The following command works great for me for a single file:
scp your_username#remotehost.edu:foobar.txt /some/local/directory
What I want to do is do it recursive (i.e. for all subdirectories / subfiles of a given path on server), merge folders and overwrite files that already exist locally, and finally downland only those files on server that are smaller than a certain value (e.g. 10 mb).
How could I do that?
Use rsync.
Your command is likely to look like this:
rsync -az --max-size=10m your_username#remotehost.edu:foobar.txt /some/local/directory
-a (archive mode - the sync is recursive, transfers ownership, attributes, symlinks among other things)
-z (compresses transfer)
--max-size (only copies files up to a certain size)
There are many more flags which may be suitable. Checkout the docs for more details - http://linux.die.net/man/1/rsync
First option: use rsync.
Second option, and it's not going to be a one liner, but can be done in three or four lines:
Create a tar archive on the remote system using ssh.
Copy the tar from remote system with scp.
Untar the archive locally.
If the creation of the archive gets a bit complicated and involves using find and/or tar with several options it is quite practical to create a script which would do that locally, upload it on the server with scp, and only then execute remotely with ssh.
Related
Upon my initial looking both cp and rsync will copy an entire directory structure.
That being said, what is the purpose for each and which is better?
cp -R $source $destination
vs
rsync -auq $source $destination
I was trying to look into and figure this out more, but they both seemed to copy an entire directory around the same speed.
Does one leverage another? When cloning someone's HD which is the best course of action and why?
I think the main purpose of rsync not to copy directory from to the same system or machine It efficiently copies and sync files to or from a remote system.
Remote system like two different machines
and if you need the difference if you use them locally see this link
Hi I want to use rsync to move data from sourcehost to desthost but the directory structure is not 100% what I want.
sourcehost:
crappy_dir
another_crappy_dir
i_like_this_one
and_this too
file
desthost should have:
my_cool_dir
i_like_this_one
and_this too
file
this is my files_to_include.txt:
/crappy_dir/another_crappy_dir/i_like_this_one/and_this_too/file
and my current test rsync command:
desthost# rsync -aAHXv -e ssh --files-from=files_to_include.txt sourcehost: /my_cool_dir
but it creates
/my_cool_dir/crappy_dir/another_crappy_dir/i_like_this_one/and_this_too/file
is there any option in rsync to re-write the destination path as I want to? let's say some magical perl-like-regexp like --magical-dest-transformation "s#/crappy_dir/another_crappy_dir/#/#" will do it. I couldn't come up with a good --rsync-command option either. suggestions are welcomed.
Note: this is a several terabytes multi host copy that will take some days to do, a "simple mv" after copying is not good enough because I'll re-run rsync several times. I need it to be smart enough to "peer up" the files.
is there any option in rsync to re-write the destination path as I want to?
No because the sync part of rsync depends on path, filename, and other meta characteristics as well for not just copying but also deleting.
a "simple mv" after copying is not good enough
How about a simple mv before copying? If that's not feasible, why not make a linked folder structure on the source and then rsync that folder structure to the destination?
I need it to be smart enough to "peer up" the files
Did you consider making one rsync command for each file? This way you just have to transform source and dest folders once but can re-run the rsync lines multiple times to peer up.
I found rsync behaves differently in the following two situations:
(1) All the files are copied by using rsync, then using rsync again will be fast (skip all the files);
(2) Use cp to copy files, then using rsync will be slow (or may be run freshly?)
So my confusion is "Does rsync generate any internal things on the files so that it can refer to avoid duplicate checking?"
rsync -a (in archive mode, which I presume you ran) retains all attributes of a file, including creation/modification time. cp does not. I suppose something in the file attributes that's different when you use cp, probably a later modification time, in the destination files, made rsync think they are newer files, so it either recopied them or had to check the contents.
The following command is working as expected...
cp -ur /home/abc/* /mnt/windowsabc/
Does rsync has any advantage over it? Is there a better way to keep to backup folder in sync every 24 hours?
Rsync is better since it will only copy only the updated parts of the updated file, instead of the whole file. It also uses compression and encryption if you want. Check out this tutorial.
rsync is not necessarily more efficient, due to the more detailed inventory of files and blocks it performs. The algorithm is fantastic at what it does, but you need to understand your problem to know if it is really going to be the best choice.
On a very large file system (say many thousands or millions of files) where files tend to be added but not updated, "cp -u" will likely be more efficient. cp makes the decision to copy solely on metadata and can simply get to the business of copying.
Note that you might want some buffering, e.g. by using tar rather than straight cp, depending on the size of the files, network performance, other disk activity, etc. I find the following idea very useful:
tar cf - . | tar xCf directory -
Metadata itself may actually become a significant overhead on very large (cluster) file systems, but rsync and cp will share this problem.
rsync seems to frequently be the preferred tool (and in general purpose applications is my usual default choice), but there are probably many people who blindly use rsync without thinking it through.
