Using the following for just connection pooling no master_slave or replication: rhel 6, postgresql 9.1.9, & pgpool-II 3.1.3 (also tried 3.2.5)
Followed solution suggested in http://www.pgpool.net/pipermail/pgpool-general/2013-May/001773.html
After following the instructions for MD5 I also tried setting both pg_hba.conf and pool_hba.conf to trust for local and subnet, but still get the following error when attempting to connect to the pool locally:
ERROR: "MD5" authentication with pgpool failed for user foo
Tried locally on Fedora 18 with pg9.2 and pgpool from Fedora repo and worked right out of the box.
At the end of all routes suggested everywhere I could find.
Help would be greatly appreciated.
After having hit the same problem the solution was to change ownership of the pool_passwd file to postgres.
Even though this file has a 644 permission, if owner isn't postgres you'll always get the aforementioned error. I guess this file's owner and the user running pgpool must match.
I'm running PosgreSQL 9.2 and pgpool-II 3.3.2, BTW.
Related
I want to set up rstudio-server on an iMac with support for multiple users and remote login. I followed the steps in the INSTALL tutorial: I built the source, set up the configuration files and the launchd daemon. At first, it works fine, but after some time, I get these warnings/errors when I plot:
2022-06-09 08:02:29.438 rsession[3050:139329] XType: failed to connect - Error Domain=NSCocoaErrorDomain Code=4099 "The connection to service named com.apple.fonts was invalidated: failed at lookup with error 3 - No such process." UserInfo={NSDebugDescription=The connection to service named com.apple.fonts was invalidated: failed at lookup with error 3 - No such process.}
2022-06-09 08:02:29.438 rsession[3050:139329] Font server protocol version mismatch (expected:5 got:0), falling back to local fonts
2022-06-09 08:02:29.438 rsession[3050:139329] XType: unable to make a connection to the font daemon!
2022-06-09 08:02:29.438 rsession[3050:139329] XType: XTFontStaticRegistry is enabled as fontd is not available.
Then I can't plot any more unless I restart R and re-run my code. Do you know what could be the issue? I could not get any help when opening an issue on the rstudio-server github since MacOS is not officially supported.
I was also looking at running rstudio-server via docker, but I couldn't find a good way to map the user namespace from macOS to the container.
Any help or suggestion would be greatly appreciated!
EDIT: It seems I was able to solve the issue by launching the fontd daemon with:
sudo launchctl load -w /System/Library/LaunchAgents/com.apple.fontd.useragent.plist
This seems like an issue with the MacOS font daemon, not with RStudio itself.
Someone reported a similar issue on PhantomJS. Rebooting resolved it for them.
This answer reported the same error for a different build, and they were able to resolve it by installing the correct "Apple Worldwide Developer Relations Certification Authority" in Keychain:
The one I had had an expiration date of February 2023. I deleted that one and went here, downloaded the one called "Worldwide Developer Relations - G3 (Expiring 02/20/2030 00:00:00 UTC)", then retried the build and it worked.
I am trying to run jupyterhub on an Ubuntu 20.04 LTS server. My idea is to run python/jupyterhub in a conda virtual environment as a system service. As I want to be able to limit the resources available to individual users I installed the systemdspawner.
After installing everything and starting the jupyterhub service I can login through my web browser. However, when trying to start the server the spawner stucks and after a while I get an error message saying "Spawn failed: Timeout"
in journalctl I can see the following messages:
User logged in: me 302 POST /hub/login?next= -> /hub/spawn (me#::ffff:[my IP address]) 59.42ms
Adding role server to token: <APIToken('93c8...', user='me', client_id='jupyterhub')
Creating oauth client jupyterhub-user-me
pam_loginuid(login:session): Error writing /proc/self/loginuid: Operation not permitted
pam_loginuid(login:session): set_loginuid failed
pam_unix(login:session): session opened for user me by (uid=0)
Failed to open PAM session for me: [PAM Error 14] Cannot make/remove an entry for the specified session
Disabling PAM sessions from now on. user:me
Unit jupyter-me-singleuser in a failed state. Resetting state.
Disclaimer: My Jupyter/Python installation is replacing an former installation that was setup by someone else and got messed up a bit during time. I tried to remove everything related and start with a clean installation from scratch. However, as I had very little documentation about the old setup there is a certain risk that there might be some left-overs of the previous installation that may cause trouble.
Any ideas?
Solved it out myself. In the end the PAM related messages seem to be non-critical and were not related to the timeout at all. Instead I found a mistake in /etc/systemd/system/jupyterhub.service, where the PATH variable was not including the bin directory of my miniconda installation.
I am trying to run the example grakn migration "phone_calls" (using python and JSON files).
Before reaching there, I need to load the schema, but I am having trouble with getting the schema loaded, as shown here: https://dev.grakn.ai/docs/examples/phone-calls-schema
System:
-Mac OS 10.15
-grakn-core 1.8.3
-python 3.7.3
The grakn server is started. I checked and the 48555 TCP port is open, so I don't think there is any firewall issue. The schema file is in the same folder (phone_calls) as where the json data files is, for the next step. I am using a virtual environment. The error is below:
(project1_env) (base) tiffanytoor1#MacBook-Pro-2 onco % grakn server start
Storage is already running
Grakn Core Server is already running
(project1_env) (base) tiffanytoor1#MacBook-Pro-2 onco % grakn console --keyspace phone_calls --file phone_calls/schema.gql
Unable to create connection to Grakn instance at localhost:48555
Cause: io.grpc.StatusRuntimeException
UNKNOWN: Could not reach any contact point, make sure you've provided valid addresses (showing first 1, use getErrors() for more: Node(endPoint=/127.0.0.1:9042, hostId=null, hashCode=5f59fd46): com.datastax.oss.driver.api.core.connection.ConnectionInitException: [JanusGraph Session|control|connecting...] init query OPTIONS: error writing ). Please check server logs for the stack trace.
