Do not see BizTalk projects in VS 2010 Ultimate - biztalk

I have a Visual Studio 2010 Ultimate installed on my local machine. I used it for c# development for quite some time.
Now I have a project for BizTalk development. When I click New Project I do not see the BizTalk project option.
What do I need to do to get BizTalk projects on my Visual Studio 2010 Ultimate?

You will need to download a version of BizTalk from Microsoft and install at least the developer tools and SDK. But usually you will want to do a complete install unless you already have a BizTalk Server you can deploy to for development purposes.
See this thread What do you need to develop in BizTalk

Step1:
Launch BizTalk Setup>Modify>Unselect 'Developer tools SDK'>Complete the installation.
Step 2:
Launch BizTalk Setup>Modify>Select 'Developer tools SDK'>Complete the installation.
After you have performed Step1 and Step 2, or you may have not Installed Developer Tools SDK then perform only Step 2.
Start>>Visual Studio 2010 >> Biztalk >> Biztalk Empty Project>> If you now see it then you can assume that your Developer Tools have been successfully installed.
https://social.technet.microsoft.com/wiki/contents/articles/25177.biztalk-server-start-developing-a-simple-biztalk-application-for-biztalk-beginners.aspx

Related

How to install Biztalk 2020 Project Templates in Visual Studio 2019?

I did full install of BizTalk including developer tools (after installing Visual Studio 2019). I have also done a repair and reboot since then.
I see this .vsdir file on the disk: "c:\Program Files (x86)\Microsoft BizTalk Server\Developer Tools\BizTalkProjects\BTSProjects.vsdir", but not sure how to make it work with VS2019.
File contains this:
Schema Files|{7a51b143-7eea-450d-baef-827253c52e43}|#221|140
BTSFlatFileSchema.vsz|{7a51b143-7eea-450d-baef-827253c52e43}|#134|7|#135|0|229|0|#136
JSONSchemaWizard.vsz|{7a51b143-7eea-450d-baef-827253c52e43}|#144|8|#145|0|229|0|#146
##Documentation about Adding Wizards to the Add Item could be found here http://msdn.microsoft.com/en-us/library/2sc7ft4a.aspx
The link in the file refers to a Visual Studio 2014 web page.
Expected result, click "Create New Project" in BizTalk, type BizTalk and be able to pick the template.
I have tried these two commands that might have fixed in older releases, not sure if they are applicable with VS2019:
devenv /setup templates
devenv /InstallVSTemplates
Copied from Biztalk 2020 - Project not showing in Visual Studio 2019
From the installer:
".To use this feature, you must also install the following: BizTalk Project Extension, Enterprise Single Sign-On (SSO) Administration.For more information on this component, click Help. "
And the Install BizTalk Server 2020 documentation:
To complete Developer Tools component installation, install BizTalk Server extension in Visual Studio.
To achieve this you need to:
Start Visual Studio and load into an empty IDE
Click Extensions, Manage Extensions
Search the online tab for BizTalk Server:
Install the BizTalk Server extension
Close all instances of Visual Studio
Let VSIX installer complete
Start Visual Studio and select BizTalk from the project types

Best practice and solution to migrating BizTalk 2006 application to BizTalk 2016 environment?

Is there any hidden tool from MS we can use for BizTalk application migration prior to load solution into VS2015 ? I need some information about what are characteristic we may need to change specially BizTalk.btproj solution to load all project file etc., wonder to know easy approach migrating BizTalk application solution if any.
As various blogs posts and MSDN threads you needed to have an intermediate Development BizTalk environment (BizTalk 2010) and then upgrading it to the later version like BizTalk 2013/R2 and up.
You can download the developer edition here and install the SDK so you can open it in Visual Studio.
The only other way to migrate is to create new BizTalk Projects in Visual Studio 2015 / BizTalk 2016 environment, and then copying the artefacts such as Schemas, maps and re-creating any Orchestrations.
In either case you will have to do extensive retesting as there are certain changes such as the XSLT compiled transform that may cause you issues
No need for a hidden tool. Visual Studio is the tool.
When you open a downlevel Solution, Visual Studio will attempt to update any project and provide a report of what was automatically updated and what could not be updated, requiring manual intervention.
You can do this on a copy of you Solution to get a preview of any work necessary for the real upgrade.
Coming from BizTalk Server 2006, you will need an intermediate version to eventually target BizTalk Server 2016. You can download BizTalk Server 2010 from MSDN. All you need to install is the SDK. You don't need to setup/configure full BizTalk Server.

