The stack overflow community helped me figure out how to add two different sized lines behind my section title on my website. The method can be viewed in this JS Fiddle: http://jsfiddle.net/dCZR4/1/
It was working properly, until I included the Twitter Bootstrap 3.0 CSS in my layout. Now, the two lines appear right on top of each other, making one thick line behind the text. This can be seen here: http://onedirectionconnection.com/tester/
If anybody could advice me on what could be causing this hiccup, it would be greatly appreciated.
The CSS for the header is below:
.section-title{
font-family: 'Lato', 'Asap','Quicksand', 'Droid Sans', sans-serif;
position: relative;
font-size: 30px;
z-index: 1;
overflow: hidden;
text-transform: uppercase;
text-align: center;
}
.section-title:before, .section-title:after {
position: absolute;
top: 40%;
overflow: hidden;
width: 50%;
height: 4px;
content: '\a0';
border-bottom: 3px solid #DA5969;
border-top: 1px solid #DA5969;
}
.section-title:before {
margin-left: -52%;
text-align: right;
}
.section-title:after {
margin-left:2%;
text-align:left;
}
And the HTML is:
<div class="section-title">Title Goes Here</div>
(In the JSFiddle, it is simply defined as h1, but I changed it in my layout)
Thanks in advance for any help offered!
Bootstrap applies the box-sizing: border-box by default.
You would need to reset that to box-sizing:content-box for this particular requirement.
.section-title:before, .section-title:after {
position: absolute;
top: 40%;
overflow: hidden;
width: 50%;
height: 4px;
content: '\a0';
border-bottom: 3px solid #DA5969;
border-top: 1px solid #DA5969;
box-sizing: content-box; /* + vendor specific versions here */
}
Related
My CSS style not working properly for IE 11 and Safari browsers. I searched every possible place to find an answer but failed. a lot of people talking about cross-browser CSS problem but no one did a working example and show how it's done properly. so if you guys know please help me to overcome this issue.
this is a part of my CSS I found not working for IE and safari
<style> .lap_drop_dwn:before {
content:"";
position: absolute;
right: 31px;
top: -10px;
width: 0;
height: 0;
border-style: solid;
border-width: 0px 10px 10px 10px;
border-color: transparent transparent rgb(0,0,0,0.5) transparent;
}
.drop_dwn_items {
display: block;
width: 100%;
height: 50px;
background-color: rgb(0,0,0,0.5);
text-decoration: none;
line-height: 50px;
font-size: 22px;
color: #fff;
padding: 0 20px;
text-align: center;
}
</style>
this is a part I found, but my CSS file is quite large so there could be many so hard to find manually. it would be better if there is some script which automatically fixes those errors according to particular browser needs.
I have tag me box to add the tag.
http://jsfiddle.net/hailwood/u8zj5/
I was trying to change it's looks using css.
I wanted to create tags and box to look like in this code:
http://jsfiddle.net/hAz5A/20/
I added the css in first but does not make change. Can any css guys help me out?
Just add the css from the second fiddle into the first fiddle
Note: if you want to remove the 'x' - delete tag (for some reason) then add display: none to your tagit-close class
FIDDLE
FIDDLE without delete button
ul.tagit.ui-widget li.tagit-choice {
display: block;
float: left;
position: relative;
line-height: inherit;
border-radius: 6px;
background-color: #EFEFEF;
border: 1px solid #DDD;
padding: 5px 15px 5px 5px;
margin-right: 10px;
color: #08c;
text-decoration: none;
}
ul.tagit.ui-widget li.tagit-choice a.tagit-close {
cursor: pointer;
position: absolute;
right: 5px;
top: 50%;
margin-top: -8px;
}
I'm trying to create a custom checkbox only using css and no images, but I am having a bit of trouble.
I followed a few tutorials online, but I seem to have hit a road block and help would be great.
My css looks like this
input[type='checkbox'] {
-webkit-appearance: none;
background: #dee1e2;
width: 1.3em;
height: 1.3em;
border-radius: 3px;
border: 1px solid #555;
position: relative;
bottom: .3em;
}
input[type='checkbox']:checked {
-webkit-appearance: none;
background: #dee1e2;
width: 1.3em;
height: 1.3em;
border-radius: 5px;
position: relative;
bottom: .3em;
-webkit-transform: rotate(45deg);
}
What keeps happening is when I do the rotate the whole box rotates and I have tried adding a :after to it, but it didn't seem to do anything.