The command as written will create new directories and files with the current date and time stamp, and yourself as the owner. If you are the only user on your system and you are doing this daily it may not matter much. But if preserving those attributes matters to you, you can modify your command with
cp -pur /home/abc/* /mnt/windowsabc/
The -p will preserve ownership, timestamps, and mode of the file. This can be pretty important depending on what you're backing up.
The alternative command with rsync would be
rsync -avh /home/abc/* /mnt/windowsabc
With rsync, -a indicates "archive" which preserves all those attributes mentioned above. -v indicates "verbose" which just lists what it's doing with each file as it runs. -z is left out here for local copies, but is for compression, which will help if you are backing up over a network. Finally, the -h tells rsync to report sizes in human-readable formats like MB,GB,etc.
Out of curiosity, I ran one copy to prime the system and avoid biasing against the first run, then I timed the following on a test run of 1GB of files from an internal SSD drive to a USB-connected HDD. These simply copied to empty target directories.
cp -pur : 19.5 seconds
rsync -ah : 19.6 seconds
rsync -azh : 61.5 seconds
Both commands seem to be about the same, although zipping and unzipping obviously tax the system where bandwidth is not a bottleneck.
Especially if you use a copy-on-write filesystem like BTRFS or ZFS, rsync is much better.
I use BTRFS, and I have this in my ~/.bashrc:
alias cp="rsync -ah --inplace --no-whole-file --info=progress2"
The important flag here for CoW FSs like BTRFS is --inplace because it only copies the changed part of the files, doesn't create new inodes for small changes between files, etc. See this.
It's not really a question of what's more efficient.
The commands 'rsync', and 'cp' are not equivalent and achieve different goals.
1- rsync can preserve the time of creation of existing files. (using -a option)
2- rsync will run multiprocess and transfer using either local sockets or network sockets. (i.e. fork itself into multiple processes)
3- The multiprocessing, and threading will increase your throughput when copying large number of small files, and even with multiple larger files.
So bottom line is rsync is for large data, and cp is for smaller local copying. (MB to small GB range). When you start getting into multiple GB or in the TB range, go with rsync. And of course network copies, rsync all the way.
For a local copy, the only advantage of rsync is that it will avoid copying if the file already exists in the destination directory. The definition of "already exists" is (a) same file name (b) same size (c) same timestamp. (Maybe same owner/group; I am not sure...)
The "rsync algorithm" is great for incremental updates of a file over a slow network link, but it will not buy you much for a local copy, as it needs to read the existing (partial) file to run it's "diff" computation.
So if you are running this sort of command frequently, and the set of changed files is small relative to the total number of files, you should find that rsync is faster than cp. (Also rsync has a --delete option that you might find useful.)
Keep in mind that while transferring files internally on a machine i.e not network transfer, using the -z flag can have a massive difference in the time taken for the transfer.
Transfer within same machine
Case 1: With -z flag:
TAR took: 9.48345208168
Encryption took: 2.79352903366
CP took = 5.07273387909
Rsync took = 30.5113282204
Case 2: Without the -z flag:
TAR took: 10.7535531521
Encryption took: 3.0386879921
CP took = 4.85565590858
Rsync took = 4.94515299797
if you are using cp doesn't save existing files when copying folders of the same name. Lets say you have this folders:
/myFolder
someTextFile.txt
/someOtherFolder
/myFolder
wellHelloThere.txt
Then you copy one over the other:
cp /someOtherFolder/myFolder /myFolder
result:
/myFolder
wellHelloThere.txt
This is at least what happens on macOS and I wanted to preserve the diff files so I used rsync.
I will prefer to use rsync with the following options
rsync -avhW --no-compress --progress --info=progress2 <src directory> <dst directory>
The above parameters can be defined as follows :
-a for the archive to preserves ownership, permissions, etc.
-v for verbose
-h for human-readable
-W for copying whole files only
--no-compress as there's no lack of bandwidth between local devices
--progress to see the progress of large files
--info=progress2 to see the overall progress
source directory path
destination directory path
rsync is much much better compared to cp because rsync copies whole files/directory only the first time. The next time when you use rsync command with the same files/directory, only new changes are copied to the destination folder, not the entire files are copied.
I used rsynk to transfer 330G data from a local HD to a external HD via USB 3.0. It took me three days. The transfer rate went down to 800 Kb/s and rised to 50 M/s for a while only after pausing the job. It is a typical overbuffering issue. Bad experience for local file tranfers: as the name indicates, (R)sync stands for REMOTE-sync (optimized for tranfers via network). As often happens, I discovered the "-z" flag only after I wondered about the issue and looked for an understandment
I want to use rsync to synchronize two directories in both directions.
I refer to synchronization in classical sense
(not how it is meant in rsync manuals):
I want to update the directories in both directions,
depending on which of them is newer.
