in my app I'm taking into account the clicks made on a botton . The number of clicks is displayed in a label and I used this code ... I wish that the number of clicks started not from 0 but from 12 and stop automatically at 30.
How can I give these blocks in my action where I draw the NSInterger ?
Thank you all for the help
# interface FFDettagliEsami () {
NSInteger FFVariabileNumerica_CFU_Votazione ;
}
# end
# implementation FFDettagliEsami
- ( IBAction ) FFAddVotazione : (id ) sender {
FFVariabileNumerica_CFU_Votazione + + ;
[ FFVotazioneLabel setText : [ NSString stringWithFormat : # " % d", FFVariabileNumerica_CFU_Votazione ]] ;
}
You can initialize FFVariabileNumerica_CFU_Votazione to whichever value you want in places like viewDidLoad: or initWith... if it's a view controller.
And for stopping at 30, just add a check :
- (IBAction)FFAddVotazione:(id)sender {
if (FFVariabileNumerica_CFU_Votazione >= 30)
return;
FFVariabileNumerica_CFU_Votazione++ ;
[FFVotazioneLabel setText:[NSString stringWithFormat:#"%d", FFVariabileNumerica_CFU_Votazione]];
}
use
static NSInteger FFVariabileNumerica_CFU_Votazione = 12;
and in - ( IBAction ) FFAddVotazione : (id ) sender
add the condition to check for FFVariabileNumerica_CFU_Votazione < 30
if(FFVariabileNumerica_CFU_Votazione < 30){
FFVariabileNumerica_CFU_Votazione++;
}
Related
I'm writing to the general journal in x++. I am able to post there currently but the dimensions on the line item are not showing up. The code runs just will have 701100- - - - - and the rest not populated on the line item. i'm not sure why... I've tried several different things... such as below.
ledgerDimensions = ["701100","701100", "MIDWHS", "ACCT", "000001", "AIR", "019-000100"];
journalTrans.parmLedgerDimension(AxdDimensionUtil::getLedgerAccountId(ledgerDimensions));
offsetDimensions = ["701100","701100", "MIDWHS", "ACCT", "000001", "AIR", "019-000100"];
journalTrans.parmOffsetLedgerDimension(AxdDimensionUtil::getLedgerAccountId(offsetDimensions));
journaltrans.save()
and also have tried
// dimensionAttribute = DimensionAttribute::findByName("Location");
// dimensionAttributeValue = //DimensionAttributeValue::findByDimensionAttributeAndValue(dimensionAttribute, "MINOT");
// dimStorage = DimensionAttributeValueSetStorage::find(0);
// dimStorage.addItem(dimensionAttributeValue);
// journalTrans.parmOffsetDefaultDimension(dimStorage.save());
//journalTrans.save()
both are just adding the account number and nothing else.. don't know why!
I used the service for our import interface for general journal.
Below my code, try it this way, it's easy to create the dimensions with this service.
I copied the code from our system and commented it, if you need any further explaination, ask me.
Declarations:
LedgerGeneralJournal ledgerGeneralJournal;
LedgerGeneralJournalService ledgerGeneralJournalService;
AfStronglyTypedDataContainerList journalHeaderCollection;
LedgerGeneralJournal_LedgerJournalTable journalHeader;
AfStronglyTypedDataContainerList journalLineCollection;
AifEntityKeyList journalHeaderCollectionKeyList;
int journalLineCounter; // to create more than one line
int entityKeyCount;
int journalHeaderCounter; // to create more than one journal header if needed
Add parm methods for your counter variables if needed:
public int parmJournalLineCounter(int _journalLineCounter = journalLineCounter)
{
journalLineCounter = _journalLineCounter;
return journalLineCounter;
}
public int parmJournalHeaderCounter(int _journalHeaderCounter = journalHeaderCounter)
{
journalHeaderCounter = _journalHeaderCounter;
return journalHeaderCounter;
}
initializations:
Header
ledgerGeneralJournalService = LedgerGeneralJournalService::construct();
ledgerGeneralJournal = new LedgerGeneralJournal();
journalHeaderCollection = ledgerGeneralJournal.createLedgerJournalTable();
this.parmJournalLineCounter(0); // note to add a parm method for your counter variables
this.parmJournalHeaderCounter(_newInstance ? 1 : this.parmJournalHeaderCounter() + 1); // i added a parameter if more headers are needed
journalHeader = journalHeaderCollection.insertNew(this.parmJournalHeaderCounter());
journalHeader.parmJournalName(contract.parmJournalNameId()); // init your own journal ID
Here my method to create the lines with dimensions.
