How is it possible to set the base url?
In the documentation of 3.1 is written: Director::setBaseURL: Use Director.alternate_base_url instead
Is there any example where to put the Director.alternate_base_url?
Thank you
The recommended way to do this is by updating your _config.yml, adding the following lines (remember indentations are 2 spaces):
Director:
alternate_base_url: '/'
a full _config.yml file could look something like
---
Name: mysite
After: 'framework/*','cms/*'
---
SSViewer:
theme: 'customTheme'
Director:
environment_type: 'live'
alternate_base_url: '/'
Put the following string in your project _config.php file
Config::inst()->update( 'Director', 'alternate_base_url', '/' );
Related
I'm trying to add custom domain into the project.
I have regions.locale.yaml file.
I'm trying load it in twig:
{{'united.kingdom'|trans|raw}}
But this doesn't work.
I think it has to be somehow declared that this file exists.
I found this in documentation:
// ...
$translator->addLoader('xlf', new XliffFileLoader());
$translator->addResource('xlf', 'messages.fr.xlf', 'fr_FR');
$translator->addResource('xlf', 'admin.fr.xlf', 'fr_FR', 'admin');
$translator->addResource(
'xlf',
'navigation.fr.xlf',
'fr_FR',
'navigation'
);
But where should I put this to declare my regions.locale.yaml files globally?
Thanks
If you are using Symfony Standard, you don't have to declare your translation files, you just put them in app/Resources/translations.
The key is that when you want to translate using your custom domain, you just specify your domain, like this :
{{'united.kingdom'|trans({}, 'regions')|raw }}
or somewhere else in your code :
$translator->trans('united.kingdom', [], 'regions');
I can't make my translator to load a resource yams file.
I have a file admin.ru.yml inside AppBundle/Resources/config/translations/
I have in my other bundle the following lines
$translator = new Translator('ru_RU', new MessageSelector());
$translator->addLoader('yaml', new FileLoader());
$translator->addResource('yaml', 'admin.ru.yml', 'ru_RU', 'admin');
$tt = $translator->trans('Category', array(), 'admin');
It does not load the yml file.
I even have specified in my app/config.yml file of the whole application
translator:
paths:
- '%kernel.root_dir%/../src/AppBundle/Resources/config/translations'
but with no result. I tried many paths but can't find the right way. Any suggestions of what am I doing wrong?
you have to rename your file #AppBundle.ru.yml, the file path is not necessary
I have defined a route as followed in my routing.yml file :
route_name:
path: "/dashboard#messages/{id}"
However when I ask Symfony to generate that route, I get :
/dashboard%23messages/12345
How can I skip the encoding part of the route generation? Or how can I escape the # char in the path definition?
PS : Working with a (big) legacy system, I cannot change the urls.
Available from Symfony 3.2.
Support for anchors has been announced for the routing component using the fragment variable :
$this->get('router')->generate('user_settings', ['_fragment' => 'password']);
Will generate an url : /user/settings#password
For more information view the announcement.
You cannot easily - route parts are encoded unconditionally:
$url = strtr(rawurlencode($url), $this->decodedChars);
see at https://github.com/symfony/symfony/blob/master/src/Symfony/Component/Routing/Generator/UrlGenerator.php#L192
Technically you might have extended the class UrlGenerator class and swap them using router.options.generator_class parameter. Then you could override the doGenerate method and replace %23 -> #.
In twig
<a href="{{ path('user_settings', { '_fragment': 'password' }) }}">
I know that the basis of Silex approach in which all the application logic in a single file. But my application will be possible to have more than twenty controllers. So I want to have a handy map to manage the router.
My question is to search for solutions in which I would be able to make a router to a separate file. In the best case, the file must be of YAML type:
# config/routing.yml
_home:
pattern: /
defaults: { _controller: MyProject\Controller\MyController::index }
But the native is also a good case (for me):
$routes = new RouteCollection();
$routes->add(
'home',
new Route('/', array('controller' => 'MyProject\Controller\MyController::index')
));
return $routes;
Problem of the second case is that I have to use the match() function for each rule of routing. It is not at all clear.
What are the ways to solve this issue? The condition is that I want to use the existing API Silex or components of Symfony2.
Small note:
I don't use a ControllerProviderInterface for my Controller classes. This is an independent classes.
First of all, the basis of Silex is not that you put everything in one file. The basis of Silex is that you create your own 'framework', your own way of organizing applications.
"Use silex if you are comfortable with making all of your own architecture decisions and full stack Symfony2 if not."
-- Dustin Whittle
Read more about this in this blogpost, created by the creator of Silex.
How to solve your problem
What you basically want is to parse a Yaml file and get the pattern and defaults._controller settings from each route that is parsed.
To parse a Yaml file, you can use the Yaml Component of Symfony2. You get an array back which you can use to add the route to Silex:
// parse the yaml file
$routes = ...;
$app = new Silex\Application();
foreach ($routes as $route) {
$app->match($route['pattern'], $route['defaults']['_controller']);
}
// ...
$app->run();
I thought I'd add my method here as, although others may work, there isn't really a simple solution. Adding FileLocator / YamlFileLoader adds a load of bulk that I don't want in my application just to read / parse a yaml file.
Composer
First, you're going to need to include the relevant files. The symfony YAML component, and a really simple and useful config service provider by someone who actively works on Silex.