Can this be done by rsync (preferable in a Linux-way)?
If not, what other solutions exist?
Just run it twice, with "newer" mode (-u or --update flag) plus -t (to copy file modified time), -r (for recursive folders), and -v (for verbose output to see what it is doing):
rsync -rtuv /path/to/dir_a/* /path/to/dir_b
rsync -rtuv /path/to/dir_b/* /path/to/dir_a
This won't handle deletes, but I'm not sure there is a good solution to that problem with only periodic sync'ing.
Do you know Unison File Synchronizer?
Unison is a file-synchronization tool
for Unix and Windows. It allows two
replicas of a collection of files and
directories to be stored on different
hosts (or different disks on the same
host), modified separately, and then
brought up to date by propagating the
changes in each replica to the other. ...
Note also that it is resilient to failure:
Unison is resilient to failure. It is
careful to leave the replicas and its
own private structures in a sensible
state at all times, even in case of
abnormal termination or communication failures.
You need to run rsync twice and I recommend to run it with -au:
rsync -au /local/source/* /remote/destination
rsync -au /remote/destination/* /local/source
-a (a for archive) is a shortcut for -rlptgoD:
-r Recurse into sub directories
-l Also sync symbolic links
-p Also sync file permissions
-t Also sync file modification times
-g Also sync file groups
-o Also sync file owner
-D Also sync special (not regular/meta) files
Basically whenever you want to create an identical one-to-one copy using rsync, you should always use -a as that's what most users expect to happen when they talk about "syncing". Other answers here seem to overlook that sometimes the content of a file stays unchanged but its owner may have changed or its access permissions may have changed and in that case rsync would not sync the file which could be fatal.
But you also require -u as that tells rsync to completely leave any file/folder alone, in case it exists already at the destination and has a newer last modification date. Without -u rsync would sync regardless if a file/folder is newer or not.
Please note that this solution cannot handle deleted files. Handling deletes is not easily possible as consider the following situation: A file has been deleted at the source, now how shall rsync know if that file once existed and has been deleted (in that case it must be deleted at the destination as well) or whether it never existed at the source (in that case it must be copied from the destination). These two situations look identical to rsync thus it cannot know how to react correctly. It won't help to sync the other way round as that can lead to the same situation: A file exists at the source but not at the destination. Why? Has it never existed at the destination or has it been deleted? Both cases look identical to rsync.
Sync tools that can reliably sync deleted files usually manage a sync log about all past sync operations. If that log reveals that there once was a file and has been synced but now it is missing, it's clear that it has been deleted. If there never was such a file according to the log, it must be synced. By storing all log entries with timestamps, it's even possible that a deleted file comes back and gets deleted multiple times yet the sync tool will always know what to do and the result is always correct. rsync has no such log, it only relies on the current file state of two sides of the operation.
You can however build yourself a sync command using rsync and a bit POSIX shell scripting which gets already very close to a sync tool as described above. As I needed such a tool myself, here is an answer on Stackoverflow that guides you through the creation of such a script.
Thanks jsight
rsync -urv --progress dir_a dir_b && rsync -urv --progress dir_b dir_a
This would result in the second sync happening immediately after 1st sync is over. In case the directory structure is huge, this will save time, as one does not need to sit before the pc. If the structure is huge, remove the verbose and progress stuff
rsync -ur dir_a dir_b && rsync -ur dir_b dir_a
Use rsync <OPTIONS> [hostname:]source-dir [hostname:]dest-dir
for example:
rsync -pogtEtvr --progress --bwlimit=2000 xxx-files different-stuff
Will sync xxx-files to different-stuff/xxx-files .If different-stuff/xxx-files did not exist, it will create it - i.e. copy it.
-pogtEtv - just bunch of options to preserve file metadata, plus v - verbose and r - recursive
--progress - show progress of syncing in real time - super useful if you copy big files
--bwlimit=2000 - sets maximum speed of copying/syncing (bw = bandwidth)
P.S. rsync is critically important when you work over network in case of local machine you can use commands like cp.
Good Luck!
What you need is Rclone. Rclone ("rsync for cloud storage") is a command line Linux program to sync files and directories to and from different cloud storage providers (box,dropbox,ftp etc) and local filesystems. Rlone supports mirror syncing only.
Another more graphical solution which includes real-time syncing would be to use FreeFileSync, which includes the program RealTimeSync. FreefileSync support 2-way bidirectional syncing which includes handling deletes.
I was having the same question and end up using git. It might not fit your situation, but if anyone find this topic and have the same question, you may consider a version control system.
I'm using rsync with inotifywait.
When you change any file, rsync will be executed.
inotifywait -m --exclude "$_LOG_FILE" -r -e create,delete,delete_self,modify,moved_to --format "%w%f" "$folder"
You need run inotifywait on both host. Please check example inotifywait