Note that i only use CostCenter here, if you need more, add them as done with CostCenter (i commented the lines)
protected void writeLine(
str _oldCompany,
TransDate _transDate,
Voucher _voucher,
str _mainAccountNum,
AmountMST _amount,
LedgerJournalTransTxt _transTxt,
CurrencyCode _currencyCode,
str _offsetAccountNum,
str costCenter
)
{
LedgerGeneralJournal_LedgerJournalTrans journalLine;
AifMultiTypeAccount journalLineLedgerDimensionMain;
AifDimensionAttributeValue journalLineDim1Main;
AfStronglyTypedDataContainerList journalLineDimensionCollectionMain;
AifMultiTypeAccount journalLineLedgerDimensionOffset;
str lineMainAccount;
str lineFullAccount;
str lineMainDimensionName = 'CostCenter';
str lineMainDimensionValue;
str lineOffsetAccount;
str lineOffsetFullAccount;
this.parmJournalLineCounter(this.parmJournalLineCounter()+1);
journalLine = this.parmJournalLineCollection().insertNew(this.parmJournalLineCounter());
journalLine.parmLineNum(this.parmJournalLineCounter());
journalLine.parmCompany(CompanyInfo::findByPTROldCompany(_oldCompany).company());
journalLine.parmOffsetCompany(journalLine.parmCompany());
journalLine.parmTransDate(_transDate);
journalLine.parmVoucher(_voucher);
journalLine.parmAccountType(LedgerJournalACType::Ledger);
lineMainAccount = _mainAccountNum;
journalLine.parmAmountCurCredit(_amount > 0 ? 0 : _amount);
journalLine.parmAmountCurDebit(_amount > 0 ? _amount : 0);
journalLine.parmTxt(_transTxt);
journalLine.parmCurrencyCode(_currencyCode);
journalLine.parmOffsetAccountType(LedgerJournalACType::Ledger);
lineOffsetAccount = _offsetAccountNum;
// Create Main Account Dimensions
journalLineLedgerDimensionMain = journalLine.createLedgerDimension();
journalLineLedgerDimensionMain.parmAccount(lineMainAccount);
lineFullAccount = strFmt("%1-%2-", lineMainAccount, costCenter ? lineMainDimensionValue : ''); // if you need more dimensions, add them here first
journalLineLedgerDimensionMain.parmDisplayValue(lineFullAccount);
// and then add the values here like costcenter:
if (costCenter)
{
lineMainDimensionValue = costCenter;
journalLineDimensionCollectionMain = journalLineLedgerDimensionMain.createValues();
journalLineDim1Main = new AifDimensionAttributeValue();
journalLineDim1Main.parmName(lineMainDimensionName);
journalLineDim1Main.parmValue(lineMainDimensionValue);
journalLineDimensionCollectionMain.add(journalLineDim1Main);
journalLineLedgerDimensionMain.parmValues(journalLineDimensionCollectionMain);
}
journalLine.parmLedgerDimension(journalLineLedgerDimensionMain);
// Create Offset Account Dimensions
// same procedure with offset dimensions if needed
if (_offsetAccountNum)
{
journalLineLedgerDimensionOffset = journalLine.createOffsetLedgerDimension();
journalLineLedgerDimensionOffset.parmAccount(lineOffsetAccount);
lineOffsetFullAccount = strFmt("%1--", lineOffsetAccount);
journalLineLedgerDimensionOffset.parmDisplayValue(lineOffsetFullAccount);
journalLine.parmOffsetLedgerDimension(journalLineLedgerDimensionOffset);
}
}
// Create Lines
journalLineCollection = journalHeader.createLedgerJournalTrans();
Finally to write the journal:
public void finalizeLedgerJournal()
{
int keyCount;
List journalIdList;
journalHeader.parmLedgerJournalTrans(journalLineCollection);
ledgerGeneralJournal.parmLedgerJournalTable(journalHeaderCollection);
journalHeaderCollectionKeyList = LedgerGeneralJournalService.create(ledgerGeneralJournal);
// if you need the journalId for further processing:
this.parmEntityKeyCount(journalHeaderCollectionKeyList.getEntityKeyCount());
if (entityKeyCount > 0)
{
for (keyCount = 1;keyCount <= entityKeyCount;keyCount++)
{
if (!contract.parmJournalIdList())
{
contract.parmJournalIdList(new List(Types::String));
}
journalIdList = contract.parmJournalIdList();
journalIdList.addEnd(LedgerJournalTable::findByRecId(journalHeaderCollectionKeyList.getEntityKey(keyCount).parmRecId()).JournalNum);
contract.parmJournalId(LedgerJournalTable::findByRecId(journalHeaderCollectionKeyList.getEntityKey(keyCount).parmRecId()).JournalNum);
}
}
}
I am trying to create a custom reduce function for a dataset attribute group that would sum a number of unique values for another attribute.