I would appreciate any help! Thanks!
Nevermind -- I found the solution, in case any one else runs into a similar problem. The server configuration file needs to be edited: point the data directory to your project data files (here: the phone_calls data files) & change the server IP address to your own.
I have installed Couchbase 2.2.0 for Windows 7 64 bits. I installed it using the default options. The service gets installed and I can stop/start or restart it without errors. However, I cannot connect to the management console on port 8091.
I've found some posts on how to deal with this but they all relate to older versions of couchbase and reference files/options I can't find in version 2.2 (for example this post : Unable to connect to http://localhost:8091/index.html).
When I try netstat -an -p tcp I can't see any service listening on port 8091 so I suspect something goes wrong during startup.
Looking in the couchbase log in /var/lib/couchbase/logs I can see some errors but they don't make sense to me.
[error_logger:error,2014-02-11T17:13:16.536,babysitter_of_ns_1#127.0.0.1:error_logger<0.6.0>:ale_error_logger_handler:log_msg:76]** Generic server <0.233.0> terminating
** Last message in was {die,{abnormal,3}}
** When Server state == {state,ns_server,5000,
{1392,135189,391066},
undefined,infinity}
** Reason for termination ==
** {abnormal,3}
[ns_server:debug,2014-02-11T17:13:16.536,babysitter_of_ns_1#127.0.0.1:<0.235.0>:supervisor_cushion:init:39]starting ns_port_server with delay of 5000
[error_logger:error,2014-02-11T17:13:16.536,babysitter_of_ns_1#127.0.0.1:error_logger<0.6.0>:ale_error_logger_handler:log_report:72]
=========================CRASH REPORT=========================
crasher:
initial call: supervisor_cushion:init/1
pid: <0.233.0>
registered_name: []
exception exit: {abnormal,3}
in function gen_server:terminate/6
ancestors: [child_ns_server_sup,ns_babysitter_sup,<0.58.0>]
messages: []
links: [<0.73.0>]
dictionary: []
trap_exit: true
status: running
heap_size: 2584
stack_size: 24
reductions: 2365
neighbours:
The windows firewall is running but, since I installed the same version of couchbase on another machine with the same Windows version without troubles I can't imagine that the firewall is causing this trouble.
I'm out of options though, I have no idea why I can't get this to work.
In the meantime, I have uninstalled 2.2 and tried falling back to 2.1 (with the same result) and moving forward to 2.5 (with the same result). In all cases I turned of antivirus software and stopped the Windows firewall to eliminate this cause.
Thanks to the nice people at Couchbase.com, the problem has been solved.
Please refer to :
https://www.couchbase.com/issues/browse/MB-10245
https://www.couchbase.com/issues/browse/MB-8760
The solution is to reinstall couchbase in a location without spaces in the path. Due to a bug, spaces in the installation path lead to trouble.
I'm trying to create a database using DBCA on Oracle 11g installation on Ubuntu Linux 12.04 64 bit.
I followed the instructions here, but I get
ORA-12547: TNS Lost Contact when running DBCA.
Below are the details. Can someone assist with the solution?
Instead of using /opt/oracle as the "oracle" user home, I used /home/oracle
I did not install the libstdc++5 in 32 bit version
I did everything else the same as the posting
Installation resulted in "missing packages". I tried to do an apt-get install for these packages from ubuntu, but ubuntu says that they don't exist.
Then I saw in the instructions:
Once you will reach the "pre-reqs" screen, check "Ignore all" to continue the installation.
When running ./dbca from $ORACLE_HOME/bin, it fails with ORA-12547.
I checked $ORACLE_HOME/network/admin and listener.ora , sqlnet.ora , and tnsnames.ora all look OK.
However, I think that tnsnames.ora is not being read properly, because ./tnsping fails and the error message states that "EZ Connect" was used.
But in my sqlnet.ora , I have
names.directory_lookup = (TNSNAMES,EZCONNECT)
It should use EZ Connect only after tnsnames is tried.
Also, I sometimes get ORA-12541: No listener. I tried running ./netca. Everything is OK until I perform a test on the listener, and it fails.
I can't run ./lsnrctl. Absolutely nothing happens for this, as well as lsnrctl start, stop, status.
I can't go through sqlplus. If I run ./sqlplus , it asks me for username/password directly.
If I do ./sqlplus / as sysdba, then this results in "ORA-12547: TNS lost contact".
All environment variables are set correctly in .bashrc.
I tried re-running root.sh , but the problem is not fixed.
/etc/oratab is OK
/etc/hosts is OK, but I can't always ping the "localhost" or "127.0.0.1", or "ubuntu" or "127.0.1.1"
The same TNS or Listener errors display.
When I login in oracle (sqlplus system/pass as sysdba), I got this:
ERROR:
ORA-12547: TNS :lost contact when try to connect to Oracle.
First, I think the server is down, but I check it, it is OK. And so many body say 'chmod 6751 oracle', I did it, but I got another error:
ERROR:
ORA-01031: insufficient privileges
Enter user-name:
finally, I switch the system user from root to oracle. And I login success.
Ensure the DB is up and running and you can connect locally AS SYSDBA to the database
using Oracle binaries owner (usually oracle:oinstall Unix / Linux user). If it does not
work, probably you encounter a different problem.
1. Check privileges of an Oracle file on Unix / Linux host where database is running:
cd $ORACLE_HOME/bin
ls -ltr oracle
2. Change permissions as below:
chmod 6751 oracle
ls -ltr oracle
This code may help you lot.