You could use a unicode check, or even an icon font if you want to get really fancy...
input[type='checkbox'] {
-webkit-appearance: none;
background: #dee1e2;
width: 1.3em;
height: 1.3em;
border-radius: 3px;
border: 1px solid #555;
position: relative;
bottom: .3em;
}
/* added content with a unicode check */
input[type='checkbox']:checked:before {
content: "\2713";
left: 0.2em;
position: relative;
}
Demo
As a matter of fact I tried the same thing on my website (http://e-home.mx) but I ended up hiding the input element with css and adding a label to each one which is the one that "emulates" its behavior like this:
HTML
<input type="checkbox" id="c8" name="c8" />
<label for="c8"><span></span>Label here</label>
CSS:
input[type="checkbox"] + label{color:#000;font-family:Arial, sans-serif;}
input[type="checkbox"] + label span{
display:inline-block;
width:19px;
height:19px;
margin:-1px 4px 0 0;
vertical-align:middle;
background:url("http://e-home.mx/html5/img/form_elements_outlined.png") left top no-repeat;
cursor:pointer;
}
input[type="checkbox"] {display:none}
input[type="checkbox"]:checked + label span {
background:url("http://e-home.mx/html5/img/form_elements_outlined.png") -19px top no-repeat;
}
Here is the fiddle:
http://jsfiddle.net/xedret/bTAGU/
I have a case where my design requires me to declare this class:
.panel {
position: fixed;
top: 100vh;
height: 90vh;
margin: 0px;
padding: 0px;
width: 100%;
transition-property: top;
transition-duration: 1s;
}
.panel:before {
background-color: inherit;
top: -1.5em;
width: 10em;
text-align: center;
font-weight: bold;
content: attr(id);
position: absolute;
border-bottom: none;
border: .5em solid black;
border-top-color: inherit;
border-left-color: inherit;
border-right-color: inherit;
border-bottom: none;
border-radius: 25%;
border-bottom-right-radius: 0%;
border-bottom-left-radius: 0%;
}
In short, panels are tabs that fly in when targeted via an foo style link.
In their default state panels sit just under the bottom of the screen,
This creates a row of hidden panel objects whose before's appear as tabs across the bottom of the screen.
HTML for these panels is <section id="about" class="panel color">...</section> (where the color classes are effectively presentational for the moment, but will be upgraded to reflect specific tab purposes.
So, the challenge I'm trying to solve is that status bars will block the panel tabs which feels wrong, and I believe the solution is to bump them up a little bit (3 or 4 VH) when any link is hovered. This preserves status bar integrity, link integrity and the look of the site; treating the status bar as if it were a window resize.
I had believed that a:hover ~ * .panel { top: 97vh; } was the correct solution to do this, but it doesn't seem to be firing.
I've read about postion:absolute problems and tried almost every possible solution. Including positioning divs relatively, wrapping them in a relatively positioned parent etc etc, but it didn`t help.
I'm drawing a table and after that im putting divs in it in a specified place. Table (grid) prints fine but places where divs should be are printed in slightly different color and divs aren`t there. In chrome it prints ok. Has anyone managed to find a solution yet? Maybe I'm doing something else wrong?
My css:
body
{
margin: 0px;
padding: 0px;
font-family: Verdana;
-moz-user-select: none;
}
.grid
{
height: 100%;
border: 1px solid;
border-collapse: collapse;
}
.grid tr
{
text-align:center;
border-bottom: 1px dashed;
cursor: cursor;
}
.grid td.hourCell
{
width: 100px;
vertical-align:top;
font-size: 10px;
font-weight: 500;
height: 60px;
}
.grid th.hourCell
{
width: 100px;
}
.grid th
{
font-weight: bold;
height: 20px;
width: 200px;
font-size: 12px;
font-weight: 500;
font-family: Verdana;
border-right: 1px solid;
background-repeat: repeat;
cursor: cursor;
}
.grid td
{
height: 30px;
width: 200px;
vertical-align: top;
}
.div_which_doesnt_print
{
padding: 0px;
margin: 0px;
width: 200px;
font-size: 10px;
font-family: Verdana;
height: 0px;
position: absolute;
border-style: solid;
border-width: thin;
overflow: hidden;
opacity:0.7;
z-index: 3;
}
Every help would be greatly appreciated! Even reassuring me that solution is still unavaible.
EDIT: It looks like it was an issue with opacity. Setting
#media print
{
.div_which_doesnt_print
{
opacity:1;
}
}
Fixed the issue with visibility. They still display sometimes in wrong places, but that`s a different issue.
It looks like it was an issue with opacity. Setting
#media print
{
.div_which_doesnt_print
{
opacity:1;
}
}
Fixed the issue with visibility. They still display sometimes in wrong places, but that`s a different issue.
If you are Inserting the Divisions Inside the Table Cells, then just give the Cell TD/TR position to relative and then give absolute positioning to the div inside it.
This was working fine for me in few projects.
I hope this helps.