drupal 7 internationalisation il8n load node - drupal

I'm a part-time developer (ranked Enthusiastic Amateur) and am trying to develop my first multilingual site in Drupal 7 using the Internationlisation (il8n) suite.
After following the initial setup directions, I'm now trying to implement a "featured article" column where Articles flagged as Featured appear in a list in the right-hand column of the page.
Ordinarily I'd simply do a "db_query" to return a list of node ids and then do a node_load() for each result.
However, how do I do this using il8n to ensure that I'm pulling out the correct language versions of the Articles?
Any and all help is greatly appreciated,
~Matt Bridger

Use the i18n_node_get_lang() function to check the language of the nodes and load only the ones with the right language.

Typically you would use Views module (http://drupal.org/project/views). To create a block listing the nodes you want, and then under Filter Language, use Content: Language set to Current User's Language to filter for only the language being viewed. With this solution, there is no need to write any code, unless you need some advanced theming for your list.

Related

Drupal List View for data entry to multiple records

I would like to create a data entry form in Drupal 7 that is similar to Filemaker's List View. List View is a view that contains many records on a page. When Submit button is clicked, data entered in the fields will be assigned to the individual records.
For example, I have a list of students' names and a column field of grade type. The student's name will be created from Drupal View's filtering, but the grade field will be empty waiting for me to key in.
What is the proper Drupal's module that can enable this functionality? Or what can I do to create this functionality.
This approach is closer to your original request, im testing this out now and I think it should more than do the trick, much more interestingly too.
http://drupal.org/project/slickgrid
Edit:
I highly recommend trying this its awesome!!
A couple quick tips
Be sure to also install http://drupal.org/project/title so you can reset the title (make it a field), Basically with this editor you can only edit actual fields, so same goes for location module, you'll need to use the field option rather than node option.
One possible downer, at least for my site, it appears the drupal module does not support jquery 1.7 which my site uses, so a few buttons etc don't work as expected, also the drupal module does not support the latest slickgrid release either. I'd like to look into fixing that but I dont have the time just yet, possibly someone will before long. If jquery 1.7 is not required for your site then none of that will be a problem for you.
I just figured how to do something similar, although I went about it a different way then I think would be the most desirable, at any rate what I did works perfectly for me at the moment.
What I did...
Used a google docs spreadsheet for data entry, exported a CSV file, then used Feeds module to Import and Map it to my desired content type. I was even able to get location, taxonomy & image fields to map.
Modules & Stuff Used...
Feeds http://drupal.org/project/feeds which also includes Feeds
Importer, you'll want to read through all the instructions to be sure
you understand the import methodology, I could never explain it all
here!
Feeds Tamper http://drupal.org/project/feeds_tamper , I used this to
explode the cell which had a | separated | list of taxonomy terms (dont use comma), the
nice side effect is if the term doesn't exist it creates it for you!
Spreadsheet - Personally I created a Google Docs Spreadsheet, any type
will do. This spreadsheet has every field you want to map to fields
in your content type.
"More Better"
Currently I am on the hunt for a simple backend UI way to do this, but this is what I've settled on for now. I just couldn't imagine hand entering hundreds of nodes, page submit after page submit! I will post back if I figure another way to do it. Good luck!
I have just started with
https://www.drupal.org/project/editableviews
which enables the creation of views where all the fields are editable, including when no data exists in the related entity. At the first url is also documentation.
There a screencast which shows more
https://www.youtube.com/watch?v=g_D4z4Bw6iw

