "/home/user/MyDocs/");
dialog.setAcceptMode(QFileDialog::AcceptSave);
QStringList filters;
filters << "JPG files (*.jpg)" << "BMP files (*.bmp)" << "PNG files (*.png)";
dialog.setNameFilters(filters);
if (dialog.exec() == QDialog::Accepted)
{
QString selectedFilter = dialog.selectedNameFilter();
QString fileName = dialog.selectedFiles()[0];
}
That is a slighty modified code from here.
You need to use the 5th optional string
I usually do it like this:
#define JPEG_FILES "JPG files (*.jpg)"
#define BMP_FILES "BMP files (*.bmp)"
#define PNG_FILES "PNG files (*.png)"
QString selectedFilter;
QString fileName = QFileDialog::getSaveFileName(this, tr("Save File"),
"/home/user/MyDocs/",
JPEG_FILES ";;" BMP_FILES ";;" PNG_FILES, &selectedFilter);
if (fileName.isNull())
return;
if (selectedFilter == JPEG_FILES) {
...
} else if (selectedFilter == BMP_FILES) {
...
} else if (selectedFilter == PNG_FILES) {
...
} else {
// something strange happened
}
The compiler takes care to concatenate the literal strings in the argument.
I'm not sure how the returned string interacts with tr(). You'll have to test and find out. probably need to un-translate it.
It could have been nicer if the function would return the index of the selected filter but alas, it does not.
A nicer solution would be to put the filters in a list, create a string from it and then compare to the returned selected filter string to the ones in the list. This would also solve the tr() problem.
Have a look to this discussion. It uses QFileInfo on the string that was entered in a QFileDialog.