For example, my dataset looks like a list of actions on projects by team members:
{ project:"Website Hosting", teamMember:"Sam", action:"email" },
{ project:"Website Hosting", teamMember:"Sam", action:"phoneCall" },
{ project:"Budjet", teamMember:"Joe", action:"email" },
{ project:"Website Design", teamMember:"Joe", action:"design" },
{ project:"Budget", teamMember:"Sam", action:"email" }
So, team members work on a variable number of projects by performing one action per line. I have a dimension by team member, and would like to reduce it by the number of projects (uniques).
I tried the below (storing project in a uniques array) without success (sorry, this might hurt your eyes):
var teamMemberDimension = dataset.dimension(function(d) {
return d.teamMember;
});
var teamMemberDimensionGroup = teamMemberDimension.group().reduce(
// add
function(p,v) {
if( p.projects.indexOf(v.project) == -1 ) {
p.projects.push(v.project);
p.projectsCount += 1;
}
return p;
},
// remove
function(p,v) {
if( p.projects.indexOf(v.projects) != -1 ) {
p.projects.splice(p.projects.indexOf(v.projects), 1);
p.projectsCount -= 1;
}
return p;
},
// init
function(p,v) {
return { projects:[], projectsCount:0 }
}
);
Thanks a lot!
Edit after DJ Martin's answer ::
So, to be clearer, I would like to get the numbers I am after here would be:
-----------
Sam : 2 (projects he is workin on, no matter the number of actions)
Joe : 2 (projects he is workin on, no matter the number of actions)
-----------
The answer provided by DJ Martin gets me there. But rather than hard coding a table, I would like to find a way to use these numbers for my DC.JS bar chart. When I was only using the number of actions (so just a reduceCount() ), I did it like below:
teamMemberChart.width(270)
.height(220)
.margins({top: 5, left: 10, right: 10, bottom: 20})
.dimension(teamMemberDimension)
.group(teamMemberDimensionGroup)
.colors(d3.scale.category20())
.elasticX(true)
.xAxis().ticks(4);
I guess there might be something to change in the group().
UPDATED ANSWER
Sorry I misunderstood the question... you are actually on the right track. You'll just need to maintain a count of each project so that your subtract function can know when to remove the value.
teamMemberGroup = teamMemberDimension.group().reduce(
function (p, d) {
if( d.project in p.projects)
p.projects[d.project]++;
else p.projects[d.project] = 1;
return p;
},
function (p, d) {
p.projects[d.project]--;
if(p.projects[d.project] === 0)
delete p.projects[d.project];
return p;
},
function () {
return {projects: {}};
});
Here is an updated fiddle: http://jsfiddle.net/djmartin_umich/3LyhL/
I have a column that needs to check a field of the object, when the field equals 2 then another has to multiply with -1.
The problem is I do not know the syntax to do this inside the creation of my gridview. Could someone give an example how this works?
#(invoice.dc.Equals(2)?String.Format("{0:0.00}", invoice.totv * -1): String.Format("{0:0.00}", invoice.totv))
This code sample i have to accomplish inside the creation of the gridview. So if field: dc equals 2 show invoice.totv * -1 else show invoice.totv.
