I'm trying to add a test user to my website that employers can look at to see my work. I want to use some of the data I have entered into my profile so that it is faster.
I have a workouts table:
CREATE TABLE workouts(
id INTEGER NOT NULL,
userID INTEGER NOT NULL,
DateAndTime smalldatetime NOT NULL,
PRIMARY KEY (id),
FOREIGN KEY (UserID) REFERENCES users(id)
);
I have taken 25 of the first results and put it into a temporary workouts2 table:
CREATE TABLE workouts2 (
userid integer,
dateandtime smalldatetime);
Now I want to take those rows from workouts2 and put them into workouts. I have tried to add them by inserting workouts2 into workouts like this:
insert into workouts (id , userID, DateandTime) values (select * from workouts2);
This gives me an Error: in prepare, near "select": syntax error (1)
I can do it one at a time like this:
insert into workouts (userid, dateandtime) values (2, "2022-01-02T06:00");
Doing it one at a time is not ideal.
What am I missing here? I know I have a syntax error but I don't know how to fix it.
I have looked at this question which inserts one at a time:
How to insert a unique ID into each SQLite row?
The problem is it only inserts one at a time.
You should use SELECT instead of VALUES and not include the column id, which is auto-incremented, in the list of columns of workouts which will receive the values (such a column does not exist in workouts2):
INSERT INTO workouts (userID, DateandTime)
SELECT *
FROM workouts2;
I am running into a logical problem.My Trigger is:
create trigger Points1
on Posts
after insert, update
As
declare #value int
declare #postedby int
select #value= Count(Message) from Posts
select #postedby = PostedBy from Posts
update AspNetUsers set User_points = #value * 3
where ( AspNetUsers.Id = #postedby)
I dont know whether i am doing it right or not.
Two tables: AspNetUsers table with User_points column and Id Column as primary key
Posts table with PostId as primary key and PostedBy as foreign key referencing the AspNetUsers table.
Now, i want to compare PostedBy with Id column and if they both are same then update the User_Points column with +3 on every single message he posted.
Now, problem is:
1> It is inserting same number of points in every Row.It should check only currently inserted row and the PostedBy column of that row and then compare with Id column of other table and should Update user's Point of only that Id.
But same result nothing happens
Please tell me how to do it.
thanks in advance
change
select #postedby = PostedBy from Posts
to
select #postedby = PostedBy from INSERTED
'INSERTED' is a magic table that keep insert/updated data in this scope.
Same as this 'DELETED' table keep previous data in update a row
I have created a table using the dynamic columns feature in MariaDB:
CREATE TABLE items
(id INT NOT NULL PRIMARY KEY AUTO_INCREMENT,
name varchar(100) NOT NULL,
attributes BLOB);
INSERT INTO items (name, attributes) VALUES
('T-shirt', COLUMN_CREATE('color', 'blue', 'size', 'XL', 'price' '30.0'));
The dynamic column contains the columns color, size and price. How would I rename, for instance, the column price to amount, while actually retaining this column's content? I know about COLUMN_ADD and COLUMN_DELETE, but I haven't seen a COLUMN_RENAME function. Is there a way to do this?
My guess is that you would have to use COLUMN_ADD then use COLUMN_DELETE to re-add the same column data under a different name then delete the previous column name from the dynamic columns.
My table:
CREATE TABLE methods (
id INTEGER NOT NULL,
version INTEGER NOT NULL,
text TEXT NOT NULL,
PRIMARY KEY (id,version)
);
I would like the column id to auto-increment when null on a new row. I would also like the column version to be set to 1. I would like to store the auto-increment value in sqlite_sequence. When a row is inserted with id I would like version to increase by 1.
I have this at application level but need it at the database level and understand I will have to create a trigger or two.
I've found a few "would be" solutions for the classic "How do I insert a new record or update one if it already exists" but I cannot get any of them to work in SQLite.
I have a table defined as follows:
CREATE TABLE Book
ID INTEGER PRIMARY KEY AUTOINCREMENT,
Name VARCHAR(60) UNIQUE,
TypeID INTEGER,
Level INTEGER,
Seen INTEGER
What I want to do is add a record with a unique Name. If the Name already exists, I want to modify the fields.
Can somebody tell me how to do this please?
Have a look at http://sqlite.org/lang_conflict.html.
You want something like:
insert or replace into Book (ID, Name, TypeID, Level, Seen) values
((select ID from Book where Name = "SearchName"), "SearchName", ...);
Note that any field not in the insert list will be set to NULL if the row already exists in the table. This is why there's a subselect for the ID column: In the replacement case the statement would set it to NULL and then a fresh ID would be allocated.
This approach can also be used if you want to leave particular field values alone if the row in the replacement case but set the field to NULL in the insert case.
For example, assuming you want to leave Seen alone:
insert or replace into Book (ID, Name, TypeID, Level, Seen) values (
(select ID from Book where Name = "SearchName"),
"SearchName",
5,
6,
(select Seen from Book where Name = "SearchName"));
You should use the INSERT OR IGNORE command followed by an UPDATE command:
In the following example name is a primary key:
INSERT OR IGNORE INTO my_table (name, age) VALUES ('Karen', 34)
UPDATE my_table SET age = 34 WHERE name='Karen'
The first command will insert the record. If the record exists, it will ignore the error caused by the conflict with an existing primary key.
