i am getting error as
HTTP Error 500.19 - Internal Server Error
The requested page cannot be accessed because the related configuration data for the page is invalid.
have a look at this URL specifically about .19's
http://blogs.iis.net/webtopics/archive/2010/03/08/troubleshooting-http-500-19-errors-in-iis-7.aspx
Related
I am working in web application as soon as I append query string to
something.com/Result.aspx?type=5&city=Kanpur&refine=/or/Vendor_Value_Table.Feature_ID=19/and/(SELECT/CASE/WHEN/ISNUMERIC(value_text)/=/1/THEN/CAST(value_text/AS/INT)/ELSE/-1/END)/between/0/and/100
It gives me this error
HTTP Error 403.0 - ModSecurity Action
You do not have permission to view this directory or page.
While this url is working fine in local host
What I am doing wrong kindly help.
I have always experienced a 500 Internal Server Error to be a web-server error, subsequently logging it as a error.
However, I've been informed that a 500 Internal Server Error can be a application error as well. In this case, it does not seem to log to the web-server when this happens.
Are there cases where it is justified that a 500 Internal Server Error will not report the issue to the web-server error log?
www.w3.org reports:
Internal Error 500
The server encountered an unexpected condition which prevented it from fulfilling the request.
According to the spec, HTTP 5xx status codes are defined as server-side errors. Any client-side problem resulting in an HTTP 5xx error is an incorrect use of HTTP status codes. Client-side issues that prevent requests from being fulfilled should result in HTTP 4xx status codes.
6.6 Server Error 5xx
The 5xx (Server Error) class of status code indicates that the server is aware that it has erred or is incapable of performing the requested method. ...
-- https://www.rfc-editor.org/rfc/rfc7231#section-6.6
6.5 Client Error 4xx
The 4xx (Client Error) class of status code indicates that the client seems to have erred. ...
-- https://www.rfc-editor.org/rfc/rfc7231#section-6.5
If you see the 500 error on a website which is running Microsoft IIS, you may get a more specific error message:
500.0 Module or ISAPI error occurred.
500.11 Application is shutting down on the web server.
500.12 Application is busy restarting on the web server.
500.13 Web server is too busy.
500.15 Direct requests for Global.asax are not allowed.
500.19 Configuration data is invalid.
500.21 Module not recognized.
500.22 An ASP.NET httpModules configuration does not apply in Managed Pipeline mode.
500.23 An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode.
500.24 An ASP.NET impersonation configuration does not apply in Managed Pipeline mode.
500.50 A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred.
500.51 A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred.
500.52 A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred.
500.53 A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated.
500.100 Internal ASP error.
For Apache webserver you can check its log file /var/log/apache2/error.log
For IIS you can find log files in %SystemDrive%\inetpub\logs\LogFiles or %SystemDrive%\Windows\System32\LogFiles\HTTPERR
Currently our application gets the following error page.
Server Error in '/' Application
This even in case of a custom errors set to RemoteOnly.
What is the HTTP Error Code of this error? This because, we can add it under Custom Errors on InetMgr and set it to a Custom Error Page.
Server errors get raised as 500's usually (Internal Server Error).
I've seen servers return 500 Internal Server Error codes with extra 'detail' in a decimal-delimited sub-code, e.g. 500.19.
Is this sub-code standardised or can I freely use it? How do I prevent crashing into vendor codes, say, in IIS or ASP.NET?
Luke
Is this sub-code standardised or can I freely use it?
It is not possible to use it, quote RFC 2616:
The Status-Code element is a 3-digit integer
MSDN says for the HttpResponse.SubStatusCode:
Independent of whether tracing is configured, the code is never sent as part of the final response to the request
So, it is only used for logging and troubleshooting, not sent to the client.
There is a Microsoft standard list. See - http://support.microsoft.com/kb/943891
IIS 7.0 defines the following HTTP status codes that indicate a more specific cause of a 500 error:
500.0 - Module or ISAPI error occurred.
500.11 - Application is shutting down on the web server.
500.12 - Application is busy restarting on the web server.
500.13 - Web server is too busy.
500.15 - Direct requests for Global.asax are not allowed.
500.19 - Configuration data is invalid.
500.21 - Module not recognized.
500.22 - An ASP.NET httpModules configuration does not apply in Managed Pipeline mode.
500.23 - An ASP.NET httpHandlers configuration does not apply in Managed Pipeline mode.
500.24 - An ASP.NET impersonation configuration does not apply in Managed Pipeline mode.
500.50 - A rewrite error occurred during RQ_BEGIN_REQUEST notification handling. A configuration or inbound rule execution error occurred.
Note Here is where the distributed rules configuration is read for both inbound and outbound rules.
500.51 - A rewrite error occurred during GL_PRE_BEGIN_REQUEST notification handling. A global configuration or global rule execution error occurred.
Note Here is where the global rules configuration is read.
500.52 - A rewrite error occurred during RQ_SEND_RESPONSE notification handling. An outbound rule execution occurred.
500.53 - A rewrite error occurred during RQ_RELEASE_REQUEST_STATE notification handling. An outbound rule execution error occurred. The rule is configured to be executed before the output user cache gets updated.
500.100 - Internal ASP error.
We are deploying one site asp.net 1.1 on Windows Web Server2008 R2 running IIS 7.5 on standalone PC. it is working perfectly on the 2003 machine. The 2008 machine is the one giving below trouble;
We are getting below error message:
HTTP Error 405.0 - Method Not Allowed
The page you are looking for cannot be displayed because an invalid method (HTTP verb) is being used.
Module: StaticFileModule
Notification: ExecuteRequestHandler
Handler: StaticFile
1.) We have added the 'POST' verb in to the request permissions on the StaticFile Handler.
2.) What causes an HTTP 405 "invalid method (HTTP verb)" error when POSTing a form to PHP on IIS?
We have tried various suggestions from other forums but none have worked, i would really appreciate some help
If your site uses JSON objects and the "Requested URL" is a *.json file, do the following:
http://www.uipress.com/add-json-handler-support-in-iis-7/#.UT_bw9aOR8E