I installed on my server, a Bug tracker which is accessible through port 3000 (http://myserver:3000).
Every thing is ok on my server, i can access to my web application any time, but in my job's computer, i cannot even connect to this application and no other web application which run on different port other than 80.
I have added a role on the windows Firewall settings by letting connection to and from port 3000. But same result.
If some one have a solution to this, i'll be thankful.
Best Regards
Is it possible that your work network is blocking your home machine. Can you ping your home machine or access it with its ip address? When you type
http://myserver:3000
are you doing this from the local intranet? If you have your bug server on your home machine then you won't be able to access
http://myserver:3000
from your work machine without a fully qualified domain nae or ip address?
If the above answers are all resolved then whenever I have such difficulties on windows, I do the following. If you don't have admin rights you might not be able to do this.
temporarily disable all firewall/antivirus programs.
Start web server listening on port 80 (on your home machine)
Access from a different machine if this works then
Start web server on 3000
Access from a different machine.
If it works then it is a matter of finding whether the problem was that the web request was being blocked by the firewall or antivirus. In your case it appears it might be the antivirus. To confirm disable all antivirus for a moment.
Make sure you turn your antivirus/firewall back on once the problem is diagnosed!
Related
I'm not sure I can adequately explain my dilemma, but here goes...
Our company has its own web server at xyz.com. I have a Win 7 Pro machine running a non-HTTP server program that communicates with an iPhone app used by our field crews. The path to this machine from outside the network is abc.xyz.com, and it's set for port 5000. The app, then, is programmed to exchange data (ASCII only) with the server at abc.xyz.com:5000. The server program is written in VB, and the system works very well like that.
What I would like to do now is to add IIS to this same machine and open it on port 5001, so I can run asp.net pages that will enhance the functionality of the app for our crews. The URL would be abc.xyz.com:5001, and they will access it through their phone browsers.
I have IIS 7.5 installed on the machine, and I have started it running with the "default web site," and I have the binding set for port 5001. So far I am able to access the IIS "Welcome" page only from the same machine. I can't get it to come up on any other machine either inside or outside the network.
In searching for clues for this problem, all I read indicates that it's pretty much a snap to get a web server running on your Windows 7 machine. But it hasn't been so much a snap for me. I've checked the sharing settings and the security settings, they seem to be ok, as best I can tell.
I am hoping that someone will help me identify some obscure setting somewhere that I am overlooking and get this going. But I also even wonder if this is something that can't be done, i.e. because there's another server program using the same path running on port 5000.
By the way, I am not the network administrator. I try to avoid getting him involved because he's difficult to work with. I am hoping that this is just between me and my server.
Thanks for any insight anyone can give me.
You mention that you can access the website from the machine itself on port 5001, but you can't access the site from another computer within the same network - this suggests to me that the Windows 7 built-in firewall is blocking the request - as it's a non-standard IIS port.
You should configure the firewall to allow incoming requests on port 5001. Open a command prompt (as administrator) and run the following:
netsh advfirewall firewall add rule name='IIS Website on Port 5001' dir=in protocol=TCP localport=5001 action=allow profile=any
I found the answer elsewhere on StackOverflow. I needed to add IUSR to the list of authorized users. So far I have tested it on my iPhone browser using 3G and it came through. Seems likely that it will work from anywhere, but I'm not yet ready to declare total success.
I'm running a ASP.NET on my pc and I would like to access to that app from another pc on the same network. I've tried to reach the app writing the URI of my pc on the network followed by the port number as below:
"192.168.X.X:49223/"
But it shows me an 400 error saying that it's an invalid hostname...
Is there something to do with my windows firewall or in IIS to allow access from another PC ?
Thanks for your help.
You may need to an exception in Windows Firewall.
Control Panel > Windows Firewall > Advanced Settings > Inbound/Outbound rules.
Add a new rule to both, specifying your port number and a generic name to identify its purpose.
Install IIS server on your machine, then deploy your application on that IIS server.
Refer this for Deployment assistance
To run the application on IIS instead of ASP.Net dev server you need to
Right click on solution in VS
Click on Start Options..