Unable to see biztalk project template in Visual Studio 2013 Ultimate

I have installed BizTalk 2013 R2 on Windows Server 2012 R2 and Visual Studio 2013 Ultimate is also installed on the same machine.
I cannot see BizTalk Project template while creating a new project in Visual Studio.
When I ran the BizTalk setup again, Developer Tools box was not selected. When I select the box it gives following message
Features you selected requires the following components to be installed:
WCF HTTP ACTIVATION 4.5, IIS ASP NET 4.5
When I check in the Server Manager, both of the above are already installed.
Kindly help me resolve this issue.
Have you registered ASP.NET 4.5 on the machine?
Try running this command:
aspnet_regiis -i
You can read more about the ASP.NET IIS Registration Tool (Aspnet_regiis.exe) here:
http://msdn.microsoft.com/en-us/library/k6h9cz8h%28v=vs.100%29.aspx
The easiest way to do this would be to run the Visual Studio Command Prompt.
Also make sure to run as an administrator.
To restore the default project templates
In the command prompt, navigate to the location of devenv.exe. This file is located in \Common7\IDE.
Type "devenv /installvstemplates" and press Enter.
NoteNote:
If you are using an Express Edition of Visual Studio, type "Express /installvstemplates" where is either VB, VJS, or VCS for Visual Basic, Visual J#, and Visual C#, respectively.
If this procedure does not restore the default templates, reinstall Visual Studio.
U can follow this link also:
https://social.msdn.microsoft.com/Forums/vstudio/en-US/f1cd2e14-1d7e-4b84-8bc2-871d67e2a942/devenvexe-installvstemplates-not-install-propertly

How can I add / download web development settings to my existing Visual Studio installation?

When Visual Studio 2010 (10.0.4 SP1) was installed on my machine, it seems no web development settings were installed. There are no web projects under templates, and Web Development Settings do not appear under the default settings list (Under Tools->Import Export Settings).
I don't know for sure that I'm not just missing some big obvious 'Switch to Web Development Mode' button somewhere, but I've had a good Google and a look and I cant see anything.
I would rather not have to install Visual Web Developer. Is there some way I can add web development settings to my existing install of Visual Studio?
Here are the steps to install it while installing Web Deploymnet Settings
· Insert the DVD or CDROM Disk 1 – the Setup program starts automatically.
· Click Install Visual Studio 2010 and follow the instructions.
o This installs Visual Studio, the .NET framework, the development web server, and SQL Server 2008 Express.
o If you are installing Visual Web Developer 2010 Express Edition, it does NOT install SQL Server 2008 Express – you’ll need to download SQL Server 2008 and install it separately.
· On the Options page accept Default option – for the Default Environment Settings you can select Web Development Settings.
· Click the Install Product Documentation link to install the MSDN help files.
You must have missed it so run the setup again and as you don't want to reinstall VS you'll be asked to repair the setup there you can select the feature
refer:http://www.siue.edu/~dbock/cmis460/Module%20A%20--%20Appendix%20A%20in%20textbook/ModuleA-InstallSoftware.htm
http://www.microsoft.com/web/gallery/install.aspx?appid=VWDorVS2010SP1Pack
This adds the web development parts to an installed version of visual studio that lacks them (along with all the other tool you require for web development)

visual studio 2008 asp.net project templates missing

My desktop management team have just installed visual studio 2008 and there is no pluggins for asp.net ..
is this missed out while they installed visual studio?
can this to be installed again??
Did they install the Web Development tools? It's an option in the installer.
If you go to Help | About you should see something like:
Microsoft Visual Web Developer 2008
listed in the "Installed Products" list.
Running the installer a second time, and ensuring that option is checked should resolve the issue.
Double-check the project templates folder first:
http://msdn.microsoft.com/en-us/library/y3kkate1.aspx
and see if the templates are there. You can always try repairing the VS installation...

Resources