I would like to setup my Nginx server so
/app/portnum
type URLs are reverse proxied to
localhost:portnum
E.g.
/app/1234
would be reverse proxied to
localhost:1234
This may be helpful:
server {
listen 80;
server_name test1.test.com;
location ~ ^/app/(.*)$ {
proxy_pass http://192.168.154.102:$1;
}
}
Notice: If you visit test1.test.com/app/8081, nginx will pass the request to http://192.168.154.102:8081/app/8081.
More information about proxy_pass
Related
I have 2 domains domain.xyz and domainxyz.com
I have the boilerplate for a dynamic routing service set up on domain.xyz which serves domain.xyz/example-uri.
I would like to make domainxyz.com/example-uri resolve to domain.xyz/example-uri
On the server I am using Nginx to direct requests on port 80 to the React app
instead of using a dns redirect to resolve the .com to the .xyz (which is what I was initially doing), direct both domains to the nginx server. Then configure the nginx server like this:
source/explanation: https://www.nginx.com/blog/creating-nginx-rewrite-rules/
server {
listen 80;
server_name www.domainxyz.com domainxyz.com;
location / {
return 301 $scheme://domain.xyz$request_uri;
proxy_pass http://localhost:3000;
}
}
server {
listen 80;
server_name www.domain.xyz domain.xyz;
location / {
proxy_pass http://localhost:3000;
}
}
My goal is to have NGINX act as a load balancer for an API that is on different ports on my local computer. The issue is the API I am using needs to point to a specific location on the server in order to work. In the example below I am using NGINX only as a reverse proxy.
server {
listen 80;
server_name localhost;
location / {
proxy_pass http://localhost:8080/api/darkshield/searchContext.mask;
}
I have a python script that acts as the user and it works no problem. The issue is when I try to create an upstream to have NGINX act as the load balancer for the API.
upstream backend{
server localhost:8080;
server localhost:8081;
}
server {
listen 80;
server_name localhost;
location / {
proxy_pass http://backend/;
}
In the upstream when I create the group of servers I can't add the "/api/darkshield/searchContext.mask" to the end of the port number like I could in the first example because NGINX won't run. From what I've seen I can only use an IP and Port Number. Is there a way to add the missing information once a server has been picked from the upstream?
I have many different technologies serving APIs and sites on my local machine. I want to be able to see them via human-readable names, rather than ports.
For example, I have:
localhost:8000 => laravel api for user panel
localhost:8001 => laravel api for admin panel
localhost:3000 => react client for user panel
localhost:3001 => nextjs client for site
localhost:3002 => react client for admin panel
And this list goes on.
Remembering all these ports is not possible of course. Thus I thought to setup a reverse proxy for them:
api.user.example.local
api.admin.example.local
example.local
user.example.local
admin.example.local
I know I have to add these host headers to /etc/hosts file. I also read about how to configure nginx as a reverse proxy for one domain.
I don't know how to do it for many sites. And only as a reverse proxy, not as a server.
Please note: I'm not considering myself as really super nginx expert, just starting to learn nginx, but I think I can help you with this task.
Here is my approach:
First, make sure your default nginx config (usually /etc/nginx/nginx.conf) has line include /etc/nginx/conf.d/*.conf; in its http block, so you may specify internal servers in separate config files for ease of use.
Create additional config file /etc/nginx/conf.d/local_domains.conf and add following server blocks in it:
server {
listen 80;
server_name api.user.example.local;
location / {
set $target http://localhost:8000;
proxy_pass $target;
}
}
server {
listen 80;
server_name api.admin.example.local;
location / {
set $target http://localhost:8001;
proxy_pass $target;
}
}
server {
listen 80;
server_name example.local;
location / {
set $target http://localhost:3000;
proxy_pass $target;
}
}
server {
listen 80;
server_name user.example.local;
location / {
set $target http://localhost:3001;
proxy_pass $target;
}
}
server {
listen 80;
server_name admin.example.local;
location / {
set $target http://localhost:3002;
proxy_pass $target;
}
}
On the client machine, add these records to the hosts file
192.168.1.1 api.user.example.local
192.168.1.1 api.admin.example.local
192.168.1.1 example.local
192.168.1.1 user.example.local
192.168.1.1 admin.example.local
Where 192.168.1.1 is the address of your nginx server.
That's it, it should work if your internal servers are using HTTP protocol.
But if you need to use HTTPS for internal servers and for the main nginx server, modify each server block as follows:
server {
listen 443 ssl http2;
server_name api.user.example.local;
ssl_certificate /usr/local/share/ca-certificates/example.local.crt;
ssl_certificate_key /usr/local/share/ca-certificates/example.local.key;
add_header Strict-Transport-Security "max-age=31536000" always;
location / {
set $target https://api.user.example.local:8000;
proxy_pass $target;
}
}
and so on
ssl_certificate and ssl_certificate_key should point to correct certificate and key files for the domain.
If you would like nginx main server to listen port 80 and redirect all traffic to https, add additional server blocks for each server:
server {
server_name api.user.example.local;
listen 80;
# Force redirection to https on nginx side
location / {
return 301 https://$host$request_uri;
}
}
and so on
More information on NGINX Reverse Proxy
NGINX Reverse Proxy
Module ngx_http_proxy_module
So, I'm running some docker containers serving on ports 8090 and 8000. Now I want to setup Nginx reverse proxy to handle requests to both of these ports internally. The main URL http://milesblock.com changes automatically to http://milesblock.com/#/
I have setup a proxy_pass in nginx as follows-
server {
listen 80 default_server;
listen [::]:80 default_server;
server_name milesblock.com;
root /usr/share/nginx/html;
# Load configuration files for the default server block.
include /etc/nginx/default.d/*.conf;
location / {
proxy_pass http://127.0.0.1:8090;
}
location /api {
rewrite ^/api(.*) $1 break;
proxy_pass http://127.0.0.1:8000;
}
}
Now, the issue is because of the automatic change of the URL to http://milesblock.com/#/ the redirect to both the ports is not working as intended. Only the /api proxy is working with the above config file.
How do i configure the proxy to handle the traffic on port 8090 and also the api calls on port 8000?
I am trying to proxy_pass to a website, But I want the request header host to be the same as the website I passed.
I have tried to use "proxy_set_header Host $proxy_host" (and tried change the value to $host, even the exact hostname I want. But when I use google chrome to check the request host, it is still the server IP that I used to set up the proxy_pass.
Below is my config, please help
location / {
proxy_pass https://example.com;
proxy_set_header Host $proxy_host;
proxy_set_header X-Original-URI $request_uri;
}
Thank you
Check the examples from the docs:
nginx first decides which server should process the request. Let’s start with a simple configuration where all three virtual servers listen on port *:80:
server {
listen 80;
server_name example.org www.example.org;
...
}
server {
listen 80;
server_name example.net www.example.net;
...
}
server {
listen 80;
server_name example.com www.example.com;
...
}
In this configuration, nginx tests only the request’s header field Host to determine which server the request should be routed to. If its value does not match any server name, or the request does not contain this header field at all, then nginx will route the request to the default server for this port. In the configuration above, the default server is the first one — which is nginx’s standard default behaviour. It can also be set explicitly which server should be default, with the default_server parameter in the listen directive:
server {
listen 80 default_server;
server_name example.net www.example.net;
...
}
Now keep in mind that $host is specifically the first server_name that is defined in the current server block. if you have multiple server_name's, only the first one will appear, but if want your backend to receive a fixed host name, use:
proxy_set_header Host "your.fixed.hostname";