The second command will update the record (which now definitely exists)
You need to set a constraint on the table to trigger a "conflict" which you then resolve by doing a replace:
CREATE TABLE data (id INTEGER PRIMARY KEY, event_id INTEGER, track_id INTEGER, value REAL);
CREATE UNIQUE INDEX data_idx ON data(event_id, track_id);
Then you can issue:
INSERT OR REPLACE INTO data VALUES (NULL, 1, 2, 3);
INSERT OR REPLACE INTO data VALUES (NULL, 2, 2, 3);
INSERT OR REPLACE INTO data VALUES (NULL, 1, 2, 5);
The "SELECT * FROM data" will give you:
2|2|2|3.0
3|1|2|5.0
Note that the data.id is "3" and not "1" because REPLACE does a DELETE and INSERT, not an UPDATE. This also means that you must ensure that you define all necessary columns or you will get unexpected NULL values.
INSERT OR REPLACE will replace the other fields to default value.
sqlite> CREATE TABLE Book (
ID INTEGER PRIMARY KEY AUTOINCREMENT,
Name TEXT,
TypeID INTEGER,
Level INTEGER,
Seen INTEGER
);
sqlite> INSERT INTO Book VALUES (1001, 'C++', 10, 10, 0);
sqlite> SELECT * FROM Book;
1001|C++|10|10|0
sqlite> INSERT OR REPLACE INTO Book(ID, Name) VALUES(1001, 'SQLite');
sqlite> SELECT * FROM Book;
1001|SQLite|||
If you want to preserve the other field
Method 1
sqlite> SELECT * FROM Book;
1001|C++|10|10|0
sqlite> INSERT OR IGNORE INTO Book(ID) VALUES(1001);
sqlite> UPDATE Book SET Name='SQLite' WHERE ID=1001;
sqlite> SELECT * FROM Book;
1001|SQLite|10|10|0
Method 2
Using UPSERT (syntax was added to SQLite with version 3.24.0 (2018-06-04))
INSERT INTO Book (ID, Name)
VALUES (1001, 'SQLite')
ON CONFLICT (ID) DO
UPDATE SET Name=excluded.Name;
The excluded. prefix equal to the value in VALUES ('SQLite').
Firstly update it. If affected row count = 0 then insert it. Its the easiest and suitable for all RDBMS.
Upsert is what you want. UPSERT syntax was added to SQLite with version 3.24.0 (2018-06-04).
CREATE TABLE phonebook2(
name TEXT PRIMARY KEY,
phonenumber TEXT,
validDate DATE
);
INSERT INTO phonebook2(name,phonenumber,validDate)
VALUES('Alice','704-555-1212','2018-05-08')
ON CONFLICT(name) DO UPDATE SET
phonenumber=excluded.phonenumber,
validDate=excluded.validDate
WHERE excluded.validDate>phonebook2.validDate;
Be warned that at this point the actual word "UPSERT" is not part of the upsert syntax.
The correct syntax is
INSERT INTO ... ON CONFLICT(...) DO UPDATE SET...
and if you are doing INSERT INTO SELECT ... your select needs at least WHERE true to solve parser ambiguity about the token ON with the join syntax.
Be warned that INSERT OR REPLACE... will delete the record before inserting a new one if it has to replace, which could be bad if you have foreign key cascades or other delete triggers.
If you have no primary key, You can insert if not exist, then do an update. The table must contain at least one entry before using this.
INSERT INTO Test
(id, name)
SELECT
101 as id,
'Bob' as name
FROM Test
WHERE NOT EXISTS(SELECT * FROM Test WHERE id = 101 and name = 'Bob') LIMIT 1;
Update Test SET id='101' WHERE name='Bob';
I believe you want UPSERT.
"INSERT OR REPLACE" without the additional trickery in that answer will reset any fields you don't specify to NULL or other default value. (This behavior of INSERT OR REPLACE is unlike UPDATE; it's exactly like INSERT, because it actually is INSERT; however if what you wanted is UPDATE-if-exists you probably want the UPDATE semantics and will be unpleasantly surprised by the actual result.)
The trickery from the suggested UPSERT implementation is basically to use INSERT OR REPLACE, but specify all fields, using embedded SELECT clauses to retrieve the current value for fields you don't want to change.
I think it's worth pointing out that there can be some unexpected behaviour here if you don't thoroughly understand how PRIMARY KEY and UNIQUE interact.
As an example, if you want to insert a record only if the NAME field isn't currently taken, and if it is, you want a constraint exception to fire to tell you, then INSERT OR REPLACE will not throw and exception and instead will resolve the UNIQUE constraint itself by replacing the conflicting record (the existing record with the same NAME). Gaspard's demonstrates this really well in his answer above.
If you want a constraint exception to fire, you have to use an INSERT statement, and rely on a separate UPDATE command to update the record once you know the name isn't taken.