using bizTalk 2010 orchestration:
when i send data port configured as webservice the following error appear
The adapter failed to transmit message going to send port >"WcfSendPort_Service_ServiceSoap12" with URL "blablabla/Service.asmx". It will >be retransmitted after the retry interval specified for this Send Port. >Details:"System.Xml.XmlException: Root element is missing.
at System.Xml.XmlTextReaderImpl.Throw(Exception e)
at System.Xml.XmlTextReaderImpl.ParseDocumentContent()
at System.Xml.XmlTextReaderImpl.Read()
at System.Xml.XmlReader.MoveToContent()
at >Microsoft.BizTalk.Adapter.Wcf.Runtime.BizTalkBodyWriter.ValidateStreamContainsXml(Stream >stream)
at >Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfMarshaller.CreateWcfMessage(CreateWcfMessageSetti>ngs settings)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient2.SendRequestMessage(IBaseMessage >bizTalkMessage, IRequestChannel channel)
at Microsoft.BizTalk.Adapter.Wcf.Runtime.WcfClient2.SendMessage(IBaseMessage >bizTalkMessage)".
The crucial part of the exception is:
System.Xml.XmlException: Root element is missing.
This suggests that you are not transmitting what you think you are transmitting.
From the Suspended Message Instance, check that the message body that being sent is what you expect; or - change your Send Port Adapter to FILE and write the message out to the file system in order to check the message content.
Related
I have an orchestration that processes incoming messages that make a data call. If data is returned, a new message is created and sent back to the receive port via a "mover" BizTalk application. The original message is no longer needed, so I've been sending it to a discard folder. Is there a requirement in BizTalk that requires a message coming in to be sent out?
Each message that comes into BizTalk needs to be routed somewhere yes, otherwise it will suspend with a routing failure.
However as you are using an Orchestration, once it has consumed the message, and you don't need to send the original message anywhere from the Orchestration if you don't need it, when the Orchestration ends, that message will be gone
In message only scenarios, where you don't have an orchestration your options are
A file send port to a folder, where you have a script to clean them up
A null adapter on a send port, a null adapter is a custom adapter that takes the message from the message box and just discards it.
I've set-up two applications, one with FILE Receive Port and the other with a Send Port subscribing to that Receive Port with filter set as BTS.ReceivePortName == {ReceivePortNameHere}. I'm using BizTalk 2013 R2.
In the Receive Port, I'm using the pipeline 'BTAHL72XReceivePipeline'. And, in the Send Port, I'm using the pipeline 'BTAHL72XSendPipeline'.
When I drop a HL7 message into the Receive Port file location, it produces the error:
The Messaging engine failed to process a message submitted by
adapter:FILE Source URL:E:\InboundToBizTalk\*.hl7. Details:The
published message could not be routed because no subscribers were
found. This error occurs if the subscribing orchestration or send port
has not been enlisted, or if some of the message properties necessary
for subscription evaluation have not been promoted. Please use the
Biztalk Administration console to troubleshoot this failure.
However, I do have a subscription set. Why is this error occurring? Is there an issue with the pipeline component or the way I am using it?
On the Group Overview page search for "Subscriptions" and filter based on your Send port name.
Verify that you see an activation Subscription and confirm that the filter conditions on the subscription are correct.
The by far most likely causes:
A typo between the Receive Port Name and the value in the Filter.
The Send Port is not Enlisted or Started.
Do not use quotes in the filter property.
Turned out to be ACK which could not be routed therefore causing the whole flow to error. For an MLLP transport type, it is two way thus the ACK can be routed. For a FILE transport type, it is one way therefore ACK needs to be accounted for separately.
To get around this, another port was created which would subscribe to the ACK.
I am using BizTalk Server 2009 to send EDI messages to my client using AS2. I am able to send messages, but getting an error while sending messages that exceeds 5KB of file size. I checked with the partner whether they are using any restrictions on file size, but they are able to exchange even some GB's of files with other trading partner.
I compared the files that are successfully sent with the one that failed. But found no difference between two except LIN, PIA, QTY and other segments.
I found the below error when tracked in event viewer.
The adapter failed to transmit message going to send port "SendTextFile" with URL "http://xxclienturlxx.com:2080/ipnet/as2". It will be retransmitted after the retry interval specified for this Send Port. Details:"The remote server returned an error: (500) Internal Server Error.".