This is what i have tried:
grid.Column("", "PDF", format:
(item) => if(#item.dc == 2)
{
String.Format("{0:0.00}", #item.totv * -1) ;
}
else
{
String.Format("{0:0.00}", #item.totv) ;
})
How about
grid.Column("", "PDF", (item) => String.Format("{0:0.00}", item.dc == 2 ? item.totv * -1 : item.totv));
I would like a way to obtain an HTML element or CSS selector (or a reference to the droppable object itself) for the date on which an external draggable element was dropped. I tried using the following within the drop() callback to get the node for the date box using the coordinates of the drop event:
var pageX = jsEvent.originalEvent.pageX;
var pageY = jsEvent.originalEvent.pageY;
var domElem = document.elementFromPoint(pageX, pageY);
var node = Y.one(domElem).ancestor('#calendar > .fc-content table.fc-border-separate tr > td', true);
(I'm using the YUI 3 Y.one() and ancestor() methods above to get the node I want, but other methods could be used.)
The above does correctly locate the node of the date box as long as the drop does NOT land on top of an event cell rendered on that date. If the drop does happen to land on an event cell, however, domElem ends up being the event cell, which is an absolutely positioned element outside of the calendar, and the ancestor() methodology above does not work.
I have also tried getting a reference to the droppable obj by way of the draggable element revert property:
revert: function(droppableObj) {
if(droppableObj === false) {
alert('No droppableObj');
return true;
}
else {
alert(Y.dump({droppableObj: droppableObj}));
return false;
}
},
Unfortunately, the above does not work. Even though the external element does drop correctly, the revert function does not recognize the calendar as droppable. (For details, see my earlier stackoverflow post at: Fullcalendar: draggable object rejects fullcalendar as droppable even though fullcalendar accepts drop )
The only alternative I can think of is to use the date object in the drop() callback, and with that find the correct fc-dayXX element, but that seems pretty cumbersome. I have searched on this already, but not found anything so far. If anyone has a suggestion, please let me know.
Here is what I came up with for the fullcalendar drop callback:
function getSelectorForDroppedOnDate(date, allDay, jsEvent, ui) {
if (! date) return;
var displayedDate = $('#calendar').fullCalendar('getDate');
var displayedMonth = displayedDate.getMonth(); // 0 - 11
var displayedYear = displayedDate.getFullYear();
var droppedOnYear = date.getFullYear();
var droppedOnMonth = date.getMonth(); // 0 - 11
var droppedOnDate = date.getDate(); // 1 - 31
var droppedOnDayOfWeek = date.getDay(); // 0 - 6 no matter what week of the month
// Get values related to the last day of the month before the month the event was dropped on
// so that the grid location of the drop can be determined
var lastDayOfMonthBeforeDroppedOnMonth = new Date(droppedOnYear, droppedOnMonth, 0); // This is actually correct
var dateOfLastDayOfMonthBeforeDroppedOnMonth = lastDayOfMonthBeforeDroppedOnMonth.getDate(); // 1 - 31
var dayOfWeekOfLastDayOfMonthBeforeDroppedOnMonth = lastDayOfMonthBeforeDroppedOnMonth.getDay(); // 0 - 6
var i;
var gridLocationOfDrop; // 0 - 41 to cover 42 days of six weeks always shown
if (droppedOnMonth === displayedMonth) { // dropped on month is same as currently displayed month
i = 0;
// adjust droppedOnDayOfWeek by 1 to account for 0-based index
while ((droppedOnDayOfWeek + 1) + i*7 < droppedOnDate) {
i++;
}
gridLocationOfDrop = droppedOnDayOfWeek + i*7;
}
else {
// if dropped on date is in month previous to currently displayed month (need to compare years since inequality will reverse at year boundary)
if ((droppedOnMonth < displayedMonth && droppedOnYear === displayedYear) || (droppedOnMonth > displayedMonth && droppedOnYear < displayedYear)) {
gridLocationOfDrop = droppedOnDayOfWeek;
}
// else if dropped on date is in month after currently displayed month (need to compare years since inequality will reverse at year boundary)
else if ((droppedOnMonth > displayedMonth && droppedOnYear === displayedYear) || (droppedOnMonth < displayedMonth && droppedOnYear > displayedYear)) {
i = 0;
// adjust dayOfWeekOfLastDayOfMonthBeforeDroppedOnMonth by 1 to account for 0-based index
while ((dayOfWeekOfLastDayOfMonthBeforeDroppedOnMonth + 1) + i*7 < dateOfLastDayOfMonthBeforeDroppedOnMonth) {
i++;
}
gridLocationOfDrop = (dayOfWeekOfLastDayOfMonthBeforeDroppedOnMonth + i*7 + droppedOnDate);
}
}
selector = '#calendar > .fc-content table tr > td.fc-day' + gridLocationOfDrop;
return selector;
}
Works for me!