Field data in one table, not many. for drupal7

I am working with the commerce module to create an online store. I am modifying the products .install file to create a content type (as I have been told this is required) and as part of that content type, I need to create lots of fields. The list will be around 50-60 different pieces of information.
Ideally I would like to store these in a single table with the productID at the beginning and all the other information along, but this doesn't seem to be the case; all the fields are stored in different tables.
I noticed that the "Address" module that is also used with commerce creates a field-type that has about 15 different values all stored in the same box. How is this possible? I noticed that if I set the cardinality up to 5 for example, it creates different rows. I just want a table with the following:
ID - value1 - value2 - value3 etc etc.
I also don't need any modules/extensions as this all needs to be written in the files. I also don't think that changing to the mongoDB ( I think ) is an option, so what are my options in this situation?
That's not how the Drupal field system works I'm afraid, one field == one table (well actually 2 tables if you include the revision table for each field).
The Address module uses hook_field_schema() to define several columns for that particular field (have a look in address.install and you'll see what I mean).
So if you want to put everything in one table you'll simply have to define your own field type (see the examples module, specifically field_example for help with that).
Bear in mind though that the number of columns you define in hook_field_schema() will be static once the module is installed, and the only way you're going to be able to increase/decrease it is with an _update hook for your custom module.
Also, if you're hacking at files that are included in the Commerce module...stop!: Commerce is still very much in it's infancy and you will likely have to update it soon...once you've done that your code changes will be gone and there's a good chance your site will be in an inconsistent state.
The whole point to Drupal is that everything is hooked/farmed out so that it can be altered by other parts of the system. There's nothing you can change in product.install that can't be done by implementing a Drupal hook in another module.
If you're unsure, post another question detailing what you're trying to accomplish by directly editing a contrib module file and one of the Drupal gurus on SO will point you in the right direction :-)
EDIT
Just to say I've been working with Ubercart in Drupal 7 for quite some time now and find it a very, very good solution (a lot of Commerce contributed modules are still in dev/alpha/beta; this is less so for Ubercart contributed modules). It might be worth a look.
Some more info
I think you've basically got two options here but either way you'll need to create a custom module (excellent set of instructions here).
Option 1: Create a custom field
If you're a Drupal coding beginner I'd suggest this is probably the easiest way to accomplish what you want, but it's still not totally straight forward. Grab the field_example module from the Drupal Examples module link above and have a look in the .install file, specifically the field_example_field_schema() function. That defines the columns that will be in the table for that field. Then have a look in field_example.module...pretty much every function that's commented with Implements hook_x is one that you're going to want to copy into your module and tweak for your own needs.
I think this will be easier because Drupal will handle the table/form field creation for you
so you don't have to mess with the database, schema or form APIs.
Option 2: Create a custom module
This option involves implementing your own table (like you suggest in your comment) where the primary key would be the entity ID of the product and would also contain all of your custom columns. (See the Schema API documentation for help with this).
Then you'd implement hook_form_alter() to add the form fields necessary for a user to input the data, and then implement hook_node_insert() and hook_node_update() to persist this data to your database table. It's quite hard to go into any more detail without actually writing code and it's quite a bit of code!
Hope that helps, sorry I can't be any more specific but it's not easy without knowing all the ins and outs of the situation

How to index & search hierarchical nodes with solr + drupal + cck

My Drupal 6 site uses 3 custom node types that are hierarchically organized: page, book, library. I want to use Solr to index and search the content.
I want the search to return only Book nodes in the results.
But I want the search to use the contents of children (pages) and parents (libraries) when performing the search.
Can Solr be configured to index & search in this way?
Thanks!
You are going to have a couple of issues with this:
Solr isn't hierarchical by nature, it's denormalized so indexing a heirarchy is hard.
You're going to have to figure out how to boost various terms/fields based on where in the hierarchy they are (is the library more important than the book, so to speak).
Drupal has a specific configuration related to nodes and modifying that, by default, wouldn't be the easiest.
The Solr implementation is tightly tied to the database, so modifying the configuration would probably take a lot of effort on your part.
I would recommend you don't try to implement this, but if you did you could look at the Apache Solr Attachments module. You would have to do something similar... basically:
hook_modify_query to modify the actual indexing of the node
custom theme your search results to display this hierarchy
Or you could create a single giant field with a bunch of searchable text and use that as part of your searches.

How to filter custom content type nodes using ajax in Drupal?

I'm in a situation where I think I need to create my own custom search module. What I'm trying to do is make a page with a list of all my nodes in the node type - let's call it 'Beer'. So I want to be able to filter through the beers in a fashion similar to the one you find on the Apple Trailers page ( http://trailers.apple.com/ ).
I tried using Views 2 but ran it to a few problems:
I can't make the filter links like in the top of the trailers page (exclusive, just HD etc.)
The search function will only search one field (Exposed field "Beer title" but I also want it to search for manufacturer and other things.
I'm aware of a couple of solutions:
I could fix the last problem by using the Computed Field Module where I could combine the fields I want to search through. I just don't see this as a very elegant solution.
I could make my own module and create my own database queries where I apply the relevant filters (I just don't know how).
I could somehow use my already installed Solr module.
So the first solution - the easiest I guess but also kind of bad with duplicate content in my database.
The second solution - the best (maybe) - problem: I'm too dumb.
The third solution - Solr seems pretty cool but would I be able to present my beer nodes with just the title and a picture?
So I guess my question is. Which one of the three would you use? Or what other solutions could I potentially use (I'm confident there are things I haven't thought of :))?
Sounds like this could be a good use for Taxonomy not different node types. Also, Have you considered http://drupal.org/project/quicktabs ?
You could set up each "filter" as a tab that passes an argument down to a view. Then don't expose any views filters to the user.

Taxonomy terms are not translated in an exposed filters block

in my view's exposed filters block the taxonomy terms are showed only in the original language version (in English).
Vocabulary is set to Localize terms.
The terms are translated via Translation Table.
All the other content (Views, nodes, translated strings etc.) is showed correctly (in German).
I'd expect them to appear in current language, however.
Here for instance, I'd expect to have German Sommer 10 instead of English Summer 10.
Do You have any idea how to solve it?
I use Drupal 6 and Views 2.10
I have found a patch to make taxonomy terms appear translated.
Unfortunately, it seems that the it's not a bug but just a not (yet) implemented feature (see this and that).
(...) The reason that there is a difference in node behavior is that the module you're using for taxonomy translation modifies the node. It would have to modify the view as well. Drupal core doesn't support translating vocabulary. I am happy to (...) make sure it has the capability to help with Views translation, but you must understand that this is:
1) not automatic
2) not views' responsibility.

Resources