How do I resolve this?
Found the solution..
In BizTalk 2009, disabling "Enable chunked encoding" in Send port Transport type properties did the trick for me...
To have large message support when the size of the message is greater than 48 KB, the http send adapter is sending the data in chunks to the server instead of a full stream"
This post HTTP Send Adapter - Submit to ASP Page Issue helped me to find the solution.
I have an orchestration that takes a message. The target namespace is "http://microsoft.com/HealthCare/HL7/2X" and the root element is "ORU_R01_23_GLO_DEF"
In the orchestration, I map the message to an intermediate message type in a construct shape. The target namespace is "http://mycompany.com/myapplication" and the root element is "MyMessage". The "MyMessage" message is then further mapped and then sent to a web service using a logical send port in the orchestration. A WCF send port is then bound to the orchestration and everything works fine. Everything works as expected.
Without altering the orchestration, I want to create a send port that subscribes to the intermediate "MyMessage" message and writes it to a file. To do this, I have created a send port with a filter of BTS.MessageType = http://mycompany.com/myapplication#MyMessage.
Even though messages are flowing through the orchestration, my send port isn't picking up the message. Is this the incorrect filter to use?
Are you trying to subscribe to the 'MyMessage' message, or the same message that is sent to the logical Send Port bound to the physical WCF Send Port?
You have stated that:
The "MyMessage" message is then further mapped and then sent to a web service using a logical send port in the orchestration. A WCF send port is then bound to the orchestration and everything works fine.
Message not Published to MsgBox
From what you have described, I would suggest that you do not have a Send Shape/Logical Send Port combination in your orchestration for the 'MyMessage' message, which is why you can't manually subscribe to this message type in a Send Port filter. The fact that you have not mentioned a 'Failed Routing Report' message further suggests that this is the case - this message type is generated when no subscriotion can be found for a message that is to be published to the MsgBox.
Capture a Message's 'MessageType'
If however you need to capture a copy of the message your are sending over the WCF Send Port, you will need to determine its MessageType and use that in your second Send Port subscription that writes the message out to file.
If you are unsure as to what MessageType to use, there is a simple trick to determine this information:
Stop (not Unenlist) the WCF Send Port
Send a message through your orchestration as normal - the message will be marked as 'Suspended Resumable' in the BizTalk Admin Console on the WCF Send Port.
Open the message in the BizTalk Admin Console and view its 'Message Context'; in the Message Context you will see its 'MessageType' property which you can then use to understand which subscription filter to use.
Start the WCF Send Port to flush the message.
Alternatively, if you don't want to change your orchestration, you could try archiving your message as it passes through the Send Pipeline in the (original) WCF Send Port - either write your own archiving component or use an existing commercial component. By using an archiving component in this manner, you will save yourself the expense of an extra subscription and the associated Send Port maintenance.
Update:
It sounds very much like the OP is not sending the intermediate message to the Message Box from their Orchestration (see comments). Message subscription will only work when a message is published to the Message Box - in this case, the message in question ('Message B') is an intermediate message that only lives within the context & lifetime of the orchestration. The OP needs to Send the message to a Direct Bound port within the Orchestration to allow the message to be subscribed to via a Send Port.
Verify the pipelines of the Send Port. Should by XML, not Passthrougth.
I got a IP Communications new account having following paramters:
Originating IP Destination IP Protocol Codec Ports
(for example)65.154.35.210 , 202.124.43.256 , SIP , g729 / , 2
Now i want to use it in default application of FMG i.e:
http://download.macromedia.com/pub/labs/flashmedia_gateway/flashmedia_gateway_sample_flashphone.swf
Its showing me connecting ...
Status is not getting update like: "Connection Failed" or "Connection Success".
Please tell me how to use the above information in this app, or please sugets me an app any other app to experience FMG.
Regards
Ankush
If you are opening a socket connection, refer to the documentation and different events which are dispatched by the Socket class. Add event handlers to the following events and update the message box when the corresponding events fire.
close: Dispatched when the server closes the socket connection.
connect: Dispatched when a network connection has been established.
ioError: Dispatched when an input/output error occurs that causes
a send or load operation to fail.
securityError: Dispatched if a call to Socket.connect() attempts to
connect either to a server outside the
caller's security sandbox or to a port
lower than 1024.
socketData: Dispatched when a socket has received data.