I've been working through this for a while and I'm missing the obvious. I'm trying to make sure that if a textbox value is left blank an error isn't thrown and instead a simple message is displayed in the textbox. However, what I've got and several other methods I've tried similar to this haven't worked. I can't figure out why this isn't working and what I need to do differently.
Basics:
This is a simple calculator that allows one to enter their waist, neck, and height measurements to use in a formula that calculates their estimated body fat percentage. The calculation works properly unless a field is left blank.
Thanks for any help!
My code:
if (TBWaist.Text == null || TBNeck.Text == null || TBHeight.Text == null)
{
TBBodyFat.Text = "Value missing";
}
else
if (TBWaist.Text != null & TBNeck.Text != null & TBHeight.Text != null)
{
double waist;
double neck;
double height;
waist = Convert.ToDouble(TBWaist.Text);
neck = Convert.ToDouble(TBNeck.Text);
height = Convert.ToDouble(TBHeight.Text);
TBBodyFat.Text = Convert.ToString(String.Format("{0:p2}", ((501.5 / (1.0324 - .19077 * (Math.Log10(waist - neck)) + .15456 * (Math.Log10(height))) - 450) / 100)));
Error Message
This is the error message I get if I leave the waist textbox blank. I get the same error if I leave any of the others blank as well.
Input string was not in a correct format on line 45.
waist = Convert.ToDouble(TBWaist.Text);
I would recommend using the TryParse methods. In this way, a blank, an empty string or something that is not convertible to a string are all treated the same. Second, I would recommend adding RequiredFieldValidators and/or RegularExpressionValidators to each of the text boxes to ensure that the user enters a value and that value is numeric. In this way, the check in your event procedure acts as a last ditch check instead of requiring a PostBack for validation
protected void Button1_Click(object sender, EventArgs e)
{
//Navy Men's Body Fat Formula: %Fat=495/(1.0324-.19077(log(abdomen-neck))+.15456(log(height)))-450
//string outputString = String.Format("At loop position {0}.\n", i);
double waist;
double neck;
double height;
if ( !double.TryParse( TBWaist.Text, out waist )
|| !double.TryParse( TBNeck.Text, out neck )
|| !double.TryParse( TBHeight.Text, out height ) )
{
ErrorMessageLabel.Text = "Please ensure that each value entered is numeric.";
return;
}
var bodyFat = (501.5
/ (1.0324 - .19077 * (Math.Log10(waist - neck))
+ .15456 * (Math.Log10(height))
) - 450 ) / 100;
TBBodyFat.Text = bodyFat.ToString("P2");
}
You should test for more than just null values you have to test for empty as well
use String.IsNullOrEmpty(TBWaist.Text);
How about using a RequiredFieldValidator?
Alternatively, you can check that the value is an empty string and/or null
if (
String.IsNullOrEmpty(TBWaist.Text) ||
String.IsNullOrEmpty(TBNeck.Text) ||
String.IsNullOrEmpty(TBHeight.Text)
)
Try a compare like
if( String.IsNullOrEmpty( TBWaist.Text ) == true )
{
// error case
}
else
{
// do stuff
}
You should use String.IsNullOrEmpty() instead. Your input field values are not null, simply empty, hence the conversion fails.
protected void Button1_Click(object sender, EventArgs e)
{
//Navy Men's Body Fat Formula: %Fat=495/(1.0324-.19077(log(abdomen-neck))+.15456(log(height)))-450
//string outputString = String.Format("At loop position {0}.\n", i);
if (String.IsNullOrEmpty(TBWaist.Text) || String.IsNullOrEmpty(TBNeck.Text) || String.IsNullOrEmpty(TBHeight.Text))
{
TBBodyFat.Text = "Value missing";
}
else
{
double waist;
double neck;
double height;
waist = Convert.ToDouble(TBWaist.Text);
neck = Convert.ToDouble(TBNeck.Text);
height = Convert.ToDouble(TBHeight.Text);
TBBodyFat.Text = Convert.ToString(String.Format("{0:p2}", ((501.5 / (1.0324 - .19077 * (Math.Log10(waist - neck)) + .15456 * (Math.Log10(height))) - 450) / 100)));
}
}