"require": {
"symfony/yaml": "~2.3",
"igorw/config-service-provider": "1.2.*"
}
File
Let's say that your routes file looks like this (routes.yml):
config.routes:
dashboard:
pattern: /
defaults: { _controller: 'IndexController::indexAction' }
method: GET
Registration
Individually register each yaml file. The first key in the file is the name it will be available under your $app variable (handled by the pimple service locator).
$this->register(new ConfigServiceProvider(__DIR__."/../config/services.yml"));
$this->register(new ConfigServiceProvider(__DIR__."/../config/routes.yml"));
// any more yaml files you like
Routes
You can get these routes using the following:
$routes = $app['config.routes']; // See the first key in the yaml file for this name
foreach ($routes as $name => $route)
{
$app->match($route['pattern'], $route['defaults']['_controller'])->bind($name)->method(isset($route['method'])?$route['method']:'GET');
}
->bind() allows you to 'name' your urls to be used within twig, for example.
->method() allows you to specify POST | GET. You'll note that I defaulted it to 'GET' with a ternary there if the route doesn't specify a method.
Ok, that's how I solved it.
This method is part of my application and called before run():
# /src/Application.php
...
protected function _initRoutes()
{
$locator = new FileLocator(__DIR__.'/config');
$loader = new YamlFileLoader($locator);
$this['routes'] = $loader->load('routes.yml');
}
Application class is my own and it extends Silex\Application.
Configuration file:
# /src/config/routes.yml
home:
pattern: /
defaults: { _controller: '\MyDemoSite\Controllers\DefaultController::indexAction' }
It works fine for me!
UPD:
I think this is the right option to add collections:
$this['routes']->addCollection($loader->load('routes.yml'));
More flexible.
You could extend the routes service (which is a RouteCollection), and load a YAML file with FileLocator and YamlFileLoader:
use Symfony\Component\Config\FileLocator;
use Symfony\Component\Routing\Loader\YamlFileLoader;
$app->extend('routes', function($routeCollection) {
$locator = new FileLocator([__DIR__ . '/../config']);
$loader = new YamlFileLoader($locator);
$collection = $loader->load('routes.yml');
$routeCollection->addCollection($collection);
return $routeCollection;
});
You will need symfony/config and symfony/yaml dependencies though.
I have a symfony project in which I've been through my twig templates and added {% trans %}...{% endtrans %} or adding translations like {{ title|trans }} where appropriate. I've also added a messages.de.xliff file and that is working perfectly for the few translations I have tried.
Is there a way I can get a list of strings missing from my xliff file? It's quite hard to keep track of every translation as I add it. It seems like it should log a failure to get a translation in a log file somewhere, but I've been googling a while and can't find anything.
Hi Try following May Be helpful.
https://github.com/schmittjoh/JMSTranslationBundle/blob/master/Resources/doc/index.rst
Very powerful tool and definitely takes care of you problem.
This is a very crappy patch to apply in vendor/symfony that does what I need. Probably not to be run on a production server!
diff --git a/src/Symfony/Component/Translation/MessageCatalogue.php b/src/Symfony/Component/Translation/MessageCatalogue.php
index b55676f..98a5cba 100644
--- a/src/Symfony/Component/Translation/MessageCatalogue.php
+++ b/src/Symfony/Component/Translation/MessageCatalogue.php
## -128,6 +128,8 ## class MessageCatalogue implements MessageCatalogueInterface
return $this->fallbackCatalogue->get($id, $domain);
}
+ error_log('Translation not found: "' . $id . '"');
+
return $id;
}
My solution was to overwrite the Translator and MessageCatalogue classes.
Translator:
class RegisteringTranslator extends \Symfony\Component\Translation\Translator
{
protected function loadCatalogue($locale)
{
parent::loadCatalogue($locale);
if ( ! $this->catalogues[$locale] instanceof RegisteringMessageCatalogue) {
$registeringCatalogue = new RegisteringMessageCatalogue($locale);
$registeringCatalogue->addCatalogue($this->catalogues[$locale]);
$this->catalogues[$locale] = $registeringCatalogue;
}
}
}
Catalogue:
class RegisteringMessageCatalogue extends \Symfony\Component\Translation\MessageCatalogue
{
public function get($id, $domain = 'messages')
{
if ( ! $this->has($id, $domain)) {
error_log('Translation not found: "' . $id . '"');
}
return parent::get($id, $domain);
}
}
Of course you need to use the new Translator class.
Also not very nice because it uses the protected methods and properties of Translator class. But better than changing the Symfony code directly.
I know this is an old question, but I'm posting here just in case somebody still has the same problem.
Starting from Symfony 2.6, you'll find a very nice addition to the web debug toolbar that shows how many translations you're missing.
By clicking it, the profiler will display a detailed list of missing translation.
Works out of the box, without any configuration.
Normally you should be able to use the Symfony command debug:translation via app/console.
Something like this:
$ php app/console debug:translation --only-missing <locale> <Bundle Name>
A concrete example would be:
$ php app/console debug:translation --only-missing nl AppBundle
That would output:
----------- ---------- ------------------------------------------------------------------------------------------------------- ------------------------------------------
State Domain Id Message Preview (nl)
----------- ---------- ------------------------------------------------------------------------------------------------------- ------------------------------------------
missing messages Create a clean selection Create a clean selection
missing messages New Selection New Selection
missing messages login.labels.geoserver_url login.labels.geoserver_url