In Server section, Select "Use Custom Server" and then provide the URL of the application you have added earlier on IIS
Then you can easily access your website from any other machine on the same network.
Is it hosted in iis, or are you running it through Visual Studio. The funny port number (49223) tells me it's the latter.
When you run a VS project, the dev server is designd to only allow local conconnections. If you connect from a network it gets blocked by design. Their is no config around it.
What I do as a hack is run a reverse proxy like Nginx. It's a free download. Run it on your dev machine. You can tell it to listen on a port (eg 88) and then redirect tge traffic to port 49223. Give your mate the same url as before but replace the port with 88
Nb make sure your port 88 is open as per codemans answer
An example of the nginx config would be https://gist.github.com/ekinertac/5524389
This then tricks VS into thinking it came from your local machine.
I am unable to connect, for example, via http to a brand new installation of 64-bit Windows Server 2008. The server is on a domain, but is not DC (that's another problem altogether).
The IIS7 is running on the server and the website is accessible locally via http://localhost, but when I try to connect from another machine on the same network, the connections is refused, even though Windows Firewall is disabled.
I am able to connect to and browse the shared folders on the server using Windows Explorer, so it is not a physical connection issue. I can ping other machines on the network from the server, but trying to ping the server from another machine results in "Destination host unreachable".
As far as I can tell, the server refuses any TCP connections from any machine. I am thinking, there must be some other configuration setting that I am missing... Please, help.
NS
Like in Windows 7 the behaviour is determined by the network type (home, work, internet) the OS thinks it is connected to... even with a disabled firewall it respects these settings and accordingly refuses/allows connections...
The solution is embarrassignly simple, and the credit goes to Ashley Steel, on ServerFault.com for asking just the right questions. It turns out that the DNS was resolving the name of the server incorrectly, because the machine was named the same as an old, since decommissioned workstation that used to live on the same subnet.
The solution: rename the server.
NS[Now hiding under a rock]
I have application..its runnning on my localhost.. i need one more machine to access that application.. but when in tht link i type my IP address instead of localhost.. it showing cannot find server.. can you plz tell me steps what i need to do in orderr to access appplication to other machine.. as such there is no UAT server as of now...
First off, make sure your firewall allows access through port 80.
Then, check if your IIS allows access from outside IP's.
I can help more if you provide this:
Your OS (XP, Windows 7, etc)
the local link to your app. Is there a port number needed to access the app?
LaterEdit: Ok, then you need to do this:
Now, your app will be served by IIS on port 80 (default). Check your firewall to allow traffic through this port.
If you IIS is set for another port, then use that one.
Checking the port in IIS:
I'm going to assume that you are running the application from Visual studio which allows the localhost to run.
In order for your application to be available to other machines on the network, you have to ensure that IIS is installed on your development machine and then a website is set up for that application as well.
The application existing in IIS is what will make it accessible across your network.
I have Deployed my Asp.net web application on IIS 7.0 on localMachine(Server) and it is working fine there.
But when i try to access it from other machine in LAN, It gives me error that, 'Internet Explorer Can Not find this Page.'
I am accessing it on terminals using server name address and also tried using IP address.
Even I have Shared the Application Folder in network.
Check the Windows Firewall on your Vista PC. You need to let TCP port 80 through.
Make sure that you enable the firewall and bind to IP addresses other than localhost.
You don't need to and should not share the application folder.
This is a security risk as people on the network will be able to access the source code of the application. Also, it won't help with the problems you're having because a network share is not accessed over HTTP and so will never hit IIS and your web application. So you can turn off sharing for the folder and be safe in the knowledge that this isn't the issue.
Next, check your windows firewall and make sure incomming web trafic is allowed ("http" or "port 80").
Next I would have a look at the host headers that the site is running on.
Then maybe update your question with more detail.
Greg
You may also want to ensure that IIS is listening on the correct IP Address. This problem can occur if you switch from a LAN connection to a wireless connection (for example when taking a work laptop home).
To Check this, open inetmgr and right-click on the 'Default Web Site' node. Verify that the IP Address entry is set to the current IP of your machine.